My Fuego "rattles"

[Boogey Man]

Need some advice about a Fuego baitcaster. I makes a rattling sound on the cast and on a fast retrieve it's a combination rattle/clacking sound. I took it apart and gave it light cleaning/oiling but same noises. Could it be the Magforce Z? Thanks in advance.

[ArcticCat500]

crank, there's a member here under the name Jfrancho, look him up, he owns and operates Reel Smooth Reels, talk to him and explain your problem.  I'm sure he'll be able to solve your problems.  I don't let anyone else service my reels, Anyone!

[burleytog]

How loose is the spool tension knob?

[Boogey Man]

How loose is the spool tension knob?

Tight enough that there's no lateral movement of the spool during the cast and retrieve.

[Uncle Leo]

A Mag brake will make a whirling type noise with a lot of spool speed but not a rattle. I wonder if something may be loose in the Mag brake?

[Delaware Valley Tackle]

It's really hard to diagnose something without seeing it. Does the rattle occur only when the spool is spinning fast?Have you tried different mag settings to see if that makes any difference? Are there any other symptoms? Did this just start? You're welcome to give me a call if you'd like: 973-459-2835.

Mike

[Boogey Man]

A Mag brake will make a whirling type noise with a lot of spool speed but not a rattle. I wonder if something may be loose in the Mag brake?

Yes, it's only during a hard cast or a fast retrieve. On a normal cast or fairly slow retrieve it sounds OK. I was thinking something is loose in the Mag break as well. Might be my project for this evening ;D

[Boogey Man]

It's really hard to diagnose something without seeing it. Does the rattle occur only when the spool is spinning fast?Have you tried different mag settings to see if that makes any difference? Are there any other symptoms? Did this just start? You're welcome to give me a call if you'd like: 973-459-2835.

Mike

Yes, this just started this fishing season, last fall it was OK. I haven't tried adjusting the mag brake to see if it makes any difference. I'll try that this evening. And it does only happen when the spool is spinning fast.

[.RM.]

I makes a rattling sound on the cast and on a fast retrieve it's a combination rattle/clacking sound.

If it were my reel I would be checking everything on the spool. The spool support bearing just behind the engagement pin and the palming plate side.

I have heard bearings under load make that sound...........

Good Luck & Tight Lines!!!

[Boogey Man]

OK, I think I had a dry bearing. I had oiled the bearings, the one the spool shaft and the one in the palming plate but I put another small drop on each one. The noise is better, I don't know if I'd say cured, but better. Thanks so much for the help!