Jump to content

Recommended Posts

Posted

I am wanting to buy a new crankbait rod, $150 range and want a good overall crank rod for shallow, med, and deep diving. Thanks!

  • Super User
Posted

if you did a search for crankbait rods on the forum you would have a lot of reading to do.

http://www.***.com/Shimano_Compre_Crankbait_Casting_Rods/descpage-SNCC.html

http://www.***.com/Falcon_LowRider_XG_Casting_Rods/descpage-FLRC.html

those are the 2 i would suggest. the Lowrider if youre tossing bigger baits.

Posted

Look into the Powell Max Crankbait rods. They offer both glass and graphite and both are great CB rods! B)

Posted

I have read on this forum and there is a lot lol bit thanks for the feedback

Posted

Shimano Compre is a superb rod for the money. Ultimate crankin stick for me is the St Croix Avid AVC70MM or AVCMHM so if you can find one of those in your price range that would be sick.

I have a Powell Max as well but its a lightweight bottom contact but crankin so I won't comment.

Posted

Check out the Cabelas Prodigy PDC705-1 and PDC705-2 both are MH/MF $99.99

http://www.cabelas.com/product/Fishing/Fishing-Rods/Casting-Rods%7C/pc/104793480/c/104764680/sc/104823180/Cabelas-Prodigy174-Casting-Rods/703905.uts?destination=%2Fcatalog%2Fbrowse%2Ffishing-fishing-rods-casting-rods%2F_%2FN-1102351%2FNs-CATEGORY_SEQ_104823180%3FWTz_l%3DPPC%253Bcat104793480%253Bcat104764680&WTz_l=PPC%3Bcat104793480%3Bcat104764680%3Bcat104823180

You might also the Kistler Mag TA CRR rod which is $160.00 I believe.

I have the Prodigy and the older Model Kistler and both work great. The Kistler is a M/MF while the Prodigy is a MH/MF and comes in both a one and two piece model.

Posted

Thank you for the advice. Also, why does a moderate action matter and why is a fast action as effective?

Posted

I use a cumara reaction crank, and fished a loomis GLX crank. Handled most of the popular ones in the shop including dobyns 704.

Honestly, IMO, any crank rod isn't exactly better than another. I think you should pick the one that feels good in your hand, balances with your reel, has the action that you prefer and the power that you need. Then spool with fishing line based on how much it stretches, to fine tune the amount of 'give' your rod will allow depending on the severity of your hookset. Most important would be to determine the reel you want first. A light unbalanced rod, will feel heavier than a balanced heavy rod.

This is the advice I've been given by a local pro, and I think it's solid advice.

$300-$400 dollar rods are better spent on applications where sensitivity is paramount.

  • Super User
Posted

I use a cumara reaction crank, and fished a loomis GLX crank. Handled most of the popular ones in the shop including dobyns 704.

Honestly, IMO, any crank rod isn't exactly better than another. I think you should pick the one that feels good in your hand, balances with your reel, has the action that you prefer and the power that you need. Then spool with fishing line based on how much it stretches, to fine tune the amount of 'give' your rod will allow depending on the severity of your hookset. Most important would be to determine the reel you want first. A light unbalanced rod, will feel heavier than a balanced heavy rod.

This is the advice I've been given by a local pro, and I think it's solid advice.

$300-$400 dollar rods are better spent on applications where sensitivity is paramount.

Sensitivity can be paramount in cranking, many, many, many different aspect of cranking.

I fish Cumara, Loomis, now have a Lamiglas and a couple others. The more expensive glass rods are worth their weight in gold, from my initial impressions of high quality glass rods. The lowest quality I would go on a crankbait rod is the St. Croix Avid, with the exception being the Premier Glass, probably.

Posted

Purchased the mojo big cranker and had my doubts at first. Had a hard time staying hooked up with fish. Changed line to 14 floro and now I don't want to fish with any other stick! I think if you find a rod that you are comfortable with and refine your line and baits, you will be happy

Posted

Sensitivity can be paramount in cranking, many, many, many different aspect of cranking.

I fish Cumara, Loomis, now have a Lamiglas and a couple others. The more expensive glass rods are worth their weight in gold, from my initial impressions of high quality glass rods. The lowest quality I would go on a crankbait rod is the St. Croix Avid, with the exception being the Premier Glass, probably.

You need to try a Carbonlite. 7' MM is tough to beat. I prefer it over the Avid, but I have not fished the Lamiglas 705, though I plan on getting one soon.

  • Super User
Posted

I have tried the Carbonlite, it isn't a bad rod but I really dislike the components and the resins in the rod. (The latter appllies only to the MedMod). I've been continually impressed by higher quality rods by comparison, but was asked recently to test a Mojo Glass. I'm fishing that tomorrow for the first time, side by side with the Lamiglas and the Dobyns.

Posted

I recently got a Powell Max 706CB (graphite) and I love it so far. It's actually pretty versatile, too. It worked great the other evening, working a Zara Spook Jr.

Posted

Thanks everyone! If I got a rod with a fast action on it, would that be a bad thing?

  • Super User
Posted

Thanks everyone! If I got a rod with a fast action on it, would that be a bad thing?

Bad thing ? Not really but for cranks you should stick with a moderate or moderate fast rod. JMO B)

Posted

I just bought one of these www.tigerodz.com . I got a 7' mh canoe creek glass cranking model just for bigger cranks but the 7' med feels like a great all around crankbait rod. I haven't had mine long but so far I like it alot. They are made in America have micro guides and a warranty. Set me back $100.

Posted

I have an AVC70MM and I love it for shallow cranks. Never used another cranking rod though so I can't compare it with anything.

  • Global Moderator
Posted

I have tried the Carbonlite, it isn't a bad rod but I really dislike the components and the resins in the rod. (The latter appllies only to the MedMod). I've been continually impressed by higher quality rods by comparison, but was asked recently to test a Mojo Glass. I'm fishing that tomorrow for the first time, side by side with the Lamiglas and the Dobyns.

Let me know what you think of that Mojo cranking rod. I'm not digging my Skeet Reese cranking rod and will probably be on the market for a new cranking rod this winter and that one may be an option.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.


  • Outboard Engine

    fishing forum

    fishing tackle

    fishing

    fishing

    fishing

    bass fish

    fish for bass



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.