Loose Plano Box DIviders

[Puggz]

How do you affix your dividers in your plano stowaways?

I try to cut them apart with a bit of flashing left on it for a snug fit but sometimes they just break off clean and then they don't fit tight.

Not sure if a super glue would work on that material either.

Thoughts?
 

[A-Jay]

I slice them clean at the edge with a razor edge.

Haven't had a problem with them fitting poorly.

Seem OK to me but I guess you could glue them.

Might hamper any future box divider adjustment.

A-Jay

[Mike L]

Super glue works fine. 

Just make sure you put them where you want them the first time. 

 

 

 

 

 

Mike

[Hot Rod Johnson]

Try using a small dab of Silicone or Hot Melt Glue in one or both of the bottom corners. That way you can still remove them without too much effort or damage.

[CTBassin860]

I only use them on my terminal tackle box and jig box really.I put one on each bottom corners of the other bait boxes and I use the Flambeau Zerust dividers.They just limit your storage space if you ask me.

[camman]

You can use Loctite...it makes them semi-permanent

[fishwizzard]

I second the vote for a small tube of silicone caulk. A dot in each corner should hold pretty well, or you could squeeze a small amount to the track if you really want it locked in there.   Either one would still be removable if you wanted to later.