Jump to content

Recommended Posts

Posted

Loosen after every trip

  • Like 2
  • Super User
Posted

It depends on what the drag disc is made of.  If it's felt, you'll ruin it quickly if you don't store it loosened.  This is where the habit came from.  With those softer, rubbery plastic discs, they'll ruin over time if you don't loosen them, but they're pretty resilient.  With carbon fiber, they won't ruin if you never loosen the drag.  They're hard as a rock and you'll strip your bolt threads before you compress those.  

 

I switch all of my reels over to carbon fiber, if they don't come with it already, specifically for this reason.  Otherwise, I have a bad habit of missing my first fish because I forget to retighten it.  

  • Like 2
  • Super User
Posted

if i'm being honest, you put my feet to the fire and i couldnt tell you what material my drags are made of.  

 

as i get things serviced, i assume i will upgrade.  as of now, i dont stop for any winter, i fish almost weekly, i dont have any issues.  some reels sit for weeks unused.  like i dont punch fish thru the winter. 

  • Super User
Posted

Like @Bankc - if it's Oil-Felt or plastic, it gets loosened, Carbon-Fiber I just leave alone.

 

And I've been upgrading all my non-Carbon discs to Carbon.

20210304_204140.thumb.jpg.7e7661634998a410f66e5441c853c011.jpg

  • 1 year later...
Posted

I know this is an old thread but I just saw a youtube video last night where a guy was suggesting loosening your drags after every outing and definitely at the end of the season.

 

I'm starting to get into some high end gear so I guess I'll start doing this.

 

Knowing how my brain works (not well most of the time) I'm sure this will backfire on me.

 

LOL

  • Like 1
  • Super User
Posted

Last thing with a reel coming off my bench, drag gets set using a spring balance.  

Proper drag set is 1/4 of weakest link - line or leader breaking strength, or rod max line rating.  

It won't get touched again until the next bench trip.  

That way, I'm always fishing with a Known.  

vCBlGPC.jpg

  • Like 4
  • Global Moderator
Posted

I Always back off my drag after each outing. 

If I don’t intend to use that combo again for a while I’ll also cut the lure off before storing it away. 
It’s just my reminder to re rig the next time. 
 

 

 

 

 

Mike

 

  • Like 4
  • Super User
Posted

Never knew it was a thing until this thread.

Never had and probably to late to add something else to remember 😉 

  • Super User
Posted

Nope, I do not. I check em before first cast unless it’s my JDM Vanford, it uses felt drag washers so I back those off..

  • Like 2
Posted

I'd never loosed a drag in my life, but started doing it when I winterized my boat each year after reading somewhere that it was recommended.

  • Like 1
Posted

I always loosen mine after taking apart older reels and the drags were glued to the main gear and deteriorating 

  • Like 1
Posted

I’ve never heard of doing this. Here in Florida we don’t have an “off” season. We can fish year round. 
 

I’d be really interested to hear @Delaware Valley Tackletake on this since he repairs reels for a living. 
 

Personally I would expect modern reels not to need it, but I could be wrong. 
 

Does it make a difference if it’s casting or spinning reels?

  • Like 1
Posted
1 hour ago, woolleyfooley said:

I’ve never heard of doing this. Here in Florida we don’t have an “off” season. We can fish year round. 
 

I’d be really interested to hear @Delaware Valley Tackletake on this since he repairs reels for a living. 
 

Personally I would expect modern reels not to need it, but I could be wrong. 
 

Does it make a difference if it’s casting or spinning reels?

It sure won’t hurt anything, but I don’t see it as critical. If I made a top ten list of reel care tips loosening drag after every trip wouldn’t make the list. If you’re one to lock drags down, which I discourage but I know is done, and you store for long periods I’d back them off. Especially if you have a shimano with the non carbon washers. 

  • Like 6
Posted

I always back them off when putting them away after a trip, it's just a habit from fishing for over 60 years.

I tighten them up when loading them up for a trip, and check again when on the water

  • Like 1
  • Super User
Posted
1 hour ago, ike8120 said:

I only back them for the winter. Othwerwise I just leave them alone

 

 

Same

 

I do however, check mine before I make my first cast each outing.  Just to confirm.  Its a habit.

  • Like 3
  • Super User
Posted

Admittedly I'm a simpleton, but I'd never do this on a reel that wasn't going into some kind of deep storage........this sounds like a recipe for disaster. 

 

The last new reel I bought I spooled it up, fished it for an hour so, then had a monster eat a buzzbait and ended up dumping her because the drag never got set out of the box lol.    

 

That scene would repeat itself in short order if I started to mess with my drags off the water.   

 

For my reels at least, tightened drags is the least of their concerns 🤣

  • Like 4
Posted

Fervently loosen both drag and reel seat when I leave the river bank because I'm usually bushwacking from there.

Posted
2 hours ago, AlabamaSpothunter said:

Admittedly I'm a simpleton, but I'd never do this on a reel that wasn't going into some kind of deep storage........this sounds like a recipe for disaster. 

 

The last new reel I bought I spooled it up, fished it for an hour so, then had a monster eat a buzzbait and ended up dumping her because the drag never got set out of the box lol.    

 

That scene would repeat itself in short order if I started to mess with my drags off the water.   

 

For my reels at least, tightened drags is the least of their concerns 🤣

Happened with me too.  Really sucked.

  • Like 1
Posted
22 hours ago, Delaware Valley Tackle said:

It sure won’t hurt anything, but I don’t see it as critical. If I made a top ten list of reel care tips loosening drag after every trip wouldn’t make the list. If you’re one to lock drags down, which I discourage but I know is done, and you store for long periods I’d back them off. Especially if you have a shimano with the non carbon washers. 

Thanks! I assume most if not all modern reels use carbon drags, right? 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.



  • Outboard Engine

    fishing forum

    fishing tackle

    fishing

    fishing

    fishing

    bass fish

    fish for bass



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.