Striper9 Posted June 8, 2023 Posted June 8, 2023 I fish mainly shallow very weedy ponds less than 6’ deep. Is it wise to just fish straight braid Vs mono or fluoro? I lost a good fish the other day due to leader failure when the fish buried me in grass 1 Quote
Super User T-Billy Posted June 8, 2023 Super User Posted June 8, 2023 Forget the leaders. #STRAIGHTBRAIDBRIGADE!!! It won't cost you bites and you won't have to worry about breaking off fish. 3 4 Quote
Super User J Francho Posted June 8, 2023 Super User Posted June 8, 2023 For this case, straight braid all the way. 1 Quote
JediAmoeba Posted June 8, 2023 Posted June 8, 2023 Unpressured and very weedy or tannic water - straight braid is the ticket. Just make sure your drag is set accordingly 1 Quote
r83srock Posted June 8, 2023 Posted June 8, 2023 Straight braid. I like 30lb for most casting applications. Quote
Super User PhishLI Posted June 8, 2023 Super User Posted June 8, 2023 2 hours ago, Striper9 said: I fish mainly shallow very weedy ponds less than 6’ deep. 30lb for the weeds and 50lb for the pads. No problem. Go straight 15lb Big Game mono for topwater treble baits where you can avoid getting ran into the pads, 1 Quote
Global Moderator Mike L Posted June 8, 2023 Global Moderator Posted June 8, 2023 Braid is a good answer, but in those conditions I opt for fluorocarbon first then go from there if warranted. I never use mono Mike Quote
Super User Bird Posted June 8, 2023 Super User Posted June 8, 2023 Heck I'm straight braid on everything moving, go for it. 1 Quote
CrashVector Posted June 10, 2023 Posted June 10, 2023 I never use leaders. Straight braid only. 2 Quote
softwateronly Posted June 10, 2023 Posted June 10, 2023 Straight braid is best, but if you have zebra mussels that cling to weeds en masse, it's been better for me to add a leader back in for the abrasion resistance. scott 2 Quote
Super User J Francho Posted June 10, 2023 Super User Posted June 10, 2023 19 minutes ago, softwateronly said: Straight braid is best, but if you have zebra mussels that cling to weeds en masse, it's been better for me to add a leader back in for the abrasion resistance. scott This is very true up here. Got a bunch of pros dealing with it on Cayuga this week. I was perplexed the first time I came across it. It doesn't sound like the OP has this issue, but a good tip. Took me a minute to figure out what was going on - during a TX on Cayuga no less lol. 1 Quote
softwateronly Posted June 10, 2023 Posted June 10, 2023 2 minutes ago, J Francho said: This is very true up here. Got a bunch of pros dealing with it on Cayuga this week. I was perplexed the first time I came across it. It doesn't sound like the OP has this issue, but a good tip. Took me a minute to figure out what was going on - during a TX on Cayuga no less lol. You feel nothing while fishing too, the only way to know is to feel your lines and visually inspect it frequently. It just has to become habit or heartbreak. scott 1 Quote
Super User Darth-Baiter Posted June 10, 2023 Super User Posted June 10, 2023 Can’t hurt to try it. Decide for yourself. 1 Quote
Kirtley Howe Posted June 10, 2023 Posted June 10, 2023 31 minutes ago, J Francho said: This is very true up here. Got a bunch of pros dealing with it on Cayuga this week. I was perplexed the first time I came across it. It doesn't sound like the OP has this issue, but a good tip. Took me a minute to figure out what was going on - during a TX on Cayuga no less lol. I discovered what happens to braid when it encounters zebra mussels on Cayuga also. I wasn't paying attention and lost a couple of fish due to the braid failing. I was completely perplexed at first. Quote
Super User dodgeguy Posted June 10, 2023 Super User Posted June 10, 2023 Straight braid is the way to go. Fish are not line shy. Smaller lines let lures act more natural. I've tried mono and fluorocarbon and on bad days I've never caught more fish than I did with braid.if you fish with mussels you have to check the braid. Thicker braid would be helpful. Quote
wdp Posted June 10, 2023 Posted June 10, 2023 Straight braid. I’ve never used leaders. Fluorocarbon leaders just overcomplicate things imo. I’m either using straight braid or straight fluoro 99% of time; hardly ever use mono anymore. I even use 10-15 lb straight braid for my open water finesse presentations like shakey heads or pseudo Ned rigs (you just gotta use a spinning rod with a soft tip). 2 Quote
Super User bowhunter63 Posted June 10, 2023 Super User Posted June 10, 2023 Straight braid. If I use it, It’s in the River Never seem to see a difference Quote
Super User gim Posted June 12, 2023 Super User Posted June 12, 2023 On 6/10/2023 at 9:37 AM, softwateronly said: Straight braid is best, but if you have zebra mussels that cling to weeds en masse, it's been better for me to add a leader back in for the abrasion resistance. scott A few lakes here have them and you cannot use straight braid on a bottom contact presentation amongst those sharp zebes. We also have toothy predators that’ll slice through braid quite easily as well. I don’t think the OP has either of these problems to deal with. Quote
BassResource.com Administrator Glenn Posted June 12, 2023 BassResource.com Administrator Posted June 12, 2023 When I'm using braid, it's straight braid. When I'm using Fluoro, it's straight fluoro. 3 Quote
Super User Koz Posted June 12, 2023 Super User Posted June 12, 2023 I love to fish braid on my baitcasters, usually 30lb - 40lb for most applications and 50lb-60lb for weedy conditions. For years I fished straight braid with good results. Stained water or clear water, it didn't matter. But since I moved to Georgia in both my home lake and the other lakes I fish I have not caught as much as I used to catch. So for the past month I have been fishing braid with an 8-12 foot flouro leader, wither 10lbs or 15lbs and my catch rate has gone up. My hypothesis is that because of the fishing pressure in these lakes that some fish might be line shy. In the past I never gave the line shy theory much credence, but anecdotal evidence this past month makes me think there might be something to it. Quote
Global Moderator TnRiver46 Posted June 13, 2023 Global Moderator Posted June 13, 2023 23 hours ago, Glenn said: When I'm using braid, it's straight braid. When I'm using Fluoro, it's straight fluoro. You mean you don’t like piddling around with knots and leaders all day??? the way I see it, all that retying is less time for fishing 4 hours ago, Koz said: I love to fish braid on my baitcasters, usually 30lb - 40lb for most applications and 50lb-60lb for weedy conditions. For years I fished straight braid with good results. Stained water or clear water, it didn't matter. But since I moved to Georgia in both my home lake and the other lakes I fish I have not caught as much as I used to catch. So for the past month I have been fishing braid with an 8-12 foot flouro leader, wither 10lbs or 15lbs and my catch rate has gone up. My hypothesis is that because of the fishing pressure in these lakes that some fish might be line shy. In the past I never gave the line shy theory much credence, but anecdotal evidence this past month makes me think there might be something to it. Some of it is the lakes I’m sure, weren’t your previous lagoons private? I’m thinking it’s more about clarity, although I’ve never seen oconee water. I know hartwell was clear when I went 3 Quote
MontclairDave Posted June 17, 2023 Posted June 17, 2023 On 6/10/2023 at 12:34 PM, wdp said: Straight braid. I’ve never used leaders. Fluorocarbon leaders just overcomplicate things imo. I’m either using straight braid or straight fluoro 99% of time; hardly ever use mono anymore. I even use 10-15 lb straight braid for my open water finesse presentations like shakey heads or pseudo Ned rigs (you just gotta use a spinning rod with a soft tip). This is more and more my approach. Used to use a LOT of braid-to-fluoro and after a few trips where I forgot my leader box and fished straight braid and straight fluoro I noticed no difference in catch rate regardless of what line I use. But I fish weedy ponds with pretty murky water like the OP. In Michigan or other clear water fisheries, I can see straight braid being a problem. Quote
Ryanralston07 Posted June 17, 2023 Posted June 17, 2023 I fish mostly low-pressured private lakes, so I run straight 40# braid on my baitcasting MH/F t-rig setup, but I run #10 Yozuri hybrid on my baitcasting light lure m/f setup that I throw topwater on, and the occasional wacky rigged worm. Those are the main two rods I carry with me. If I carry a third, it's a spinning rod with 15# braid. My braid of choice is Powerpro in Green Moss and it's pretty hard to see in the grassy water where I fish. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.