Super User Big Bait Fishing Posted August 11, 2015 Super User Posted August 11, 2015 Anyone have em? Opinions? for musky ?? Quote
Lendiesel22 Posted August 11, 2015 Author Posted August 11, 2015 I was more curious about the line of bass rods they have. Quote
sprint61 Posted August 11, 2015 Posted August 11, 2015 They make a great musky Rod im sure there bass rods are nice also. Quote
Lendiesel22 Posted August 12, 2015 Author Posted August 12, 2015 The bass dr is the only guy i have ever seen use them. I am also curious about all star rods. I am in the hunt for light and high sensitivity at a decent price. I wont just buy a bull dawg without trying to get someones opinion on it Quote
Super User Big Bait Fishing Posted August 12, 2015 Super User Posted August 12, 2015 The bass dr is the only guy i have ever seen use them. I am also curious about all star rods. I am in the hunt for light and high sensitivity at a decent price. I wont just buy a bull dawg without trying to get someones opinion on it why don't you look into a custom , there are some nice blanks out there that you can make a killer rod without breaking the bank , think about it .... Quote
Super User WRB Posted August 12, 2015 Super User Posted August 12, 2015 Looking at the Bull Dog site it is a custom rod builder that offers a standard line of rods similar to ALX rods. It doesn't appear that Bull Dog is a rod blank mfr, the assembly rods to the users requirements, same as site sponsor DVT. Tom Quote
Super User Big Bait Fishing Posted August 12, 2015 Super User Posted August 12, 2015 Looking at the Bull Dog site it is a custom rod builder that offers a standard line of rods similar to ALX rods. It doesn't appear that Bull Dog is a rod blank mfr, the assembly rods to the users requirements, same as site sponsor DVT. Tom it's Bulldawg as in Reaction Strike , not Bulldog as in an ugly dog ... Quote
Lendiesel22 Posted August 12, 2015 Author Posted August 12, 2015 why don't you look into a custom , there are some nice blanks out there that you can make a killer rod without breaking the bank , think about it ....[/quote I just had a build done on a st croix led tourn blank from a guy i found in my area and it is lack luster to say the least. I didnt want to be rude to the guy by saying hey this sucks, just found out the hard way that i can't use him again. I know have to figure out how to strip this thing down and build it myself. He did it for 125 bucks though so at worst i got a good blank. Quote
livetofish28 Posted August 12, 2015 Posted August 12, 2015 why don't you look into a custom , there are some nice blanks out there that you can make a killer rod without breaking the bank , think about it ....[/quote I just had a build done on a st croix led tourn blank from a guy i found in my area and it is lack luster to say the least. I didnt want to be rude to the guy by saying hey this sucks, just found out the hard way that i can't use him again. I know have to figure out how to strip this thing down and build it myself. He did it for 125 bucks though so at worst i got a good blank. I don't know about the Bull Dawg rods but the Bull Dog rods out of VA have done some really good builds for the guys in the area. Tight lines Andrew Quote
Super User WRB Posted August 12, 2015 Super User Posted August 12, 2015 Very cool thanksGive sponsor DVT a call and get a quote. Most custom rod builders don't like to remove reel seats and handles, redoing guide sets isn't a problem.ALX builds my rods, Check his web site. Didn't read dawg, thought of bull dog out of VA..... Tom Quote
Lendiesel22 Posted August 12, 2015 Author Posted August 12, 2015 I bet....and that is one of the problems. Reel seat is not great and the guide placement is poor. I think i am going to dismantle it myself and use it as my 1st build. I am meticulous so this could be a good hobby for me. I dont have alot of time bc i have an 8mth old daughter and i fish when i am not doing the family thing, but its a long winter. Lol Quote
Super User WRB Posted August 12, 2015 Super User Posted August 12, 2015 A good rod builder should give you a free 30 to 90 day trail period and correct any mistakes or make a new rod. Not familiar with DVT's policy, he gets a lot of support on this site? Give him call. Tom Quote
Super User Big Bait Fishing Posted August 12, 2015 Super User Posted August 12, 2015 when considering a custom rod builder , ask for photos of previous rods made by him/her , check the internet on their website for a gallery of built rods , ask about warranty guidelines , etc.. you always have to do some research as you want this rod to be exactly as you envision , take the time to test fit different reel seats for asthetics , comfort , and look you want . research what guide material that would best suit your needs , what size guides (micro guides , tangle free guides , etc..) cost of guides , color guide frames (black , chrome , gunsmoke , etc..) what kind of handle you would like (eva, cork ,syncork, hypalon , carbon fiber tube , etc..) length of handle (measured from the back of reel seat to butt ), style of hook keeper ( open ended, closed loop , foldable , etc..) all these things need thought to how you want your rod , the potential builder should have knowledge of these things and help you deciding what works for you , cause when it's all said and done this rod should be a pleasure to fish and perform how you want it to . and by the way , get it right and you will never buy an off the shelf rod again .. Quote
Super User Big Bait Fishing Posted August 12, 2015 Super User Posted August 12, 2015 Anyone have em? Opinions? as far as Reaction Strike , they make decent musky rods but you don't hear too much about bass rods , i doubt you will , i would stick with more mainstream rod companies if i were you . Quote
Lendiesel22 Posted August 12, 2015 Author Posted August 12, 2015 A good rod builder should give you a free 30 to 90 day trail period and correct any mistakes or make a new rod. Not familiar with DVT's policy, he gets a lot of support on this site? Give him call. Tom Will do thanks. When i took it out the 1st time the top 4 guides were out of position. I took it back and explained that the line management in the last 4 guides was off and to adjust them. I got it back to find that not much was done and it looked like it was a guess as to where they were placed. Instead of repeating that process I would use it as a way to get me building. I am going to start that this fall Quote
Lendiesel22 Posted August 12, 2015 Author Posted August 12, 2015 when considering a custom rod builder , ask for photos of previous rods made by him/her , check the internet on their website for a gallery of built rods , ask about warranty guidelines , etc.. you always have to do some research as you want this rod to be exactly as you envision , take the time to test fit different reel seats for asthetics , comfort , and look you want . research what guide material that would best suit your needs , what size guides (micro guides , tangle free guides , etc..) cost of guides , color guide frames (black , chrome , gunsmoke , etc..) what kind of handle you would like (eva, cork ,syncork, hypalon , carbon fiber tube , etc..) length of handle (measured from the back of reel seat to butt ), style of hook keeper ( open ended, closed loop , foldable , etc..) all these things need thought to how you want your rod , the potential builder should have knowledge of these things and help you deciding what works for you , cause when it's all said and done this rod should be a pleasure to fish and perform how you want it to . and by the way , get it right and you will never buy an off the shelf rod again .. I will from now on, i was blinded by the convenience of it and never thought that his work would be....lets say......sloppy. 1 Quote
Super User Big Bait Fishing Posted August 12, 2015 Super User Posted August 12, 2015 I will from now on, i was blinded by the convenience of it and never thought that his work would be....lets say......sloppy. don't be dissuaded , custom rods built to your liking are such a pleasure to fish , I'm currently been researching my next rod , an 8 ft. MH fast action blank , made by Phenix rods , and by the way , Phenix is such a pleasure to deal with , talked to them about 35 minutes and they answered all my questions and even weighed blanks for me . Quote
Super User Big Bait Fishing Posted August 12, 2015 Super User Posted August 12, 2015 why don't you look into a custom , there are some nice blanks out there that you can make a killer rod without breaking the bank , think about it ....[/quote I just had a build done on a st croix led tourn blank from a guy i found in my area and it is lack luster to say the least. I didnt want to be rude to the guy by saying hey this sucks, just found out the hard way that i can't use him again. I know have to figure out how to strip this thing down and build it myself. He did it for 125 bucks though so at worst i got a good blank. Definitely keep the blank , a good builder can strip that blank and redo it !! Quote
Super User Big Bait Fishing Posted August 12, 2015 Super User Posted August 12, 2015 why don't you look into a custom , there are some nice blanks out there that you can make a killer rod without breaking the bank , think about it ....[/quote I just had a build done on a st croix led tourn blank from a guy i found in my area and it is lack luster to say the least. I didnt want to be rude to the guy by saying hey this sucks, just found out the hard way that i can't use him again. I know have to figure out how to strip this thing down and build it myself. He did it for 125 bucks though so at worst i got a good blank. Definitely keep the blank , a good builder can strip that blank and redo it !! Quote
Lendiesel22 Posted August 12, 2015 Author Posted August 12, 2015 What if it was a rookie builder with big aspirations???? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.