Jump to content

Recommended Posts

Posted

After having my fly tying tools in cardboard boxes and no where to keep them, decided to make a fly tying bench. Started this over a month ago and changed the design several times. Used old scrap lumber I had laying around in the garage - spent less than a dollar on this project.

The plan is to build a "prototype" then after I have it situated and arranged the way I want, will rebuild in oak and finish. Nothing is glued, so I can take a part and rebuild using better wood - one day.... :;)

Getting started in the picture below. I had the left side complete and on the bottom board. Initially, wanted it a little lower than the back "wing" thread holder. But eventually decided against it and made everything level/flush. made the back thread holder supports shorter and it all worked.

P1050382.jpg

The next weekend when I worked on it, decided I wanted to make the back wing thread holder a little wider. So, chopped the first one down and put it on the board as an "orgainzer" and wire holder. Was a pain boring out for the thread holders, but, really like the look of the recessed holes.

P1070392.jpg

Got it complete weekend before last, but, was unable to do anything with it until last night. Tied a couple and really like it - nice to finally have somewhere to keep my stuff instead of the cardboard box. However, I am thinking the right side holder will have to go - wants to get in the way a little for my right hand/arm. Think I will attach it to the left side like a stair step and make a short one to replace it.

DSC06325.jpg

Overall very pleased. The best part - I have $0.55 in it - for the doweling I use as the thread holder.

  • Super User
Posted

Awesome job!!  

Nothing like having a special place to do your work. The whole world seems to go away when your tying em up. Be sure to post up some pictures of the finished product. I will look forward to seeing it!

Here's mine, made of red oak and basswood..............

01190007.jpg

01190006.jpg

01190008.jpg

Ronnie

  • Super User
Posted

wow thats great! what a bargain too  ;D

keep it up man, maybe you could make a few of them and sell them for a good chunk of money...

as for me well, i paid $0 for my tying bench because i got it from my aunt when she was cleaning out her basement. its a huge computer desk and i put a few plastic organizers on it. its pretty cool. i like it. better than when i used to be tying on my 1 square foot nightstand  :;)

Posted

Thanks guys.  Got some more updates to make - at some point....

Alpster, that is one nice setup you got going there.   A+!!!

  • Super User
Posted

Wow, very impressive. Good to see other builders out there. You've started my wheels turning and I might have to make a similar set up, but one that I could break down.

A beautiful setup, but an eyesoar to the Mrs.  :;)

Alpster, yours is pretty cool too. 8-)

  • Super User
Posted
A beautiful setup, but an eyesoar to the Mrs.  :;)

Most of us fight that battle to some degree...  my fly tying set up is also portable, for just that reason.  However, I'm not as organized or as tidy as Ronnie!!

  • Super User
Posted
A beautiful setup, but an eyesoar to the Mrs.  ::)

Most of us fight that battle to some degree...  my fly tying set up is also portable, for just that reason.  However, I'm not as organized or as tidy as Ronnie!!

Hey Keith,

Those pics are just like my drivers license picture, I wash my face and cut my hair every 4 years weather I need it or not. You should see it when I am working on something. It normally looks like a hurricane hit it.  ;)

BTW My little work table is very portable. I sometimes pick the whole thing up and take it to the kitchen to get away from the office phone.

Ronnie

  • Super User
Posted
I sometimes pick the whole thing up and take it to the kitchen to get away from the office phone.

If I could have my office phone in my rodbuilding and fly tying space, I would look forward to work everyday!!   ;D

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.


  • Outboard Engine

    fishing forum

    fishing tackle

    fishing

    fishing

    fishing

    bass fish

    fish for bass



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.