Jig Rod Length

[ChrisWi]

Okay, I know I've made a lot of topics relating to rods in the last month but I'm just trying to get the most out if my next purchase so...

I'm looking at getting a New Powell Max 3D. I fish a lot of finesse jigs and can not deciede between two models, the 723 or 683. I like the idea of a longer rod for deep water hooksets but like the shorter rod for the reduced weight and I have always been a fan of shorter rods. Any input would be great

[WRB]

Learn to hook set by using a combination of your reel and rod working together, longer rods don't necessarily equal better hooks sets!

My hook setting technique at distances of 30' to 120' is my reel setting and rod to set after all the line is tight.

Keep your rod tip pointed towards the jig and crank fast to get the line tight and the hook point started into the basses mouth, then while still cranking sweep the rod back firmly, the hook will penetrate through the basses mouth, if you use premium sharp hooks.

My jig rods are 6' 10" because they fit my boats deck and my preference for casting jig rods.

Tom

[ChrisWi]

Learn to hook set by using a combination of your reel and rod working together, longer rods don't necessarily equal better hooks sets!

My hook setting technique at distances of 30' to 120' is my reel setting and rod to set after all the line is tight.

Keep your rod tip pointed towards the jig and crank fast to get the line tight and the hook point started into the basses mouth, then while still cranking sweep the rod back firmly, the hook will penetrate through the basses mouth, if you use premium sharp hooks.

My jig rods are 6' 10" because they fit my boats deck and my preference for casting jig rods.

Tom

I do reel set my fish, just thought an extra 6 inches would help on a real long cast

[ABW]

The 723 would be perfect. I have a 683 but I don't really like throwing jigs on it. The 723 would also be awesome for other techniques, ex spinnerbaits, swim jigs

[WRB]

You can cast a jig over 50 yards using a longer 7'6" crankbait rod, not well suited to set heavier diameter jig hooks.

Longer jig rod will add a few yards of casting distance if it loads up properly with the weight jigs you cast and the reel, line used. Although I can cast up to 50 yards with my jig rods, usually cast about 30 to 35 yards, a long jig cast.

Get a rod that you are comfortable with.

Tom

[Raul]

Tom, never argue against the wisdom of a teenager.

[roadwarrior]

Get a rod that you are comfortable with.

 

 

IT REALLY doesn't matter.

 

 

 

[smalljaw67]

I do reel set my fish, just thought an extra 6 inches would help on a real long cast

 

I have a 6'6" and a 6'10" jig rod in addition to my flipping stick and my pitching rod, they serve a purpose, for making short cast accurately when I can't get close enough to make a pitch. That said, if I was going to use 1 rod, a 6'8" to 7' would be the most versatile as you can make the short accurate casts but you still have enough length for distance when needed. It comes down to what you feel comfortable fishing, a long rod serves no purpose if it feels clumsy to you, manufacturers still make jig and worm rods under 7' for a reason, not everyone throws a long rod for jig fishing, so go with the length you like the best because it is you that is using it.

[Ozark_Basser]

Okay, I know I've made a lot of topics relating to rods in the last month but I'm just trying to get the most out if my next purchase so...

I'm looking at getting a New Powell Max 3D. I fish a lot of finesse jigs and can not deciede between two models, the 723 or 683. I like the idea of a longer rod for deep water hooksets but like the shorter rod for the reduced weight and I have always been a fan of shorter rods. Any input would be great

The extra 6 inches will help with a longer cast and easier hookset.  I don't know how tall you are, but the extra 6 inches will probably make short accurate casts and skipping baits to targets like docks a bit harder as well.  If you fish jigs in deep water a lot with real long casts, I'd go with the longer one.  If you go out a lot with your dad or whoever and just troll the banks mostly and stay about 50 ft from the bank I wouldn't bother with the long one.  It just depends.  I don't use anything less than 7 foot, but I'm 6'3.  

[ChrisWi]

The extra 6 inches will help with a longer cast and easier hookset. I don't know how tall you are, but the extra 6 inches will probably make short accurate casts and skipping baits to targets like docks a bit harder as well. If you fish jigs in deep water a lot with real long casts, I'd go with the longer one. If you go out a lot with your dad or whoever and just troll the banks mostly and stay about 50 ft from the bank I wouldn't bother with the long one. It just depends. I don't use anything less than 7 foot, but I'm 6'3.

I'm about 6 foot and pitched docks with a 7' all summer and it wasn't too bad.

[ChrisWi]

Tom, never argue against the wisdom of a teenager.

I didn't argue with him?

[Ozark_Basser]

I'm about 6 foot and pitched docks with a 7' all summer and it wasn't too bad.

If you're six foot tall then it probably won't feel too long for you.  I like to have a long rod as long as it's practical.  A lot of old schoolers use shorter rods and have for years.  I guess it's just the way they were brought up. My dad and grandpa are the same way.  

[Angry John]

I like my 7 footer but i am 6'5"  Of note i am fishing from a yak and sitting down so you will be able to use the same length standing with no issue.  I own a few 7'3" and dont like them as much.  I feel that anywhere from 6-10 to 7 will be very comfortable for most anglers.

[ChrisWi]

If you're six foot tall then it probably won't feel too long for you. I like to have a long rod as long as it's practical. A lot of old schoolers use shorter rods and have for years. I guess it's just the way they were brought up. My dad and grandpa are the same way.

I steelhead fish with a 8' 6" all the time so anything under that is fine

[ChrisWi]

To anyone who has expierience with Powell Rods, is a 683 gonna be enough to throw 3/8 jigs?

[ABW]

To anyone who has expierience with Powell Rods, is a 683 gonna be enough to throw 3/8 jigs?

I have the Powell Max 683, and it feels best with 1/4 oz jigs with trailers. Quarter oz jigs with trailers = about 3/8 oz. I tried throwing 3/8 oz jigs before and the rod felt a bit overloaded. The 723 should be able to handle 3/8 oz + trailers no problem, as long as you're using jigs that don't have super heavy gauge hooks. If you're using finesse jigs, it should work awesome. 

 

Edit: This is what I would throw 99 percent of the time on the Max if I was using a jig. 1/4 oz jig made for skipping docks.

 

[ChrisWi]

I have the Powell Max 683, and it feels best with 1/4 oz jigs with trailers. Quarter oz jigs with trailers = about 3/8 oz. I tried throwing 3/8 oz jigs before and the rod felt a bit overloaded. The 723 should be able to handle 3/8 oz + trailers no problem, as long as you're using jigs that don't have super heavy gauge hooks. If you're using finesse jigs, it should work awesome.

Edit: This is what I would throw 99 percent of the time on the Max if I was using a jig. 1/4 oz jig made for skipping docks.

I use finesse jigs 3/8 most of the time but I read a lot of reviews saying the old Max was very soft

[ABW]

I use finesse jigs 3/8 most of the time but I read a lot of reviews saying the old Max was very soft

I wouldn't say that the Old Max is a true MH. It's in between a M and MH. If you do get the 723, you can use other things than finesse jigs because it's one of the most versatile models Powell makes.

[ChrisWi]

I wouldn't say that the Old Max is a true MH. It's in between a M and MH. If you do get the 723, you can use other things than finesse jigs because it's one of the most versatile models Powell makes.

I think I'm going to go with the 723

[ABW]

You will love that rod. Powell makes very good stuff

[bbodkin]

I own a powell max 704 and it's great for jigs. Has a soft tip which I like for jigs, I also use it for frogging