Jump to content

Recommended Posts

Posted

You probably dinged it somewhere along the way. That's usually what I think when a rod that has performed for months suddenly snapped. If there's a replacement program for that rid I'll persue it, but I don't see this as a warranty issue. Rods are fragile. It's like trying to warranty a dozen eggs after they leave the store, lol.

 

So here's a question, maybe some guys will have some advice. 

 

I think it's safe to say the most fragile portion of a rod is probably the space within the last 3 tips. It's obvious tips are almost a guarantee to get wiped out, heck you can buy a re-tip kit at Wal-Mart. So it's pretty easy to assume that the rod is fragile there.

 

That said, what do you guys use to keep rod tips safe? I don't have a truck, I have a car, which requires me to put down the back seat and feed the rod in up through the trunk. That would be a possible danger point. Not to mention loading and un-loading rods off of boats. Are there devices (other than entire rod tubes) that you can stick on the end of a rod, maybe 12" long and plastic that would aid in just protecting the tip during transport?

 

I'm not really talking about the actual handling of the rod, I understand the basics, no highsticking, rated lure weights, etc. I'm talking more about storage and transport that would lend itself to keeping the tip of the rod protected from stuff, dings, and such.

 

Might be worth inventing....maybe something strong enough that doors, trunks, and tailgates would really have to be slammed hard to do any damage to.....

 

Any tips/ideas?

  • Super User
Posted

I pretty much am careful. Last few rods I broke snapped mid rod, on the hookset.

Posted

I used to think that you payed more for a rod with a replacement program. In fact, you must. But is it noticeably more? I mean is my Avid twice as much as it should be? It certainly is a little bit more, but is it way off other rods in the same price category? Not really. It's not like you're getting only a $100 rod for $175. Is it?

It depends on the circumstance I think. My egg analogy was admittedly over the top for effect. A company's sales levels would obviously pay a big role as the more rods the cost is spread amongst the lesser the effect on individual price. It's more of the principle to me. Whether it's $20 or $200, I don't like paying for something I don't need and more so for other's to abuse the system. We've all heard the stories. At the end of the day I won't pay for extended warranties on anything and give warrantee no weight at all in a fishing rod purchase. 

  • Super User
Posted

I don't think anyone is intentionally snapping rods to pay $75 to replace them.

  • Super User
Posted

Can't wait to see the responses to this....

 

There is NO sense in responding to this.

Posted

lol No, but I suspect some are much more careless than I might be . But I suppose if it's a "Replacement" program as opposed to a "warranty" they probably don't care how it happened. In my mind I differentiate between the two. Still not a selling point for me personally, but people must like the idea or the manufacturers wouldn't keep doing it. 

  • Super User
Posted

I just broke my new rod. IM TELLING YOU, everytime I read a thread about something bad happening it happens to me!! Uggggh! And of course its the most expensive rod I've ever bought. My St.Croix mojo ML and I haven't had it but 2 and a half months.

Been bank fishing for all of thirty minutes and the tip snaps off, well I guess sooner is better than later... Hopefully St.Croix will give me my replacement/refund.

  • Super User
Posted

So I'm reading on the st.Croix website and apparently I have to send a 20$ check and pay for shipping for the possibility that they may not even give me a replacement? How much does it cost to send a freaking 6 and 1/2 long pole? Shoot you might as well buy a new friggin rod!

  • Super User
Posted

Sorry I know shipping rods isn't that expensive, probably like 30$... I'm just a little ticked off haha

  • Super User
Posted

Sorry I know shipping rods isn't that expensive, probably like 30$... I'm just a little ticked off haha

 

Go back on the site & look for the shipping label program. It's on the left hand side of the warranty & sevice tab You buy a preprinted label for 15.00 fed ex shipping. It's a special program they offer their customers. Then all you have to do is take your rod in a shipping tube to a fed ex facility for shipping.

  • Like 2
  • Super User
Posted

Go back on the site & look for the shipping label program. It's on the left hand side of the warranty & sevice tab You buy a preprinted label for 15.00 fed ex shipping. It's a special program they offer their customers. Then all you have to do is take your rod in a shipping tube to a fed ex facility for shipping.

Okay, thanks for the tip. I'll look into that!

Posted

shoulda went with an ugly stik lol (im dead serious though)

 

also, the more expensive rods, yeah theyre going to break. never seen anyone break a cheaper rod though...

^^^^^^^^^^^^^^^^^^^^^^^^^^^^advice

 

I just broke my new rod. 

 

And of course its the most expensive rod I've ever bought. My St.Croix mojo ML and I haven't had it but 2 and a half months.

couldve bought a cheaper rod and a better reel(the reel being more important anyways). ive never spent more than $40-50 for a rod and ive never broken one and they still catch fish just fine...

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.


  • Outboard Engine

    fishing forum

    fishing tackle

    fishing

    fishing

    fishing

    bass fish

    fish for bass



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.