heavy

[Cajun1977]

whats the heaviest line you would use on a spinning reel?

[flechero]

That purely depends on the size of the reel.  20# is the heaviest I have used but that was on a surf rod... 14# was the heaviest on a bass rod. (shimano 4000 size reel)

[Cajun1977]

someone asked me the question  why is a baitcaster  able to hold more line then they asked whats the max line you would use on a spin reel and why?    say a 2500   stradic

[CyBasser]

whats the heaviest line you would use on a spinning reel?

It boils down to what capacity the reel has. In theory, you can use 80lb mono on a 3000-size reel but it will only take 20 or 30 yards!

With spinning reels, keep in mind that for optimum casting range you need the thinnest line possible. The reason for that is that with a thicker line, once the first few meters fly off the spool, the friction of line with the lip of the spool slows (for use of a better word) the rate with which line leaves the spool and consequently you get less distance. With an identical rod, reel, and lure, and with the spools filled to the same level (I fill them to 1/16th" of the lip) I get at least 10-15 yards more range on the 10lb line rather than the 14lb!

What you need to consider is the capacity of the reel in relation to the casting range required and how heavy the structure you are fishing is.

I use 2000-3000 size spinning reels for bass fishing (various models). The line capacities on these reels allow about 130 yards of 12lb mono. When I was using mono I would fill one spool with about 150 yards 10lb for long range open water fishing, another with 80-90 yards of 14lb for heavier structure fishing (such as flipping in shoreline bushes) and an all-around spool with 120-130 yards of 12lb mono for intermediate situations. Unless I knew from beforehand what sort of fishing I would encounter, I would start with the 12lb, then move up or down by changing spools as conditions warrant.

I have solved though most of these problems in regards to spinning equipment by switching to braid. With 20lb braided line I get lots of abrasion resistance, lots of power, and significantly increased casting range as the line diameter is equal to 6lb mono. OK, I'm loosing in respect of using a more-visible-to-fish line, but in the rare occasions when this could be an issue, I opt for a fluoro 20lb leader.

[Low_Budget_Hooker]

12 is the max I use, clear water, 3000 series reels.

My lake doen't have alot of things to hang up on and we very rarely go anywhere near shore.  Mostly open water fishing.

[jdw174]

I've gone as high as 14#, but current rods are all spooled with 10#SST.  One exception is my worming rig which has 12#.

[justfishin]

I use #6 or #8 on all my spinning reels. I only own  the 2000 or 2500 series Stradic's though as far as spinning reels. I think they are 130 yard of #8. I guess if I went to a 4000 series I wouldn't be afraid to go to #12-#14. I only use mono and  never liked braid but, I guess braid would change this. For me if I go higher than #8, even to #10, I switch to one of my Curado or Abu Garcia baitcasters. Every one has his or her own personal preference. Whatever works for you is what you should use. Just my opinion.

[Guest avid]

Totally relates to the size of the reel and what your needs are.

You can put 30# test braid on a spinning reel and have it only equal the diameter of 8 lb mono.   With the advancement in technology the old "light line for spinning" is no longer appropriate.

By the same token, many baitcasters are capable of handling light lines and lures.  So you can take your pick.

[roadwarrior]

What I am looking for is a line that is very "managable," thin, low or no memory, highly abrassive resistant and has low visibility. One option I have considered is 10/2 or 20/6 braid. If you are fishing mostly for largemouth bass and your water is at least slightly stained, I think this might be a good option.

Personally, I do't like braid, so I don't use it. What I have found that meets most of my criteria is Yo-Zuri Hybrid Ultra Soft #6 (11.9 lb test), .010" diameter. In general, I would recommend a monofilament or copolymer no thicker than .012", or about 10 lb test.

[ww2farmer]

Any line over 10lb and I use casting gear. Also for me limp lines like Trilene XL are the best choice for spinning gear, stiffer more abrasion resistiant lines like XT handle better on baitcasting reels. If I use braid on spinning gear I also don't go over 10lb either. I only fish for LM, and these lines do the job for me. Some buddies of mine that chase SM like FC on spinning gear, but I don't bother with it, they one time I tried it (berkley vanish) it really dissapointed me, on both spinning and casting reels.

[MALTESE FALCON]

I DON'T GO OVER 10# ON MY SPINNING REELS. TYPICALLY WHEN I'M USING MY SPINNING GEAR I'M FINESSE FISHING. I LIKE TRILENE XL THE BEST.

[Bud]

Try some Sunline Defier on your spinning reel.  I ran out of Yo-Zuri and tryed some Sunline Defier in #13 on my Stradic 2500MGFA.   It is expensive but work great.   I am thinking about switching everything over to it Spinning and Baitcasting.

[justfishin]

Hey RoadWarrior,

        How is that Yo-Zuri Ultra Soft on 2000 Stadics ? I saw it in my local Mom & Pops and thought I would buy some and give it a whirl. Low stretch? Does it come in green,etc.

[roadwarrior]

It comes in green, has virtually no memory in use, is highly resistant to abrasion, lasts forever (literally) and I have never been broken off by a fish. I like it and I think you will, too.

[justfishin]

Thanks RoadWarrior, I think I will give it a whirl. I like the line I use but, I thought that I would try it simply because of the abrasion factor. The Susquehanna in PA and the Upper Potomac in MD have some killer rocks and ledges and eat line for breakfast. Now about that dropping your rod and reeling up buisiness...lol. When I feel that tick or mush, I cross their eyes, like, right now!!!,lol,sorry, I just couldn't help myself. We all do it different. Good fishin.