CrustyMono Posted December 3, 2016 Posted December 3, 2016 Has anyone built a rod tube out of PVC? looking to store 4-6 rods on an fj cruiser. Quote
Super User fishnkamp Posted December 3, 2016 Super User Posted December 3, 2016 Years ago I built one out of a large size pvc ( like 4 or 5 inch diameter) lighter weight pvc (not schedule 80). I installed a pvc pipe cap on one end. I installed one of the threaded caps that a plug screws in. Quote
Fisher-O-men Posted December 3, 2016 Posted December 3, 2016 If you are like most of us, you have several cardboard mailer tubes in the rafters. I know I will need them some day! Quote
Oklahoma Mike Posted December 3, 2016 Posted December 3, 2016 Yes, just cut to the desired length. On one end glue on a cap. On the other end glue on a female threaded connector, then install a screw in plug after you insert the rod. If I were going to mount that on a vehicle I would want to be able to secure that as well, so I'd probably try to come up with some type of hasp or bolt type lock at the threaded plug. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.