BassnChris Posted January 8, 2015 Posted January 8, 2015 Do you have any pics of how your electric steer trolling motor is mounted? Looking for a better way than I have my Motorguide xi5 installed........I feel like it hangs off unsupported way to far. But that is how it is with Motorguides installation information. They don't seem to be designed for use on fiberglass bass boats......it's the down sweeping arched gunwales that cause the problem. Any pics or ideas? Thanks Quote
Super User slonezp Posted January 8, 2015 Super User Posted January 8, 2015 The electric steer motors hang over a bit. Here's my Terrova Quote
BassnChris Posted January 8, 2015 Author Posted January 8, 2015 Yeah.......if you look at mine.......50% of it hangs off unsupported.........where the gunwale starts to roll down at the 'ui' in Motorguide. Just seems like way too much and I think it vibrates/makes noise as a result. Seriously planning on going back to cable steer......I'll miss the electric steer features. Quote
Super User slonezp Posted January 8, 2015 Super User Posted January 8, 2015 Minn Kota makes a sliding mount for their motors. It allows the motor to slide back during transport. Doesn't do you any good, but it's an option Quote
cyclops2 Posted January 8, 2015 Posted January 8, 2015 Did you call the company & ask for Technical Support people ? Do that. Quote
Super User Long Mike Posted January 8, 2015 Super User Posted January 8, 2015 When I installed my Terrova, I deployed the motor, and then moved the mount back until the shaft cleared the gunwhale by about a quarter inch. That's where I anchored the mount. Works like a charm, but there is still a bit of overhang, say three inches. 1 Quote
BassnChris Posted January 8, 2015 Author Posted January 8, 2015 If motor guide would have designed it without that big curved beck..........it would have been flat/straight bottom and a sliding bracket and there would be no issues with it. And if Minn Kota would have arranged for lowrance to work with their unit there would be Jo issue. I'm just at a loss as to why Motorguide and Minn Kota joined forces to thwart me? I don't like being thwarted! 1 Quote
cyclops2 Posted January 8, 2015 Posted January 8, 2015 Add Bass Pro to your un favorites as the buy up product lines. Monopolies & price fixing are standard now. Quality and selection goes down the tube. Quote
Super User 00 mod Posted January 8, 2015 Super User Posted January 8, 2015 Best pictures I can do from work. Mine is set up like Long Mike's, as per the instructions! Jeff Quote
Super User Way2slow Posted January 8, 2015 Super User Posted January 8, 2015 it looks pretty close to me. When it's deployed, how much space is there between the shaft or drive unit that turns it and the bow. It looks like there is only going to be minimal space between them once you deploy it. If you get it back to far, it's going to hit the bow and not be able to deploy. Quote
KDW96 Posted January 9, 2015 Posted January 9, 2015 When I installed my Terrova, I deployed the motor, and then moved the mount back until the shaft cleared the gunwhale by about a quarter inch. That's where I anchored the mount. Works like a charm, but there is still a bit of overhang, say three inches. I picked up a older minkota pd40- and mounted it just as Long Mike did. Works perfect. Maybe a pick of yours deployed would help to see how much gap there is between them? Hope you get it worked out-good luck-KDW96 Maybe to close causing vibration noise ? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.