dachtor Posted February 22, 2006 Posted February 22, 2006 Looking at building a deck for my Jon Boat. Where can I find "marine plywood" or whatever wood is recomended for this type of construction? Thanks, Jeff Quote
jagdbdg Posted February 22, 2006 Posted February 22, 2006 Ihave never seen it at lowe, home depot but i looked on the internet and its about 110.00 for a 1/2 inch sheet, 140.00 a sheet for 5/8 sheets are 4x8 Quote
robe0531 Posted February 22, 2006 Posted February 22, 2006 you can use regualr plywood what i did was use regular plywood then i put topson water seal on it then i coated it wirh fiber glass resign and it is holding up real good had same wood on there for 2 years now and no problem cut and drill all your holes first though Quote
JayDub Posted February 23, 2006 Posted February 23, 2006 CDX plywood coated with a couple coats of fiberglass resin, as robe said, would work just fine... keeps all the water out. It is also ALOT cheaper. Quote
Travlin_Man Posted February 23, 2006 Posted February 23, 2006 Check out a local independent lumber yard. Ask them about AC, or BC plywood, this is a lot stronger , lighter and will lie flatter than CDX. A little more expensive, yes but not near as pricey as marine grade. A cabinet makers supply house is another good source. Good luck with your project. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.