Gear ratios inside a reel

[fishin4ever]

Hello to all, while I recently found out that it's possible to upgrade bearing inside a reel....I wanted to know if it's possible to upgrade or have the gear ratios CHANGED.  If so can you please post a website or contact information.  Thanks to anybody that replies to this post....tight lines.

[Delaware Valley Tackle]

Gear ratio changes can be made in certain circumstances. PM, call the number in our ad or go to http://www.delawarevalleytackle.com/home

Thanks,

Mike

[ksbasser]

If your reel was offered in different gear ratio sizes, then you can order a different size pinion and main gear from the customer service dept. of the reel company. Just swap them out and your done.

[SWMIBASSER]

What reel are you talking about?

[fishin4ever]

Thanks guys and I'm talking about that pass pro shops carbon lite casting reel.  It only comes in one gear ratio.

[J Francho]

Just get a reel with the retrieve speed you want.

[21farms]

sometimes it's more than just the main gear and the pinion gear. as the main gears for different ratios are different diameters, the key washer(s) and the drag washer(s) should be sized to match, especially if the key washers are eared. you can get away with reusing the key and drag washers from a lower ratio gearset when going to a higher ratio (although you lose some surface contact area and, presumably, some drag force) but not the other way around. if the key washers are eared, that should definitely be changed.

[SWMIBASSER]

Thanks guys and I'm talking about that pass pro shops carbon lite casting reel. It only comes in one gear ratio.

I'm about 95% here. It's the same design as the Pro Qualifier so the below should work. But I've not done it myself.

A Pflueger patriarch has a Duralumin gear set in 7.1.1 This will make for a faster reel without increasing weight. Which you don't want to do as that is one of the key features of that reel.

If you don't mind increasing the weight the 5.2.1 and 4.7.1 from the Pro Qualifier should swap right in. When swapping from Duralumin gears which you have in that reel, to brass gears, you WILL increase the weight quite a bit.

The drag washers regardless of ratio should be the same.  I would have to double check part numbers but I'm pretty sure a Revo uses the same washer regardless of ratio. I believe the BPS reels do as well.

[fishin4ever]

Thanks swimbasser, i just might have to check into the pro quailifer

[NBR]

You will need to call Bass Pro Shops.