justtrying Posted May 24, 2007 Posted May 24, 2007 david, long time. ... have been fishing "LOTS" so, not much time for anything else. i have a curado 100d that i use for a winch on a flipping rod. it got dirty, so, i decided i'd do a "quick" clean/lube yesterday ...30-45 min (i thought) ...2 hours later & it's not Working! problem --- cleaned, greased, etc., & everything was fine ...til i tried to turn the handle ...wouldn't turn!!! after 2 hrs, i've identified the culprit as the 2394(roller clutch inner tube). just as soon as the two little ends go into place in the key washer, the handle will no longer turn. i can put everything else together & all works fine, but, as soon as i put that part in, it locks the drive shaft so that it no longer turns. i am at wits end, have taken top cover off "many" times, but, no go when the 2394 is inserted. ...any ideas???? ronnie Quote
Super User burleytog Posted May 24, 2007 Super User Posted May 24, 2007 I'm not Dave (but I did stay at a Days Inn last week ), but... Leave the part out? :-? Quote
Guest DavidGreen Posted May 25, 2007 Posted May 25, 2007 justtrying, Sorry for the long delay, didn't see this post until now, you should have PM'd me.. Yup you put the Roller bearing pack in upside down. It only rolls one way, turn it over and I'll bet your reel works like it should... Good Luck... Quote
justtrying Posted May 25, 2007 Author Posted May 25, 2007 hey bud, thanks, and, YES< you're right... before i read your post, i turned that little darling over the next time i went out to the shop & "VOILA" ...worked like a charm.. i knew i should not have spent so long without just walking away & "rethinking" things, but, it was so simple a matter... anyway, THANK YOU very much for your post. i really appreciate your expertise & just wish that members on this board knew how Many, Many, Dollars worth of info that you've freely shared with us/them. you're a class act. ronnie Quote
Guest DavidGreen Posted May 25, 2007 Posted May 25, 2007 justtrying, Great, glad its working properly now. Any time you need any help quick PM me. Tight Lines Bud !!! Quote
vicdotcom Posted May 26, 2007 Posted May 26, 2007 anyway, THANK YOU very much for your post. i really appreciate your expertise & just wish that members on this board knew how Many, Many, Dollars worth of info that you've freely shared with us/them. you're a class act.ronnie Agreed! The articles on your website has helped me immensely especially the one on baitcasters. Thank you Vic Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.