MDB730 Posted July 15, 2022 Posted July 15, 2022 Hi I'm new to baitcasting/ freshwater fishing, have been going out 3 times a week to my local creek learning with cheap mono line how to use them. I'm finally feeling comfortable with a baitcaster and now i'm looking to change the cheap lines on my reels. I have 3 rods I use, 1 spinning rod 7" ft MH, and two 7"ft MH baitcasters (teaching myself) one Abu Garcia vengeance 6.4:1 and one Kastking Crixus 6:5:1. I came across a local sale where they were selling Fins windtamer #50,#30,#20 and #12 150 yards for 5 bucks and purchased 1 of each. I'm thinking of using #50 on the 6:5:1 reel as a frogging/T-rig/C-rig and #20 or #30 with a leader for cranks, topwater and #12 for the spinning rod to use for trout or finesse fishing. I'm open to suggestions as my experience is limited to fishing from a bulk carrier at anchor with a 12 ft surf rod lined with 30lb mono. Quote
cchapraps Posted July 15, 2022 Posted July 15, 2022 I’m sure some peoples opinions will differ but I would definitely use the 12# for the spinning with a light leader. you could probably run straight braid 50# for what you said (frogs, t-rigs, other power fishing techniques). I would say 30# with a leader would be most versatile on the second baitcasting rod, but it depends on what cover you’re fishing around and such. good luck with everything! it looks like you have a good idea of what you’re doing. Quote
MDB730 Posted July 15, 2022 Author Posted July 15, 2022 21 minutes ago, cchapraps said: I’m sure some peoples opinions will differ but I would definitely use the 12# for the spinning with a light leader. you could probably run straight braid 50# for what you said (frogs, t-rigs, other power fishing techniques). I would say 30# with a leader would be most versatile on the second baitcasting rod, but it depends on what cover you’re fishing around and such. good luck with everything! it looks like you have a good idea of what you’re doing. Thanks, appreciate the feedback Quote
Super User Boomstick Posted July 15, 2022 Super User Posted July 15, 2022 There's an endless number of options. I would probably try to use 20# or 30# braid on the spinning rod (being a medium heavy) because braid handles better on spinning gear. And I would use 12# mono on one of the casting reels and either 15# mono or 40# braid on the other. 40# braid is adequate for light duty frogging - which is all I would expect on a MH rod anyway. I would advise to sticking to mono over fluorocarbon for now because it floats and it's cheaper and you're just starting out. Berkley Big Game is fine if you are on a budget, and if you want something a little better handling Sufix Siege is great. Quote
MDB730 Posted July 18, 2022 Author Posted July 18, 2022 Thank you all for your suggestions, I decided to hold off on putting new line on the rods and kept the cheap mono on while I experiment with different casting techniques. I'm now at pro at picking out backlashes but i'm also now getting less of them. 1 Quote
Super User dodgeguy Posted July 18, 2022 Super User Posted July 18, 2022 Use30lb with no leaders and a Norman speed clip for cranks. Leaders are just extra knots. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.