Jump to content

Recommended Posts

Posted

I was thinking of upgrading my toad reel I'm considering the  kastking speed demon or Dawia Fuego CT,what would you do?It's only $20 difference between the two.Thanks guys!

Posted

Just get a dawia fuego - I wouldn't trust anything from kastking :)

 

 

  • Like 2
  • Global Moderator
Posted

I have 2 regular speed demons, 1 for frogs, 1 for buzzbaits. No complaints about either of them. I haven't used a Fuego but I'm sure they would work fine as well. The Speed Demon is a much larger bodied reel (think greenie Curado sized), so if that's an issue for you, then I wouldn't suggest it. 

Posted

Thanks guys!!! I've heard so much about kastking think I'm gonna give it a shot and decide for myself what I think of it,if I don't like it I'll send it back.

  • Like 1
Posted
57 minutes ago, KastKingUSA said:

Check out our new Royale Legend Elite reels as well. Cheaper than the Speed Demon Pro and the red option comes in an 8.1:1 gear ratio.

I went ahead and ordered the speed demon should have it tomorrow,gonna try it out Friday morning

  • Like 1
  • Super User
Posted

Lots IPT, and a powerful drag are what you want for toads.  Looks like you made a good choice in the Speed Demon.

  • Like 1
  • Thanks 1
Posted
2 hours ago, J Francho said:

Lots IPT, and a powerful drag are what you want for toads.  Looks like you made a good choice in the Speed Demon.

I'm looking forward to trying it out , IAM pairing it up with my Dobyns fury,I was using  a Lew's carbon blue speed stick combo as my toad rod n reel,than I tried my bass pro shop pro qualifier 2 6.8.1 with Dobyns fury just wasn't  fast enough to work the bait  properly or pull them out of the vegation fast enough,so I'm  sure the speed demon and Dobyns will be noticeable difference.

  • Like 2
  • Super User
Posted

I agree on the speed, tied a YUM Tip-Toad on my heavy (JWR 804) jig rod to try it out, since it was my only braided set up, and the 6.3:1 TD-X was a little tiring to use.  The bait was awesome, though.

  • Like 1
Posted
7 hours ago, J Francho said:

I agree on the speed, tied a YUM Tip-Toad on my heavy (JWR 804) jig rod to try it out, since it was my only braided set up, and the 6.3:1 TD-X was a little tiring to use.  The bait was awesome, though.

I was using 6.8.1 and 7.1.1 so I'm looking forward to 9.3.1.That yum tip toad looks awesome

  • Like 1
  • Super User
Posted
41 minutes ago, Wurming67 said:

That yum tip toad looks awesome

Yuuuup!.

IMG_1232-X2.jpg

  • Like 1
Posted

I had a BPS Pro Qualifier on my frog rod for three years with 50lb braid and it worked great.  surprisingly husky little reel and I got in on sale for $80  Never a problem with it..

Posted
3 hours ago, OnthePotomac said:

I had a BPS Pro Qualifier on my frog rod for three years with 50lb braid and it worked great.  surprisingly husky little reel and I got in on sale for $80  Never a problem with it..

The problem I had with was I need a higher gear ratio than 6.8.1 to pull them out of the south Florida slop so they wouldn't get all wrapped up in it,I lost a really nice fish this past weekend in the Lily pads I couldn't get the line up fast enough to get him from wrapping up in the pads and he came off the hook, that's why i decided to to get a reel with a higher gear ratio to avoid that in the future and wanted to try kastking to see what all the talk was about.If I like it I'll keep it if not try something else I'm not rich by any means and i do work very hard for my money but we are only talking about $70, My wife cost me $90 last weekend for dinner and drinks so I guess that kinda puts things in prespective,but I won't spend no more than $100 on a rod or reel.

 

 

PS I had a bps pro qualifier before and like it alot better than bps pro qualifier 2.

3 hours ago, J Francho said:

Yuuuup!.

IMG_1232-X2.jpg

Awesome!!!!

3 hours ago, J Francho said:

Yuuuup!.

IMG_1232-X2.jpg

I'm going kayak fishing this weekend in Punta Gorda Florida for snook and redfish pretty stoked about that looks like alot of fun.

  • Like 1
Posted

Well I took the speed demon out today and I caught quite a few fish on it,what I like about it was it casted great,smooth,fast.BUT what I didn't like about it was the drag system it says it's 13lb drag system and I was catching 2-3 lb fish on it and was having hard time reeling it in.Improve on drag system and you got a nice reel 

Posted
18 minutes ago, Wurming67 said:

Well I took the speed demon out today and I caught quite a few fish on it,what I like about it was it casted great,smooth,fast.BUT what I didn't like about it was the drag system it says it's 13lb drag system and I was catching 2-3 lb fish on it and was having hard time reeling it in.Improve on drag system and you got a nice reel 

How did you attach your braid to the spool? If you don't use backing mono or some tape the braid will slip on the spool, making it feel like the drag is weak.

Posted
18 minutes ago, Tim Kelly said:

How did you attach your braid to the spool? If you don't use backing mono or some tape the braid will slip on the spool, making it feel like the drag is weak.

I put tape on it,maybe I'll try mono backing, thanks!

  • Super User
Posted

I don’t trust the tape. Always use a at least 20 turns of mono. 

Posted
11 minutes ago, J Francho said:

I don’t trust the tape. Always use a at least 20 turns of mono. 

I'm gonna try that cause I really like the reel.Thanks!

  • Like 1
  • Super User
Posted

And if that still doesn’t work, contact them. They’ll get you one that’s right. 

  • Thanks 1
  • Global Moderator
Posted

They had an issue for awhile with the drag washers not being placed in the reel correctly. 

 

They were in the reel like this when I took them apart.

No automatic alt text available.

 

When they needed to look like this.

No automatic alt text available.

 

That helped my drags out a lot on both of mine. 

Posted
39 minutes ago, Bluebasser86 said:

They had an issue for awhile with the drag washers not being placed in the reel correctly. 

 

They were in the reel like this when I took them apart.

No automatic alt text available.

 

When they needed to look like this.

No automatic alt text available.

 

That helped my drags out a lot on both of mine. 

It tripped me out I'm cranking my reel and it's not gathering line,I'm gonna try what JFranco said and put mono backing I think I put the braid on wrong I put a piece of tape on spool than put braid on it could be the line slipping so it might not be reel it might be the way I put the braid.

Posted

Went out fishing today caught alot on the speed demon,put mono backing than braid, problem solved,no issues at all.Thanks guys!!

  • Like 2
  • Super User
Posted

I also think it's the tape.  As for the backing of mono, if you wish to max on the braid, you will only need about 30' of mono to prevent the braid from slipping.  Please report back as to your findings. Thanks.

  • Like 1
Posted
37 minutes ago, islandbass said:

I also think it's the tape.  As for the backing of mono, if you wish to max on the braid, you will only need about 30' of mono to prevent the braid from slipping.  Please report back as to your findings. Thanks.

I put mono backing on it,no more problems with drag slipping

  • Like 1
  • Super User
Posted

Excellent. I had a similar experience when I first tried braid.  Had zero knowledge about braid slipping.  I thought I must have somehow broke the drag on my curado, and that was like over 10 years ago, lol. 

 

I’m seriously considering getting a KK casting reel and possibly a spinning reel too.

 

Many of my reels are pushing 10 years in age or a little but they all work well. 

 

Casting 

Abu g round reel similar to a C4 or C4 with 2 brake shoes. 

201sf (older greenie) 

curado d 101 and 201

trion by (1st gen - that beige colored old.)

cardiff 301a 

 

spinning

2500 symetre (syme-what, lol)

20 sized rapala 6sxi

30 sized rapala 4sxi

abu g cardinal, the one that weighs 6.95 oz

 

a humble but functional arsenal

Posted
32 minutes ago, islandbass said:

Excellent. I had a similar experience when I first tried braid.  Had zero knowledge about braid slipping.  I thought I must have somehow broke the drag on my curado, and that was like over 10 years ago, lol. 

 

I’m seriously considering getting a KK casting reel and possibly a spinning reel too.

 

Many of my reels are pushing 10 years in age or a little but they all work well. 

 

Casting 

Abu g round reel similar to a C4 or C4 with 2 brake shoes. 

201sf (older greenie) 

curado d 101 and 201

trion by (1st gen - that beige colored old.)

cardiff 301a 

 

spinning

2500 symetre (syme-what, lol)

20 sized rapala 6sxi

30 sized rapala 4sxi

abu g cardinal, the one that weighs 6.95 oz

 

a humble but functional arsenal

Sounds like a nice setup!I been on a major topwater addiction lately so that speed demon is coming in handy and with such a high gear ratio you don't have to work so hard to get the bait moving,it's a nice reel for the money is it better than my daiwa tatula CT's ,no,but I needed a higher speed reel and wanted to try kastking,no regrets,would I buy another one?Maybe we will see how much she can handle ?

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.


  • Outboard Engine

    Fishing lures

    fishing forum

    fishing forum

    fishing tackle

    fishing

    fishing

    fishing

    bass fish

    fish for bass



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.