dvdrd423 Posted October 16, 2008 Posted October 16, 2008 WILL BRAIDED LINE HURT THE EYE'S ON THE ROD? Quote
Super User Grey Wolf Posted October 16, 2008 Super User Posted October 16, 2008 Usually no unless you are using cheapie rods. Quote
Bassboss Posted October 16, 2008 Posted October 16, 2008 Bass-Bart but nice and simple! Unless you have a piece of junk for a rod, it should be fine on the rod. good luck to ya! Quote
Big O Tires Angler Posted October 17, 2008 Posted October 17, 2008 As long as you have a good ceramic guide it should be fine...a lot of the cheaper reels that have just chrome guides will get torn apart fairly quickly. Quote
Matt 825 Posted October 17, 2008 Posted October 17, 2008 No it will not ruin your guides. I use Braid 90% of the time and have never had a guide wear down. Quote
Super User MickD Posted October 22, 2008 Super User Posted October 22, 2008 I agree with those who say that with good ceramic guides, you should have no problem. But, with enough line through the guides, guides will groove more quickly with braid than with mono. The most likely trouble spot is the tiptop, so just check it every year as you are cleaning rods up for winter storage. If you find the tiptop grooved, check the other guides-most likely they will be ok. If the tiptop is grooved it is a simple job to remove it and replace it. To remove one, just put a loop of line through the eye, put tension on the line, and heat the tiptop until it slides off. Use hot melt or ferrule cement to glue on a new one and you're good to go again. The main thing to remember is to not overheat the blank. That is why I suggest putting tension on the tiptop before heating it. It will slide off before the heat becomes enough to damage the blank. Quote
Bayou Bass Posted October 23, 2008 Posted October 23, 2008 IThe most likely trouble spot is the tiptop, so just check it every year as you are cleaning rods up for winter storage. k. What is winter storage? : Quote
Super User MickD Posted October 23, 2008 Super User Posted October 23, 2008 I expect from your handle, Bayou something, you don't know much about winter storage. Lucky you. Our water gets a little hard up here, and I clean my gear up, winterize the boat/motor, put my roadster in the pole building, and get to work on building rods. Quote
Super User roadwarrior Posted October 23, 2008 Super User Posted October 23, 2008 What is winter storage? December 25 when you have to stay home with the family! 8-) Quote
Super User flechero Posted October 24, 2008 Super User Posted October 24, 2008 What is winter storage? December 25 when you have to stay home with the family! 8-) Funny you said that... 2 years in a row, I got rods as gifts for my brothers so we could fish on Christmas day! ;D Quote
Bassaholic007 Posted October 25, 2008 Posted October 25, 2008 Yes, I've had a couple rod tips develop grooves in them from braided line. these are st. croix rods too!! Quote
Super User Grey Wolf Posted October 25, 2008 Super User Posted October 25, 2008 Yes, I've had a couple rod tips develop grooves in them from braided line. these are st. croix rods too!! What line of st. croix rods were they ? Quote
Super User Wayne P. Posted October 25, 2008 Super User Posted October 25, 2008 The super lines cannot groove quality rod guides since the material is basically plastic (Gel Spun Polypropylene). Polyproylene is a thermoplastic polymer. Those that fish in muddy water a lot will get sand (which in most areas is silica (silicon dioxide, or SiO2) particles imbedded in the fibers and that is what will damage the guide /inserts since the silica is as hard or harder than the guide material. Some may experience what they think is line damaged rod guides but more likely those cases are a result of the rod being dropped or struck onto a hard surface which will crack the fragile guide inserts. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.