grampa1114 Posted August 14, 2011 Posted August 14, 2011 So the depth finder that came with the boat has been great until now. X51 Lowrance with speed and distance and temp...oh yeah and depth both on a gray line chart and a digital number above the temp....presently will not show a correct digital read out. Any ideas? Quote
Todd Driscoll Posted August 15, 2011 Posted August 15, 2011 Which specific digital reading is not working - depth? If so, other than no digital depth, are you still getting good sonar readings on the display? Quote
grampa1114 Posted August 15, 2011 Author Posted August 15, 2011 That is correct...so I assume that the transducer is still ok...also other than the number, it is accurate and therefore still useable...Oh yeah...the field shown has to be preset and will not shift automatically...I've been able to function on 15' nicely. Quote
Todd Driscoll Posted August 16, 2011 Posted August 16, 2011 That is correct...so I assume that the transducer is still ok...also other than the number, it is accurate and therefore still useable...Oh yeah...the field shown has to be preset and will not shift automatically...I've been able to function on 15' nicely. Try a hard reset, this will restore all settings to factory defaults. 1. Turn the unit OFF 2. Press and hold the UP arrow key. 3. Press and hold the PWR key. 4. Production test mode will appear. 5. Press clear 5 times and you will see System Info Screen 6. Press MENU/DOWN and the unit will shut off Quote
grampa1114 Posted August 16, 2011 Author Posted August 16, 2011 Thank you...I just completed that reset...I'm going out tomorrow and will give results...appreciate your time... Grampa Quote
grampa1114 Posted August 19, 2011 Author Posted August 19, 2011 Well I went out yesterday and there was no change....I am wondering if a total factory rebuild is possible... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.