Shimano Saros Bearings Already Dry?

[BILLYsobx]

My Saros is 2 months old and I have rarely used it. It was very quiet and smooth when I bought it. Now the bearings sound dry. It makes a scrubbing noise about every half turn of the handle and there is already oil coming out the housing. Do you think I should lube the reel or send it back before cracking the seal???

[SirSnookalot]

I'd send it back.

[ChiCityBasser]

Its a Shimano product so that should be expected lol, Seriously I would check with DVT before cracking the seal or send it back.

[Delaware Valley Tackle]

If you have the receipt and can return it, go that route. If that doesn't work out, send it in and we'll have a look.

[.RM.]

My Saros is 2 months old and I have rarely used it. It was very quiet and smooth when I bought it. Now the bearings sound dry. It makes a scrubbing noise about every half turn of the handle and there is already oil coming out the housing. Do you think I should lube the reel or send it back before cracking the seal???

That doesn't sound like a bearing. It does however sound like you are missing a RD3455 (spool washer) there is usually a stack of 3 sitting on the spool axle just under the spool. It adjust the spacing of the spool edge from the rotor when oscillating on the inward stroke. If the stack isn't properly spaced, I would look in the box for the extra one. If the washers are all there, I would return the reel.

Good Luck & Tight Lines!

[BILLYsobx]

Thanks to all.... I have not removed or added any of the spacer washers but I will check.. I plan on sending it back. Thanks again it just sucks I have never had problems with shimano reels

[rubba bubba]

Strong, smooth, silent and reliant.

[Fat-G]

Strong, smooth, silent and reliant.

LOL. *reliable*