Jump to content

Recommended Posts

Posted

Ondrejka, don't feel bad. I too had outboard troubles. Speaking of that, does anyone know there way around a 1988 Force 50 hp?

  • Like 1
Posted

Ondrejka, don't feel bad. I too had outboard troubles. Speaking of that, does anyone know there way around a 1988 Force 50 hp?

Check with any mercury dealer/service center and they should be able to help you, or at least point you in the right direction. To my knowledge the parts for those old Force outboards are hard to come by anymore.

  • Like 2
Posted

Ondrejka, don't feel bad. I too had outboard troubles. Speaking of that, does anyone know there way around a 1988 Force 50 hp?

I had a 88 85HP on my first boat, one of the reasons I went Yamaha this time.  There is one guy over in Raytown that worked on mine, not sure if he wants his name out on a public forum.  PM me if you want his number.  Parts are really hard to find and they will most likley be used or rebuilt.  I'm sure any decent marine mechanic can figure out the problem.

Posted

Ondrejka, don't feel bad. I too had outboard troubles. Speaking of that, does anyone know there way around a 1988 Force 50 hp?

Theirs a guy by Hillsdale that worked on my force 85 but these engines always have trouble
Posted

Theirs a guy by Hillsdale that worked on my force 85 but these engines always have trouble

Hew worked on an old Johnson for me a few years back did good work at a fair price.

Posted

Theirs a guy by Hillsdale that worked on my force 85 but these engines always have trouble

Maybe I should have been more specific. I'm not sure if it's actually the motor but the steering is extremely difficult. The motor runs fine but steering not so much. Just need it to last me a few more years so I can get something nicer.

Posted

Maybe I should have been more specific. I'm not sure if it's actually the motor but the steering is extremely difficult. The motor runs fine but steering not so much. Just need it to last me a few more years so I can get something nicer.

Probably need a new steering cable.

  • Like 1
Posted

I was wondering

Probably need a new steering cable.

I was wondering about that. I may try to disassemble it this week and clean/re-grease it and see if that helps. Thanks for your help and recommendations everyone

Posted

I was wondering

I was wondering about that. I may try to disassemble it this week and clean/re-grease it and see if that helps. Thanks for your help and recommendations everyone

 

There should be an adjustment you can make to loosen/tighten the steering. My dad has done mine before, so I'm not sure exactly what it is, but it's usually a quick fix.

Posted

Late, but thinking of running to Melvern Tuesday AM. Got open back seat if anybody wants to go. PM me and I'll give you my phone number.

  • Like 1
Posted

I was wondering

I was wondering about that. I may try to disassemble it this week and clean/re-grease it and see if that helps. Thanks for your help and recommendations everyone

if ya need help holler, I am at Antioch and 91st.

Posted

Made my first trip to Lone Star today, was not impressed with this lake. NO WAKE on the entire lake I don't understand!!!!!! I caught probably 15 LMB up to 2#.

Posted

OK what lake do you guys think is the best choice, I'm taking a friend of a friend who is just starting out fishing and I've narrowed it down to melvern, Osage, and la cygne?

Posted

OK what lake do you guys think is the best choice, I'm taking a friend of a friend who is just starting out fishing and I've narrowed it down to melvern, Osage, and la cygne?

I would go to Melvern. Don't know anything about Osage, but LaCygne can be tough at times.

Posted

Go to Coffey county between, sat. Sun, and Today caught around 80 smallmouth combined by myself. Vast majority were between 14-16 inches. Counted 7 that were 17-17/12. No pigs but there in there. Caught some nice blacks too. Probably 6 boats on lake at all times. I fished from 7:30 -230. There in the grass. Wind is a big help. Once it got dead calm and high sky's today it got tough. Coffey county is a Catching lake not a fishin lake. Guys are catching fish on the riprap too. Had them trying to take the bait out of another's mouth as I was bringing it in. Haven't seen that since winter fishin on table rock with the a-rig.

Posted

Go to Coffey county between, sat. Sun, and Today caught around 80 smallmouth combined by myself. Vast majority were between 14-16 inches. Counted 7 that were 17-17/12. No pigs but there in there. Caught some nice blacks too. Probably 6 boats on lake at all times. I fished from 7:30 -230. There in the grass. Wind is a big help. Once it got dead calm and high sky's today it got tough. Coffey county is a Catching lake not a fishin lake. Guys are catching fish on the riprap too. Had them trying to take the bait out of another's mouth as I was bringing it in. Haven't seen that since winter fishin on table rock with the a-rig.

That sounds crazy I'll will definitely have to give it a try thanks

Posted

Lost a real heartbreaker at Lone Star tonight. Probably would have topped 6+. Went back to the same dock 3 times before dark and nothing. Got it on my GoPro too. Not sure if I can even stand to watch the footage..UGH.

Posted

I was talking to a buddy on the phone telling him to forget hunting and come fishing. I had my lure in the water with about 4' of line in the water drifting over the grass patches with the wind not payin attention and I caught a 16"er. They aren't going anywhere. Once they move in the grass like that they will be there for awhile. Never saw a single boat fishin that cover for three days. Not sayin they weren't killing them too on the riprap but it was hard to leave those fish. Lakes down about 3-4 foot.

Posted

Made my first trip to Lone Star today, was not impressed with this lake. NO WAKE on the entire lake I don't understand!!!!!! I caught probably 15 LMB up to 2#.

No, it is not the entire lake. Only where it's posted which is pretty much just the two main coves. Give it a few trips. That lake has some huge fish, I've caught them.

  • Like 1
Posted

No, it is not the entire lake. Only where it's posted which is pretty much just the two main coves. Give it a few trips. That lake has some huge fish, I've caught them.

I agree I was their last weekend and have a nice get off too but once I got to the coves nothing

Posted

I agree I was their last weekend and have a nice get off too but once I got to the coves nothing

 

Beat the cove with the docks up with T-rigged plastics. They just can't resist. Here's a 5# and 4.5# from the past few months. Not to mention the giant I lost tonight. Lone Star is a gem.

 

5lbs. 6oz. - Lone Star

Lone Star 4.29#

 

Posted

Beat the cove with the docks up with T-rigged plastics. They just can't resist. Here's a 5# and 4.5# from the past few months. Not to mention the giant I lost tonight. Lone Star is a gem.

Not going to lie didn't realize they got that big!

  • Like 1
  • Super User
Posted

For anyone wanting to fish Miola/Paola Thursday night I did make it there Sunday for a couple hours. I had my son with me so I didn't fish a ton. The fishing was a little tough but I think that was still from the cold front. The water temp was 70* hopefully by Thursday the bite should pick up.

For those of you that haven't fished paola before it's a very nice lake with something for everyone. It has a rocky dam, boat docks, weedy shoreline and some deep structure like brush piles and a 20' deep submerged bridge.

I know of at least one 6# that came out of that lake (into a skillet) but I'd be shocked if we drug out anything close to that big unless it's one of the 60# Flathead I know were released back into the lake.

I may try and fish it again tomorrow night.

  • Like 1
Posted

Made my first trip to Lone Star today, was not impressed with this lake. NO WAKE on the entire lake I don't understand!!!!!! I caught probably 15 LMB up to 2#.

thought you went to melvern :Idontknow:

Posted

thought you went to melvern :Idontknow:

Should have......but no backseater so didn't want to go that far all alone.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.



  • Outboard Engine

    fishing forum

    fishing tackle

    fishing

    fishing

    fishing

    bass fish

    fish for bass



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.