Redseal Posted December 4, 2017 Posted December 4, 2017 My trolling motor transducer wire smashed and cut in rough water , and I lost pic on my screen. Assumed I needed to replace the transducer . I purchased a xtm 9 di 25 t transducer. After install I get a decent sonar pic but di pic barely shows a bottom contour even after sensativety is turn all the way up. ? I've gone thru the set up menu several times . Do I have a set up issue or issue with the head unit. Help please My unit is a helix 9 chirp di GPS g2n Quote
Turtle135 Posted December 4, 2017 Posted December 4, 2017 1. Did you try resetting the unit to the factory defaults? I do that when my Helix gets out of wack just to get everything back to standard, then I tweek from there. 2. Have you confirmed that the "xtm 9 di 25 t" is a compatible transducer? This suggests the "XNT 9 DI T". https://www.humminbird.com/Products/HELIX-9-CHIRP-DI-GPS-G2N/ Quote
Redseal Posted December 5, 2017 Author Posted December 5, 2017 Humminbird says it is compatible. The XNT 9 DI T is the transducer supplied with the unit. It's a transom mount and it's the one I was using. I had issues with interference , so that's why I went to the xtm 9 di 25 t which is a trolling motor transducer. I did reset to factory defaults as part of the install Quote
Turtle135 Posted December 5, 2017 Posted December 5, 2017 (edited) I also saw this but if Humminbird Support says the XTM 9 DI 25 T is compatible it must be something else going on. Edited December 5, 2017 by Turtle135 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.