Duma Posted April 1, 2016 Posted April 1, 2016 I'm spooling a new cranking setup with a 6XD and just can't decide whether to use 12 or 14 lb. fluoro. There are good reasons for using each and figure I'll let the consensus on BR decide for me. What do you think?? Quote
Super User A-Jay Posted April 1, 2016 Super User Posted April 1, 2016 The difference in casting distance, lure running depth a well as strength & abrasion resistance between 12 & 14 lb line might not be that much. May come down to where your presenting the baits. If you need depth, which when deep cranking is a by product of casting distance, the 12lb may be the way to go. If you're fishing around some cover, the slightly heavier 14 might get it done a bit better. A-Jay 2 Quote
Duma Posted April 1, 2016 Author Posted April 1, 2016 Agreed. The problem is there's cover and I need to get it deep Quote
Dan_the_fisher Posted April 1, 2016 Posted April 1, 2016 I like 12lb trilene xl for deep heavy cover cranking, I don't trust flouro for digging trenchs on the bottom, gets messed up very quickly. Quote
rangerjockey Posted April 1, 2016 Posted April 1, 2016 For the 6XD,DD22, ect. I use 8 or 10lb. Invizx. I do use a glass rod, but in 5 years with it I've never had a fish break it. 1 Quote
SDoolittle Posted April 1, 2016 Posted April 1, 2016 I usually use12lb BPS fluorocarbon. I'll go to 10lb if I'm not getting enough depth. Quote
Duma Posted April 1, 2016 Author Posted April 1, 2016 I'm happy to hear you guys can comfortably pull such a big bait with 8 or 10 lb line. Definitely feel better about using 12 now. Quote
dam0007 Posted April 5, 2016 Posted April 5, 2016 Pretty much 10lb for anything with trebles. Except Sammys and Lipless as I'm typically using mono in a higher strength. Quote
clh121787 Posted June 16, 2017 Posted June 16, 2017 On 4/1/2016 at 9:10 PM, Mosster47 said: 8lb CXX for 6 and 10XD's. Quote
Hez Posted June 16, 2017 Posted June 16, 2017 On 4/1/2016 at 1:54 PM, Duma said: I'm happy to hear you guys can comfortably pull such a big bait with 8 or 10 lb line. Definitely feel better about using 12 now. Just now, clh121787 said: The 8lb P-Line CXX is about the same diameter as 12 pound mono - it is mono coated with floro. It is super strong. Quote
Skeeter Dan Posted June 16, 2017 Posted June 16, 2017 30# P-Line braid with 8# P-Line Fluoro Leader. Quote
Super User NHBull Posted June 17, 2017 Super User Posted June 17, 2017 10 lb braid, 12 lb invisx leader..... Quote
Global Moderator Bluebasser86 Posted June 17, 2017 Global Moderator Posted June 17, 2017 I use 12lb Big Game for my deep cranks, including a 6XD. 1 Quote
Super User scaleface Posted June 17, 2017 Super User Posted June 17, 2017 2 hours ago, Bluebasser86 said: I use 12lb Big Game for my deep cranks, including a 6XD. Thats the same route I go . Quote
j bab Posted June 17, 2017 Posted June 17, 2017 On 3/31/2016 at 9:26 PM, Duma said: Agreed. The problem is there's cover and I need to get it deep Use an 8xd On 6/16/2017 at 11:31 AM, Hez said: The 8lb P-Line CXX is about the same diameter as 12 pound mono - it is mono coated with floro. It is super strong. It is super strong and much thicker diameter than average, but it's not coated with fluoro 2 Quote
Hez Posted June 18, 2017 Posted June 18, 2017 12 hours ago, j bab said: Use an 8xd It is super strong and much thicker diameter than average, but it's not coated with fluoro This is a quote from another thread, in which I was basing my information off of - "Mono means one or singular. Filament can be a strand or wire. Therefore monofilament means single or one strand. In terms of fishing line this means that the line is composed of a single monomer. Co-polymer. Co indicates or means two. Sometimes the joining of two things. For example co-worker - two workers working together. Co - uple - like a married couple. Or Co-operation. Polymer is the term to describe the joining of two or more monomers. If you remember from your algebra class, poly means many, as in polynomial or even polygamy (many wives). Therefore, you can gather from the term co-polymer that it is or should be the joining of two or more monomers. In the case of a typical copolymer line, you might see a monofilament, usually nylon, coated with say fluorocarbon. The joining of these two items is what allows it to be classified as a co-polymer. Now if you made a line from a single element that is not nylon, it could still be called a monofilament. It just wouldn't be made of nylon. If you for example combined three different types of nylon, that too could be called a copolymer because two or more elements were combined. Heck, you could even call it a tri-filament (tri, meaning three)." If I was wrong...my apologies...but my point was that it was 2 types of material combined...I was under the impression it was floro coated. Regardless, its thicker and stronger than your 8 lb test mono that most people think of when they see the term "8 lb"...that is all Quote
Global Moderator Mike L Posted June 18, 2017 Global Moderator Posted June 18, 2017 12# Yo-Zuri Hybrid Mike 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.