t_bone_713 Posted May 30, 2020 Posted May 30, 2020 Good Evening Fishing Friends, I was curious if any truck owners have full bedcaps on their trucks and their rods are longer than bed length with tailgate down. Meaning the rod tip hangs over the edge of the tailgate. Further, they can't lay them rods in the bed with the tailgate up because the bedcap would impede. All my rods are one piece obviously. What solutions could I employ that have worked for you or think would work? The only solution I came up with without purchasing anything more would be to create a bungee web to snap my reels into the web to hold them in place and have the tips stick out a little over the end of the tailgate. I'm not 100% sold on the bedcap yet but if I do install it I'm not against spending a little money to create something for my rods on bank fishing trips. Thanks, T Quote
Super User jimmyjoe Posted May 30, 2020 Super User Posted May 30, 2020 Measure the inside diagonal of your truck bed. Rods don't need to lay in there straight. Make a cushion box out of Styrofoam, shaped to the diagonal. A six foot bed that is 4 feet wide has a diagonal of 7 feet, 2and a half inches. Longer bed, longer diagonal. jj 1 Quote
t_bone_713 Posted May 30, 2020 Author Posted May 30, 2020 Noted, I will measure it. Here's to the Mighty Mississippi. 1 Quote
Super User Scott F Posted May 30, 2020 Super User Posted May 30, 2020 I specifically bought a truck with the 6.5 foot bed so my 7’ rods will fit inside hanging from a rod rack inside the cap. It’s a little hard to see, black carpet lining the cap and a black bed rug. 2 1 Quote
t_bone_713 Posted May 30, 2020 Author Posted May 30, 2020 3 minutes ago, Scott F said: I specifically bought a truck with the 6.5 foot bed so my 7’ rods will fit inside hanging from a rod rack inside the cap. It’s a little hard to see, black carpet lining the cap and a black bed rug. Where did you get those rod racks? I could get some use out of those not only in this scenario but in my shed. Quote
Super User Scott F Posted May 30, 2020 Super User Posted May 30, 2020 10 minutes ago, t_bone_713 said: Where did you get those rod racks? I could get some use out of those not only in this scenario but in my shed. Bass Pro sells them. Look up Twist Lock Rod Rack 1 Quote
t_bone_713 Posted May 30, 2020 Author Posted May 30, 2020 1 minute ago, Scott F said: Bass Pro sells them. Look up Twist Lock Rod Rack Many thanks my friend. Quote
Super User jimmyjoe Posted May 30, 2020 Super User Posted May 30, 2020 41 minutes ago, t_bone_713 said: Here's to the Mighty Mississippi. Went today, but only 45 minutes, above Lock and Dam 19. Caught a 20" walleye, but no bass. Ol' Man River is always changing, and always interesting. jj 1 Quote
K1500 Posted May 30, 2020 Posted May 30, 2020 Diagonal on a 6.5’ bed should fit a 7.5’ rod no problem. If you have one of the teeny super short bed 1/2 tons, get a rack on the camper and U-bolt on rod tubes on the rack. You can fit a fully strung fly rod in one. 1 Quote
schplurg Posted May 31, 2020 Posted May 31, 2020 Hanging the rods out the back - you better make sure that door can't slam shut and snap them 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.