tater555 Posted June 6, 2016 Posted June 6, 2016 Hey everyone, I have this Tdz that I have had for a while now that is starting to have some problems. Every once in a while, the inductor will stick (not spring outward like it should during a cast) When it happens, it causes one heck of a professional over run and I normally end up having to cut it out. When I pull the side plate off it is pretty difficult to pull the inductor outward, but once I do get it to move it will work flawlessly for a little while. I have tried lightly oiling it with lightweight bearing oil, and it didn't help much at all. Is there anything I can do to free this bad boy up? Or do I just need to go ahead and upgrade the spool? I'm hoping someone else has had this problem before and can point me in the right direction. Thanks for looking! Quote
Delaware Valley Tackle Posted June 6, 2016 Posted June 6, 2016 If you haven't , try cleaning the whole spool with simple green and hot water. If there's a little grit in there just adding oil won't fix it. 1 Quote
Super User Raul Posted June 6, 2016 Super User Posted June 6, 2016 15 hours ago, tater555 said: Hey everyone, I have this Tdz that I have had for a while now that is starting to have some problems. Every once in a while, the inductor will stick (not spring outward like it should during a cast) When it happens, it causes one heck of a professional over run and I normally end up having to cut it out. When I pull the side plate off it is pretty difficult to pull the inductor outward, but once I do get it to move it will work flawlessly for a little while. I have tried lightly oiling it with lightweight bearing oil, and it didn't help much at all. Is there anything I can do to free this bad boy up? Or do I just need to go ahead and upgrade the spool? I'm hoping someone else has had this problem before and can point me in the right direction. Thanks for looking! Excellent excuse to upgrade for a SV spool. Actually, make it two spools, a deep and a shallow. Quote
tater555 Posted June 9, 2016 Author Posted June 9, 2016 On 6/6/2016 at 0:21 PM, Raul said: Excellent excuse to upgrade for a SV spool. Actually, make it two spools, a deep and a shallow. I have been really leaning towards this solution, I really like the way they perform in the alphas. I think I will go ahead and order a steez sv105 spool. Quote
Cgrinder Posted June 9, 2016 Posted June 9, 2016 Yar, that's my solution to a sticky inductor. Make sure it's purple or it won't work properly. 1 Quote
Super User rippin-lips Posted June 9, 2016 Super User Posted June 9, 2016 Sv spool is a great upgrade to a tdz. There have been issues with the inductor getting stuck in the out position sometimes though. Just something to be aware of. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.