Jump to content

Recommended Posts

  • Super User
Posted

I think in all my years of fishing I tossed this one day for an hour and blanked. But thinking back on some bites, season is closed not much else to do, I could see where a bait rigged that way could trigger neutral to negative bass especially on cold mornings. Plus Bassmaster had an article on making your own C rig shortcuts and I had some piano wire in the shop.

The where? I have always heard deep weed lines, but I fish reeds a lot and those bass are finicky unless you show them something they don't see often. Thinking the C rig would would be a great presentation for those fish.

Baits to use? If I fished in reeds, would use the normal baits like tubes, finesse worms, and swim senkos, probably missing some. What else do you all toss and does it depend on the structure and cover you are tossing it too. 

image.jpeg

  • Super User
Posted

Brush Hogs,beavers,BIG worms,( any worm ), flukes,Baby paca craws, lizards,I think you get the picture!

  • Like 1
Posted

You can C-rig just about any plastic bait made. I really like two...the lizard and a zoom centipede. I see your from central Wisconsin, the times I fished the Wisconsin River in the Point area I did well rigging centipedes on gravel flats. In lakes I like the C-rig and lizard for covering water as long its not overly weedy. Never used more than a 1/2 oz weight, and never fished it much deeper than 20'.

  • Like 1
Posted

Just about any soft plastic will work.  My favorites are a six inch lizard and just about all of z-mans plastics, because they are so buoyant they float off the bottom where the bass can see them.  you can fish them in quite a few places, over short weeds, weedlines, almost anywhere.

  • Like 1
  • Super User
Posted

Fish the C-rig any where any time.

Use lizards.

Colors of your choice.

Don' fall for any "special" set ups. Get yourself some 1/2 ouch weights; some strong swivels; some clear glass beads; a good heavy rod; and load up that baitcaster with 20 pound fluorocarbon line.

Use Palomar knots to attach the lines to your swivels.

Go out and throw that sucker all over the place.

  • Like 6
  • Super User
Posted

get you some carolina keepers and do away with all that extra bling...  makes it infinitely easier to rig.

  • Like 2
  • Super User
Posted

I use carolina rigs as a search bait on offshore structure . Its a fast way to work around a point, flat... Zoom lizards are a classic C-rig bait . I also like plastic worms , tubes , grubs and others . 

  • Like 2
Posted

Baby brush hog for me, also like a smoking rooster and space monkey

  • Like 1
  • Super User
Posted

Like all the bait options, especially grubs which I have a ton of. Makes me realize it isn't just a finesse presentation. Also been building up my stock of Zman stuff, so that is an option. Will just have to keep myself from chopping all the baits in half to be Ned rigged. 

Wonder if a TRD or 1/2 Zinker on a short light wire hook would work?  A C-Ned-rig?

  • Like 1
  • Super User
Posted
16 minutes ago, cgolf said:

Like all the bait options, especially grubs which I have a ton of. Makes me realize it isn't just a finesse presentation. Also been building up my stock of Zman stuff, so that is an option. Will just have to keep myself from chopping all the baits in half to be Ned rigged. 

Wonder if a TRD or 1/2 Zinker on a short light wire hook would work?  A C-Ned-rig?

I never fish a classic c-rig with all the hardware and 1/2oz+ weights, but I'm a big fan of a "finesse c-rig" (or slip-shot, as WRB calls it, which is a perfect name for it) --8-10lb line with 1/8-1/4oz weight ahead of a bobber stop, 12"-16" ahead of a light-wire hook and worm or creature.  I'll put a 3 or 4" stick worm or french fry bait on there some times; literally anything you can drag around will work.

  • Like 1
Posted

When all the soft plastic choices, you'd think that they are the only way to go. I'll let you in on a little secret I learned years ago fishing central Wisconsin; Use a #7-#9 original floating Rapala on the business end ( or any other high floating/shallow running crank).  It's something the fish rarely see and it mimics natural forage so well that it works as both a power and finesse presentation. 

The 'where' is a tough one to answer as there are likely more variables to consider than choices of plastics. Touted more as a search presentation vs. a target one, structural features ( points, drops, bottom transition areas) are prime locations to target.

  • Like 2
  • Super User
Posted

I throw a Carolina rig when I have given up on catching bass by any other means for the day.

  • Like 4
  • Super User
Posted
8 minutes ago, ww2farmer said:

I throw a Carolina rig when I have given up on catching bass by any other means for the day.

I have been at this point many times, and while I have a presentation or two that I am guessing nobody or very few throw on these lakes at certain cover situations, I like to have options especially if I spend a few days on the same body of water. I have been known to try some off the wall stuff, most fail, but when it works it is a lot of fun.

 

  • Like 2
  • Global Moderator
Posted

First, lose the premade rig. Bass have to drag the sinker along behind them with that rig and it pulls and jerks on their mouth if it catches on anything which could make them drop it. You have to tie the same amount of knots anyways.

Second, you can C rig about anything. My personal favorite is a full sized brush hog. As for where, I like points, ledges, and rockpiles. 

  • Like 1
Posted
14 minutes ago, Bluebasser86 said:

First, lose the premade rig. Bass have to drag the sinker along behind them with that rig and it pulls and jerks on their mouth if it catches on anything which could make them drop it. You have to tie the same amount of knots anyways.

Thank you! I have never understood why anyone would use those premade rigs. They defeat the whole purpose of using a slip sinker.

Posted

Would a C-rig be a good bet at the tail end of the spawn/early post spawn? I've got a big trip planned and im thinking it could be a good option for me. The lake im fishing has a creek channel just off of a good 45 degree spawning bank and some rock piles in 5 to 10 feet of water on the outside of a good shallow cove. What do you guys think?

  • Super User
Posted

So really the c rig is like a mojo of split shot, but has a bead for sound and a heavier sliding weight. I may still try the pre tied rig a few times, just because I have no idea if it would work and wouldn't want to sacrifice a rod choice just yet for this, and really I want to see if the fish will hit a bait presented like that more readily then my standard presentations, if they do I can dedicate a rod to it.  

I could rig it without the swivel too right? Was thinking I could use one of those rubber T stops on a bead to hold it in place and then I only have one tie on the rig. 

5 hours ago, Bluebasser86 said:

First, lose the premade rig. Bass have to drag the sinker along behind them with that rig and it pulls and jerks on their mouth if it catches on anything which could make them drop it. You have to tie the same amount of knots anyways.

Second, you can C rig about anything. My personal favorite is a full sized brush hog. As for where, I like points, ledges, and rockpiles. 

Don't you hit it right away? I have always been in the camp of it hit when you feel it. I would rather miss a fish than gut hook it. I have never given a fish slack when I felt a bite, and it seems to work out pretty good for me.

  • Global Moderator
Posted
5 minutes ago, cgolf said:

So really the c rig is like a mojo of split shot, but has a bead for sound and a heavier sliding weight. I may still try the pre tied rig a few times, just because I have no idea if it would work and wouldn't want to sacrifice a rod choice just yet for this, and really I want to see if the fish will hit a bait presented like that more readily then my standard presentations, if they do I can dedicate a rod to it.  

I could rig it without the swivel too right? Was thinking I could use one of those rubber T stops on a bead to hold it in place and then I only have one tie on the rig. 

Don't you hit it right away? I have always been in the camp of it hit when you feel it. I would rather miss a fish than gut hook it. I have never given a fish slack when I felt a bite, and it seems to work out pretty good for me.

C rig is the only exception to that rule it seems. Even if you do try to get them right away, you've got a bunch of line out and it's down 10-30' the winds blowing and the fish are biting light. What do you think your odds are you get the fish before it swims a couple feet through the rocks you were dragging and your sinker sticks and makes the fish spit your bait? 

Not saying the pre-made rigs won't catch fish, but I don't trust them and wouldn't suggest them to anyone. 

  • Like 4
Posted

I'm not a fan of those Carolina keepers either. I like to run 15-17 lb fluorocarbon as a main line and 12lb mono as a leader. You can't do that with a Carolina keeper. If you want to make rigging easier, tie up a few leaders with a hook on one end and a swivel on the other before you leave the house. Then, all you have to do is slip on a weight and a bead and tie one knot. It may not be quite as simple as using a keeper, but it's far more effective. 

  • Like 2
  • Super User
Posted
8 hours ago, S. Doolittle said:

I'm not a fan of those Carolina keepers either. I like to run 15-17 lb fluorocarbon as a main line and 12lb mono as a leader. You can't do that with a Carolina keeper. If you want to make rigging easier, tie up a few leaders with a hook on one end and a swivel on the other before you leave the house. Then, all you have to do is slip on a weight and a bead and tie one knot. It may not be quite as simple as using a keeper, but it's far more effective. 

What ya need a leader for?

  • Like 2
Posted
12 hours ago, Bluebasser86 said:

C rig is the only exception to that rule it seems. Even if you do try to get them right away, you've got a bunch of line out and it's down 10-30' the winds blowing and the fish are biting light. What do you think your odds are you get the fish before it swims a couple feet through the rocks you were dragging and your sinker sticks and makes the fish spit your bait? 

Not saying the pre-made rigs won't catch fish, but I don't trust them and wouldn't suggest them to anyone. 

confessions of a life long t-rigger

i am the worlds worst at setting the hook on a c-rig. 50% of the time i either hit them with too much slack out or they swallow it. 

 

  • Like 1
  • Super User
Posted
3 hours ago, chadmack282 said:

what  is that Catt?

Lake Fork Trophy Lure Ring Fry #720 Fork Secret!

Carolina Rigged French Fry, Ring Fry, Centipede, & other similar baits are extremely deadly & highly over looked!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.


  • Outboard Engine

    Fishing lures

    fishing forum

    fishing forum

    fishing tackle

    fishing

    fishing

    fishing

    bass fish

    fish for bass



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.