freelancer27 Posted September 18, 2017 Posted September 18, 2017 Hi all, I am looking for some recommendations on cleaning/ lubrication material. I am new to completely disassembling my reels and cleaning them. I am wondering if you could help me understand what you are using to get the job done. Since I have different brand reels (Shimano, Daiwa, Abu, Lew's) I am wondering you guys can recommend lube, grease, etc. that works for all reels? Thanks a lot! Cheers! Quote
finatic Posted September 18, 2017 Posted September 18, 2017 I just bought some Eagle Claw reel oil. There are all kinds of brands, but I don't think it really matters. I just put a couple drops under the bail and was good to go. If I was going to get into the gears I would use reel grease. Quote
Super User Oregon Native Posted September 18, 2017 Super User Posted September 18, 2017 Have mostly Shimano's myself and have stuck with shimano grease and oil. Reels have done well for years. No complaint's. 1 Quote
Bassfishin91 Posted September 18, 2017 Posted September 18, 2017 Both my baitcasters and spinning real are abu garcia's and before i had a few Quantums and all ive used is abu garcia grease and oil. Quote
BuzzHudson19c Posted September 18, 2017 Posted September 18, 2017 Hoppe's #9 and Snap on synthetic lubricant. 1 Quote
tholmes Posted September 18, 2017 Posted September 18, 2017 External cleaning - Simple Green followed by a coat of car wax. Internal cleaning - Simple Green, acetone or naphtha for soaking bearings. An old toothbrush for scrubbing stubborn gunk. Oil - Any good quality light oil will work. I use Tri-Flow or turbine oil. Rem Oil works well, also. Grease - Abu reel grease or Yamaha blue marine grease on gears and sliding metal parts and Cal's on the drag washers. Tom Quote
rosshilk Posted September 19, 2017 Posted September 19, 2017 I clean most of the reel with a toothbrush, water, and dish soap The best cleaner in my opinion for bearings would be simple green. I place the bearings in the solution while I do everything else Oil- tsi321 by far for worm gear and bearings Grease- Cals Reel Grease for the gears Quote
Kevinator1 Posted September 19, 2017 Posted September 19, 2017 Super Glue on gears, Loctite Red on bearings and JB Weld on the worm gear. Can't figure out why i can only cast 6 inches. 1 2 Quote
RB 77 Posted September 21, 2017 Posted September 21, 2017 Oil - Shimano oil. Grease - Cal's grease is the best! Quote
j_blaze14 Posted September 23, 2017 Posted September 23, 2017 wd40 to clean the grease, dawn to clean the wd40, coat all internals with brake free clp. ss bearings acetone, air compressor then 3in1. ceramics, acetone then air compressor. exterior, wd40. all can be found at walmart, brake free clp in gun cleaning section, next to remoil. baby wipes and wd40 on reel and rod handles too. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.