Jig Lures

[TedderX]

I'm looking for general information on jigs.  I've purchased two Strike King "Denny Brauer Structure Jig" (different colors) in 1/2 oz.

What trailers do you attach to them?  Do you even need to attach trailers?

You fish them predominately on the bottom (except for swimming jigs), correct?

 

[WRB]

Your question is too broad to answer in any detail. Start with the top of this forum page with jig fishing questions...18 pages should keep you busy for awhile and then come back with something more specific.

Tom

 

[avidone1]

I would just add that jig bites can be very soft.  they are a great bait, but keep an eye on the line

[TedderX]

I bought War Eagle Shakey Head, 3/8 oz and tried using them for the first time today. 

I tried texas rigging them like I do with my EWG hooks and realized it just simply doesn't work the same.

What are other ways I can attach the worm?

I'm using Zoom Original Trick Worm (Okeechobee craw).

 

 

[Bluebasser86]

Did you buy the skirted structure jigs or the plain ones? I use a trailer either way, but what type depends on which one you bough. 

 

Sounds like you rigged the shakyhead right. You could also thread the worm on the hook and use it as an open hooked jigworm. 

[WRB]

On May 5, 2016 at 7:42 PM, TedderX said:

I bought War Eagle Shakey Head, 3/8 oz and tried using them for the first time today. 

I tried texas rigging them like I do with my EWG hooks and realized it just simply doesn't work the same.

What are other ways I can attach the worm?

I'm using Zoom Original Trick Worm (Okeechobee craw).

 

 

Thank you for updating your post with specific information.

The War Eagle shakes head isn't a screw style, it's collar with barb style designed for exposed hook. You can carefully rig the worm weedless and it will have a bend at the head.

Weedlees rig with collar barb;

You insert the jig hook about 1/4" or up to the hook point barb, rotate the hook and push out and slide down the hook shank.  Turn the worm so the hook point is aligned with where the point came out of the worm, slide the head down onto the collar barb. Now push the worm another 1/2" forward and insert the hook point through the worm until it comes out the top of the worm and expose the point about 1/16". To cover the hook point, pinch the worm and slide under the plastic, this is called skin hooked.

The worm will not be perfectly straight rigging this method with this design jig, but works OK. Screw type shakes heads allow the worm to be straight.

Use a hard snap hook set the drive the point through the soft plastic and into the basses mouth.

Good luck.

Tom

[WRB]

13 hours ago, TedderX said:

I bought War Eagle Shakey Head, 3/8 oz and tried using them for the first time today. 

I tried texas rigging them like I do with my EWG hooks and realized it just simply doesn't work the same.

What are other ways I can attach the worm?

I'm using Zoom Original Trick Worm (Okeechobee craw).

 

 

double post?

[You_Only_Live_Once_Fishing]

Jigs

Written By Jack Semar

Jigs Overview

     There are many types of jigs, and it can get confusing. Typically, jigs look like crayfish. As you know, swim jigs look like baitfish. They are affective allayer long, and can be found on almost any angler's rod who is worth his "two cents" all year round. Especially prominent in the winter and summer months when bass become lethargic, are jigs. Just as one would use different crankbaits in different situations jigs are the same way. Certain jigs strive in certain areas where others do not. 

Jig Types

Football: Ever try to roll a football to your buddy? Chances are it didn't roll straight towards him. Football jigs are designed to roll like them on hard ground. The "wobble" makes it look more realistic. They usually have a horizontal line tie.

Grass: Designed for heavy cover and vegetation, grass jigs are designed to be completely weedless. Usually have a vertical line tie and thick weed guard.

Flipping: Most similar to a Grass jig, these jigs are designed to be placed into thick cover like wood piles. they have a very thick weed guard and line tie will vary.

Skipping: Designed with a flat bottom, these jigs are designed to be skipped into cover with an under-hand cast, similar to the action required to skip a stone. 

Rock: Specifically for not getting wedged in rocks, they have a wide, flat head and will come through rip rap (rocks) with ease.

Shakey: A go-to finesse bait for many anglers, the shakes head is a round jig with a flat bottom. It is designed to stand up. Try a 4-6" finesse worm.

Punching: The most heavy duty jig made, it will come through almost anything. consists of a tungsten or lead cone with a skirt and extra heavy-duty hook.

Swim: A swim jig is built with a hydrodynamic head designed to cut through the water column. Most swim jigs are designed to looked like baitfish. Whether that is shad, perch, bass, or bluegill, all are very affective. Just like a jerkbait, swim jigs can be fished a variety of ways. Experiment with multiple methods to discover the best technique for you. One method is called a straight retrieve. just reel it in consistently to keep it a desired depth. You can also try lifting your rod about a foot and then reeling in the slack. This will create a rise-and-fall action.

Bladed Swim Jigs: Basically a swim jig with a metal blade attached to the jig head. the blade creates vibration when retrieved. Will work well in dirty and clear water.

Jig Tips

Rod: 7'2" MH for MOST applications except heavy-duty stuff. Will work well in 3/8-1oz jigs. longer rod helps with cast distance and hookset.

Reel: Any bait caster with at least 10 pounds of drag will be fine. Slower gear ratios will ensure that you do not reel too fast. Faster gear ratios will help you take in line faster. 

Line: 12-20 pound fluorocarbon is best in clearwater situations. Low stretch and visibility. 15-30 pound braid. Smaller diameter and high strength are positives. When using braided line, be sure to use heavy duty hooks, as it will compliment the no stretch qualities of the line.

Color: Perhaps the most confusing aspect of jig fishing. In clear water, natural colors will work best. Bright and dark colors will be best in stained waters. 

Trailers: Try to match you trailer with your jig color. If you can not, try to match the opposite.

Written by Jack Semar on May Fourth, 2016.

[TedderX]

On ‎5‎/‎5‎/‎2016 at 2:12 AM, Bluebasser86 said:

Did you buy the skirted structure jigs or the plain ones? I use a trailer either way, but what type depends on which one you bough. 

 

Sounds like you rigged the shakyhead right. You could also thread the worm on the hook and use it as an open hooked jigworm. 

I bought both.  I'm using crawfish on the skirted ones and worms on the shakey heads.

On ‎5‎/‎5‎/‎2016 at 11:31 AM, WRB said:

Thank you for updating your post with specific information.

The War Eagle shakes head isn't a screw style, it's collar with barb style designed for exposed hook. You can carefully rig the worm weedless and it will have a bend at the head.

Weedlees rig with collar barb;

You insert the jig hook about 1/4" or up to the hook point barb, rotate the hook and push out and slide down the hook shank.  Turn the worm so the hook point is aligned with where the point came out of the worm, slide the head down onto the collar barb. Now push the worm another 1/2" forward and insert the hook point through the worm until it comes out the top of the worm and expose the point about 1/16". To cover the hook point, pinch the worm and slide under the plastic, this is called skin hooked.

The worm will not be perfectly straight rigging this method with this design jig, but works OK. Screw type shakes heads allow the worm to be straight.

Use a hard snap hook set the drive the point through the soft plastic and into the basses mouth.

Good luck.

Tom

For some reason I can't visualize this description.  Do you have a picture of what you're talking about?

[WRB]

On May 7, 2016 at 6:42 PM, TedderX said:

I bought both.  I'm using crawfish on the skirted ones and worms on the shakey heads.

For some reason I can't visualize this description.  Do you have a picture of what you're talking about?

You can google:

"How to Texas rig a plastic worm", except the hook and is your jig.

"How to rig a dater head jig", shows the exposed hook method your jig is designed for and the spring post screw most shakes head jig are design with to attach a plastics worm.

To rig the shakes head jig you have the exposed hook is easier, to rig weedless is a Texas rig on a jig head.

Hope this helps you.

Tom