THE_Vue's Posted October 18, 2020 Posted October 18, 2020 What has your experience been like with guide replacement? Do they normally replace the guides or exchange rod? Got a Imx Pro 845c crank rod, the 3rd double foot guide started to groove and fray my line. Lost couple fishes and lure because of it already. Forsure I will call them too but just wanted to get people with 1st hand experience. THanks Quote
Super User roadwarrior Posted October 18, 2020 Super User Posted October 18, 2020 You have an issue I have never heard of regarding modern guides. I will be very interested in what G.Loomis has to say. Sounds to me like the insert is broken or has fallen out. Quote
THE_Vue's Posted October 18, 2020 Author Posted October 18, 2020 The insert is still intact with the frame I never heard of the alconite groove either, which are on the IMX Pro. I've heard of the recoil or cheaper guides groove but never the Sic or alconites. Its also weird how its on the double footed guides as opposed to the more common rod tip guide. Good thing my season is over, nonetheless I'll hear from Loomis tomorrow I'll try to get a picture for future reference if anyone is on a search for a groove alconite guide. Somebody correct me if I'm wrong about the Imx guides tho Quote
Super User S Hovanec Posted October 19, 2020 Super User Posted October 19, 2020 The color of the ring looks more like a Fazlite. All the alconites I've worked with were pitch black. 1 Quote
Super User S Hovanec Posted October 19, 2020 Super User Posted October 19, 2020 And actually, from that angle, it doesn't look like a grooved guide, it looks like excess epoxy on the ring that the line cut into. 1 Quote
Super User FishTank Posted October 19, 2020 Super User Posted October 19, 2020 Just curious. What kind of line is being used? Quote
THE_Vue's Posted October 19, 2020 Author Posted October 19, 2020 3 hours ago, FishTank said: Just curious. What kind of line is being used? 10 to 12lbs sniper Quote
THE_Vue's Posted October 19, 2020 Author Posted October 19, 2020 Called them and confirmed these are alconite guide along with my other concerns Quote
Super User FishTank Posted October 19, 2020 Super User Posted October 19, 2020 5 hours ago, THE_Vue's said: Called them and confirmed these are alconite guide along with my other concerns Sniper shouldn't cause the guides to wear like that unless you are really putting some high stress on the rod. Have you tried running a cotton swab through the guides? If it teares the cotton, then something funky may be going on. I would also clean the guides with alcohol, same swab. You can also run a cotton swab lightly wet with reel oil to smooth them out. Otherwise hopefully Loomis can work with you on it. Quote
Super User S Hovanec Posted October 19, 2020 Super User Posted October 19, 2020 I'm sticking with my theory if wayward epoxy from coating the wraps. Quote
THE_Vue's Posted October 19, 2020 Author Posted October 19, 2020 17 minutes ago, FishTank said: Sniper shouldn't cause the guides to were like that unless you are really putting some high stress on the rod. Have you tried running a cotton swab through the guides? If it teares the cotton, then something funky may be going on. I would also clean the guides with alcohol, same swab. You can also run a cotton swab lightly wet with reel oil to smooth them out. Otherwise hopefully Loomis can work with you on it. Thats how i found the groove with the q tip trick. Quote
THE_Vue's Posted October 19, 2020 Author Posted October 19, 2020 36 minutes ago, S Hovanec said: I'm sticking with my theory if wayward epoxy from coating the wraps. You are right dude. d**n I wish I could beer right now. LOL 1 Quote
Super User S Hovanec Posted October 19, 2020 Super User Posted October 19, 2020 34 minutes ago, THE_Vue's said: You are right dude. d**n I wish I could beer right now. LOL I would hate to see you send it back for a simple fix like that. Quote
Super User MickD Posted October 19, 2020 Super User Posted October 19, 2020 Grooving will not cause line failure. It is smooth. A crack in the ring will. Does it pass the Q-tip test? Also, this may not even be your problem. Does the tiptop pass the Q-tip test? Quote
Super User FishTank Posted October 19, 2020 Super User Posted October 19, 2020 2 hours ago, THE_Vue's said: You are right dude. d**n I wish I could beer right now. LOL If it is epoxy, vinegar should take it off but be careful not to get it any place else and don't let it soak into the guide ring. Just a drop on a q-tip again. Quote
Super User S Hovanec Posted October 20, 2020 Super User Posted October 20, 2020 Vinegar or any solvent won't do anything to that epoxy. Just take an x-acto knife or similar and scrape it out Quote
Super User FishTank Posted October 20, 2020 Super User Posted October 20, 2020 31 minutes ago, S Hovanec said: Vinegar or any solvent won't do anything to that epoxy. Just take an x-acto knife or similar and scrape it out I have worked in printing for years and we use epoxy for various applications. To remove it, we use vinegar on delicate surfaces, hands, etc. Once it is hardened, heat maybe and goo gone or vinegar. There are other methods..... https://www.bobvila.com/articles/how-to-remove-epoxy/ Quote
Super User S Hovanec Posted October 20, 2020 Super User Posted October 20, 2020 Once cured, nothing I've ever seen will dissolve the thread finish. Heat may soften it, depending on the brand. It's more of a casting resin than an adhesive, Soo it won't stick really well to the ceramic. It'll just pop off if you hit it with a knife. Quote
THE_Vue's Posted October 20, 2020 Author Posted October 20, 2020 Took a hook and got the rest out. Good call on the epoxy S hovanec 1 Quote
Ogandrews Posted October 20, 2020 Posted October 20, 2020 Going to somewhat hijack this thread. This weekend I snapped the handle of my imx pro 892c while casting a 1/4 oz jig. Never had it happen before, but the blank and most of the cork just snapped in half when I was doing a hard cast like I usually do. This seems like it has to be a factory defect as the rods only a couple months old. Anyone have experience with loomis warranteeing stuff like this? Quote
Super User roadwarrior Posted October 20, 2020 Super User Posted October 20, 2020 If it is determined to be defective, G. Loomis will replace the rod. Otherwise: https://www.gloomis.com/content/dam/shimanosnaffish/pdf/expCon1.pdf Quote
waymont Posted October 20, 2020 Posted October 20, 2020 9 hours ago, Ogandrews said: Going to somewhat hijack this thread. This weekend I snapped the handle of my imx pro 892c while casting a 1/4 oz jig. Never had it happen before, but the blank and most of the cork just snapped in half when I was doing a hard cast like I usually do. This seems like it has to be a factory defect as the rods only a couple months old. Anyone have experience with loomis warranteeing stuff like this? I had a 12 year old rod Fuji reel seat break, and they replaced the rod free. Quote
mc6524 Posted October 20, 2020 Posted October 20, 2020 I’ve recently had guide issues with an NRX and IMX rods. The insert came out and I had to expoxy the insert back-in. I had to have a guide replaced on another NRX rod because one of the guide foots came out of the thread wrap. Instead of sending it in and having to wait for a Loomis repair, I had the guide repaired locally. Quote
Super User S Hovanec Posted October 20, 2020 Super User Posted October 20, 2020 11 minutes ago, mc6524 said: Instead of sending it in and having to wait for a Loomis repair, I had the guide repaired locally. For the $$ spent on shipping it back, a local guy can do it much cheaper. I've repaired many NRXs. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.