Jump to content

Recommended Posts

Posted

Has anyone had any problems with there humminbird units randomly shutting off? My 999 that's at the console would do it riding down the lake so I thought it was just from rough water because it would happen in those situations but now it never wants to actually stay on and now my helix that's mounted up front is doing the same exact thing and I'm not sure if it's a issue with my boat or the electronics...idk if it matters or not but the boat is a 2003 ranger 185svs just so you guys know. And my helix literally just started doing it this weekend but before it was only the 999 

  • Super User
Posted

Chances are it's probably not the units themselves.

Sounds like a wiring deal.   Although it's usually challenging, tracing your electronics electrical system from beginning to the end may be called for.   By checking that power & grounding connections are tight & secure, inspecting wire integrity looking for bad crimps, chaffing, or frayed areas,  as well as fuse box connections along the way, could hopefully reveal your problem.

A-Jay

  • Like 1
Posted
3 minutes ago, A-Jay said:

Chances are it's probably not the units themselves.

Sounds like a wiring deal.   Although it's usually challenging, tracing your electronics electrical system from beginning to the end may be called for.   By checking that power & grounding connections are tight & secure, inspecting wire integrity looking for bad crimps, chaffing, or frayed areas,  as well as fuse box connections along the way, could hopefully reveal your problem.

A-Jay

Ya I was thinking that was it but all my wires to my console unit are good I didn't go through the front yet because I travel for work and had to leave but everything from the console back is good tight and no frays. I just wanted to get a plan of attack for what I need to do when I get back home and was wanting to bounce ideas of people. Have you ever had an issue like this? 

  • Super User
Posted
Just now, dougie511 said:

Ya I was thinking that was it but all my wires to my console unit are good I didn't go through the front yet because I travel for work and had to leave but everything from the console back is good tight and no frays. I just wanted to get a plan of attack for what I need to do when I get back home and was wanting to bounce ideas of people. Have you ever had an issue like this? 

For the record, Yes - I've had a few electrical challenges in my day. 

What you have described is intermittent power to your electronics (going on & off).  Your Biggest Problem is Accessibility.  You need to be able to get at ALL the Wiring & All the Connections and check them - ALL of them. 

Because something is compromised, some how.  Either it's loose, or frayed, or pinched, or grounded, or not grounded or maybe even burned.

Once you have physically looked over then entire deal, you'll most liking find where & what is causing the sporadic power loss to the units and resolving it will be the easy part.  Look closely too, it may not be super obvious at first.

A-Jay

 

 

  • Like 2
Posted
4 hours ago, A-Jay said:

For the record, Yes - I've had a few electrical challenges in my day. 

What you have described is intermittent power to your electronics (going on & off).  Your Biggest Problem is Accessibility.  You need to be able to get at ALL the Wiring & All the Connections and check them - ALL of them. 

Because something is compromised, some how.  Either it's loose, or frayed, or pinched, or grounded, or not grounded or maybe even burned.

Once you have physically looked over then entire deal, you'll most liking find where & what is causing the sporadic power loss to the units and resolving it will be the easy part.  Look closely too, it may not be super obvious at first.

A-Jay

 

 

Will do man! This is gonna be a bunch of fun I'm sure hahaha thanks for the help! 

  • Like 1
Posted
3 hours ago, Wayne P. said:

Did you extend the unit's power cords directly to the battery, not using the boat's wiring harness?

 

I ran a inline fuse to the battery for the console unit yes! The front is wired to a acc switch 

  • Super User
Posted
40 minutes ago, dougie511 said:

I ran a inline fuse to the battery for the console unit yes! The front is wired to a acc switch 

Both units should be wired directly to the battery and extended with at least 14 gauge wire. Use the spade type fuse/holder. I use 12 gauge to the bow.

An alternative is to install a dedicated sonar unit fuse panel at the console supplied with 10 gauge wire. Connect each sonar unit to that panel with the correct fuse size for each. Extend the bow power cord with 14 gauge wire.

Modern sonar units are more sophisticated computers than their predecessors.

 

 

  • Like 2
Posted
23 hours ago, Wayne P. said:

Both units should be wired directly to the battery and extended with at least 14 gauge wire. Use the spade type fuse/holder. I use 12 gauge to the bow.

An alternative is to install a dedicated sonar unit fuse panel at the console supplied with 10 gauge wire. Connect each sonar unit to that panel with the correct fuse size for each. Extend the bow power cord with 14 gauge wire.

Modern sonar units are more sophisticated computers than their predecessors.

 

 

Alright I really appreciate the help! It means a lot!! 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.


  • Outboard Engine

    fishing forum

    fishing tackle

    fishing

    fishing

    fishing

    bass fish

    fish for bass



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.