Jump to content

Recommended Posts

Posted

Used to bow fish back in the 70’s, repurposed the rod into a spooler of sorts, not perfect but it works for me.

 

 

IMG_2023-7-11-071654.jpeg

  • Like 2
  • Super User
Posted
18 hours ago, garroyo130 said:

Berkley spooling station works for me. image.thumb.png.67dfcc8e6bfb9f5769edc5ef414b5a22.png

 

Goes everywhere I go ?

Posted

I just got the KastKing Radius Line Spooler.  I have used it only once. Not sure how long it will last though. I like the tension bands though.

  • Super User
Posted

If it’s a 600 yard spool, use the old tennis shoe trick. Works like a charm and no line twist!! 

IMG_1271.jpeg

  • Super User
Posted
5 minutes ago, FryDog62 said:

If it’s a 600 yard spool, use the old tennis shoe trick. Works like a charm and no line twist!!

Does it also impart a scent attractive to bass? ;)

  • Haha 2
  • Super User
Posted

Pencil and a small cardboard box works for me.

  • Like 2
  • Super User
Posted
40 minutes ago, MN Fisher said:

Does it also impart a scent attractive to bass? ;)

Yes, the original source of Maxscent!

  • Haha 4
Posted

@MN Fisher, thank you Ken!

 

@gimruis, Just be sure and get an experienced associate to do your spooling! I can't tell you how many times some of our newer associates would spool a spinning reel backwards.

  • Like 2
  • Haha 1
  • Super User
Posted
15 minutes ago, volzfan59 said:

I can't tell you how many times some of our newer associates would spool a spinning reel backwards.

Ya that would be an issue.  I've been taking mine there for about 15 years now without an issue.  I'm pretty specific about which person does it though, and I tell them exactly how much line I want on each spool.

  • Like 1
Posted
19 hours ago, Mike L said:

Put the spool in a small box with a long screwdriver through the hole with the ends out. 

Get a cardboard box just wide enough to hold the spool so it’ll rotate freely. 
 

Exactly what I do. Works perfect 

22 hours ago, garroyo130 said:

Berkley spooling station works for me. image.thumb.png.67dfcc8e6bfb9f5769edc5ef414b5a22.png

How are you even able to put enough tension on that? I feel like the line would go on the spool loose

  • Like 1
  • Super User
Posted

@Justinfish It has rubber spring-loaded inserts that can be adjusted as loose or tight as you want. You can tighten it enough you can’t reel lol. 
 

I only use it for baitcasting reels. I don’t think it’s all that needed for spinning rigs. 

  • Super User
Posted

I'm a bit stunned reading this thread.   I never considered that having a spool flopping and rolling around the floor was somehow unsatisfactory. 

  • Haha 6
  • Super User
Posted
2 minutes ago, Choporoz said:

I'm a bit stunned reading this thread.   I never considered that having a spool flopping and rolling around the floor was somehow unsatisfactory. 

That’s exactly what I did before I bought the Plano box.  Doesn’t really matter because I walk all the fresh line off the spool and rewind it so there’s no loops. 

Posted

I have this one at home. It will hold what I use one my baitcasters. And I just use the floor for my spinning reels s-l300.jpg.4c410ebc5f0b0d1bf03b08d9720ddeb5.jpg

  • Like 1
Posted

Wish I knew how to post a picture of this.  I take a wooden bar stool and turn it upside down.  I then push an elastic hair band through the line spool.  Next I stretch that hair band between 2 legs of the stool, and position the line spool in the center.  Most of the time I leave the reel on the rod and leave enough of the backing hanging from the rod tip to tie to the new line and begin reeling.  All my reels are Daiwa T Wings so there is no problem with the knot passing onto the reel.

1 hour ago, Justinfish said:

Exactly what I do. Works perfect 

How are you even able to put enough tension on that? I feel like the line would go on the spool loose

I had that very spooling station for years.  I got tired of loose line wrapping itself around those springs.

Posted
21 hours ago, crypt said:

screwdriver mounted in a vise.

Pole barn nail mounted in a vise.

 

Tom

  • Like 1
Posted

Dowel with a cap on one end stuck into a hole on my shelf support.  Maintain tension with a wet rag covering my thumb and index finger.

  • Super User
Posted

Decades ago I was on a charter boat fishing for tuna and the deck hand put the spool of line in the bait tank wells to hold the wet spool. The water kept the spool with a little tension and wet the line at the same time. Simple trick and I have used a Live well with water since. At home I use a plastic bucket with a dowel in the water and use my fingers to apply a little line tension. The dowel keeps the narrow filler spool from flipping over.

Tom

  • Like 2
Posted
5 hours ago, gimruis said:

I'm pretty specific about which person does it though, and I tell them exactly how much line I want on each spool.

You sir, are a smart man. I had regulars too. Most would call to if/when I would be on duty. I'd love to own one of those machines.

  • Like 1
Posted

This is when it helps to keep all the little odds and ends so you can frankenstein something like this together. I don't even know what that spring thing is, but it works great for this. That's a rubber washer, there's also a felt washer and metal washer. The 4X4 is for weight - a stable base. It's got a rubber pad on the bottom. Lock nut on the end of the bolt. Pretty simple. Less static than a wife. ?

 

 

spooler.jpg

Posted
On 7/10/2023 at 12:17 PM, garroyo130 said:

Berkley spooling station works for me. image.thumb.png.67dfcc8e6bfb9f5769edc5ef414b5a22.png

This is what I use as well. Works great and lasts forever. 

  • Super User
Posted

Personally, I don’t like to take the reel off the rod to spool it.  I have busted reel seat retainers because most are plastic.  Plus I really wrench my reel seats tight.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.



  • Outboard Engine

    fishing forum

    fishing tackle

    fishing

    fishing

    fishing

    bass fish

    fish for bass



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.