Metanium thumb bar grip

[Skeeloco]

I grabbed me a great condition Metanium '16 off eBay. I love the reel but found out it has one fault...the thumb bar rubber will pop off on you. I was lucky to not lose it the first time. Superglued back on but I can tell it's loose and will likely pop off again...superglue doesn't bond too well to rubber nor metal. Is epoxy a good idea? 

[PhishLI]

18 minutes ago, Skeeloco said:

Is epoxy a good idea?

This is a much better idea:  Liquid Nails Fuze*It - All Purpose Adhesive

 

Clean both surfaces with alcohol first. Have patience and give it a few days to cure and the bond will be awesome and remains flexible. Use mineral spirits for cleanup.

[ABU is overpriced]

Standard super glue from Gorila should hold it without any issues. Have had this done twice over the years. Just clean it with 99% alcohol before applying glue, and let the glue bond overnight.

[FishTank]

Marine Goop, then wrap the thumb bar with masking tape, and wait about 24-36 hours to remove the tape.

[bulldog1935]

no rubber grip, but KDW makes an easy alloy clutch bar replacement

https://www.hedgehog-studio.co.jp/product/1763

[PhishLI]

4 hours ago, FishTank said:

Marine Goop,

Same general idea as Fuze*It. Glue that's waterproof and compliant instead of brittle like CA glue(s), even gel types.