dryfly41 Posted July 9, 2007 Posted July 9, 2007 I'm replacing a 12/24 volt Motorguide (48 lb thrust) with a new MG W75 wireless. I want to remove the old plug and use it on the new motor so I can plug into the same outlet in the bow without having to change anything. The old plug is a four prong, three wire type and the new motor has only 2 wires. Is this is simple as it appears or am I neglecting something. Quote
George Welcome Posted July 9, 2007 Posted July 9, 2007 Simple - determine postive/negative in the outlet and match those poles on the plug. Present outlet configuration is a positive 12 volt, and positive 24 volt, and a ground. Remember to use the 24 volt positive. Quote
Super User Jig Man Posted July 9, 2007 Super User Posted July 9, 2007 If you have a $10 multi tester, you can determine which is which very easily. If you get the wrong one then you will be trying to run a 24v unit with 12v. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.