Super User new2BC4bass Posted October 7, 2014 Super User Posted October 7, 2014 Yup. 45-50 years ago that is all I did. Currently I am using the drags as I don't use my spinning reels enough to be comfortable with the drag locked down. However, as stated, I probably don't need the drag locked down today. Quote
Super User SirSnookalot Posted October 7, 2014 Super User Posted October 7, 2014 An interesting event happened this morning along this subject line. I casted out a cast champ spoon, as soon as it hit the water I get a strike, before I put my hand on the crank. With lighting speed I had line peeling off, thought I was going to be spooled with about 250 yards of line. I tighten the drag to what I thought may have been 20+ pounds of drag on my Quantum cabo 40, the line still being pulled but I was slowing the fish down to have a shot at landing it. I was very happy not to be backreeling and doubt I could have landed it, I was very unhappy the fish spit the hook lol. Don't know what this fish was or how big (have a hunch), but I did land an apx. 70# tarpon on the same outfit early this year, this one made that feel like a guppy. Side note, big kudos to my bristol knot (real similar to the alberto) and loopknot, they held just fine. Quote
Super User everythingthatswims Posted October 7, 2014 Super User Posted October 7, 2014 Why should something that someone else does upset you? They aren't free-spooling your fish. For what it's worth, I have landed countless fish from bass to bluegill by giving them total complete slack in the line. A fish wrapped in brush or weeds will often times quit fighting and reverse course away from the obstruction if it doesn't feel the pressure anymore. Once the fish is back into more open water, the fight can resume. Haha I just have my fishing pet peeves, I'm sure I'm not the only one... I totally get it when you freespool a fish that is in brush, I do it too. I'm talking about people continuously take the reel in and out of free spool while playing the fish in open water, I just back off my drag in that situation, it's hard for me to trust my thumb as a drag system, and some of my reels won't go into free spool when there is a lot of pressure on the spool anyways. Quote
Super User J Francho Posted October 7, 2014 Super User Posted October 7, 2014 There's plenty of guys that are way better than I that do things I'd never do, and can still out fish me. Look at Ike, ripping line off his spinning reel...what is the point of that? Oh well, he could still smoke me, lol. Quote
Super User CWB Posted October 8, 2014 Super User Posted October 8, 2014 Not on spinning reels. First thing I do is check and set the drag on all my outfits before leaving the dock. I've hit freespool on my crankin rod when I see a big pike or musky with my expensive crankbait in his mouth and let him run around a bit before bringing him in. Keep your thumb on the spool though. Quote
Super User Paul Roberts Posted October 8, 2014 Super User Posted October 8, 2014 I've back-reeled chinook salmon and steelhead -and with running room. It's just not a problem. You get to know how much tension to apply. It's easy. I can't imagine NOT being in touch with the break strength of my lines. Heck, I even back-reeled steelhead on 1kg line. A big advantage to back-reeling with such long distance runners is that line twist doesn't build up in the reel as it does with drag. One big salmon and my buddy's spinning reel spools turned into crazy coiled springs ready to explode in a tangle. One would never see this in bass fishing though, although it is potentially cumulative there too. Quote
fish365 Posted October 8, 2014 Posted October 8, 2014 I do it in the winter tightlining with 4-6lb line. Quote
Super User Jeff H Posted October 8, 2014 Super User Posted October 8, 2014 You know, it isn't inconceivable to be able to back reel AND let the drag work in the same fight. All you gotta do hold the handle and let the drag kick in if they run faster than you can keep up with. Bass do not peel off long runs, they are not Tarpon or Salmon. I have back reeled plenty of 5+ lb pike that have made high burst runs and have never had a bass on that could match the burst speed of a big pike. Quote
Super User Paul Roberts Posted October 8, 2014 Super User Posted October 8, 2014 Speed isn't even an issue. One can let go of the handle if you need to. You then stop the rotor with your rod hand. Quote
Super User SirSnookalot Posted October 8, 2014 Super User Posted October 8, 2014 I have caught a fairly wide variety of fish both in fresh and saltwater, there are species I wouldn't consider back reeling. Some are just too fast, too powerful and too big. In fairness not all fish make the same kind of runs, as far as the duration of the run, number of runs before they tire, the distance of the run, and IMO the hardest with fish changing direction on the run and swimming back at you, hard to keep a tight line on those. If one chooses to back reel with a 40 mph fish, be my guest, I'll go with my drag. Quote
Super User Paul Roberts Posted October 8, 2014 Super User Posted October 8, 2014 Guess I've only br'd 30mph fish. So I can't say. But bass are a 15mph fish, at best. Quote
Super User OkobojiEagle Posted October 8, 2014 Super User Posted October 8, 2014 Speed isn't even an issue. One can let go of the handle if you need to. You then stop the rotor with your rod hand. I'm not a fan of this... you've given up all control of the fish during when your rotor is free-spinning and stopping the spinning rotor is not a smooth process. oe Quote
Super User J Francho Posted October 8, 2014 Super User Posted October 8, 2014 Guess I've only br'd 30mph fish. So I can't say. But bass are a 15mph fish, at best. Paul, do you even own a spinner made after 1988? LOL....... Quote
Super User Paul Roberts Posted October 8, 2014 Super User Posted October 8, 2014 Paul, do you even own a spinner made after 1988? LOL....... Come to think of it... No! I looked for good set of gears: Quick, Zebco Cards, Daiwa, ... and never looked... forward. Never saw a reason to add any bells and whistles on top of a good gear package and spool size. Which reminds me, I do have some newer reels: some SuperCasters (which are poor substitutes for my old workhorses). I've always had a thing for spinning reel design and even designed my own (on paper). They all lacked drag completely, being back-reelers. I'm not a fan of this... you've given up all control of the fish during when your rotor is free-spinning and stopping the spinning rotor is not a smooth process. oe I stand by my statement. There is as much "smoothness" as is needed in the flex of the rod. Anglers would find out very quickly that their paranoia is for naught. Back-reeling is cake. Letting go of the handle, if need be, and re-catching the rotor is cake. On a typical bass fight, I rarely give line. If the fish tries to make headway on me, I may lower the rod a little to absorb it. If it's determined I'll budge a half turn. On pike, and trout, or a feisty smallie on UL tackle I may have to leggo the handle for a short run. No problem, my rod hand catches the rotor and the rod is still doing its job. I control all the line going in and out of my reel. Breaking point can be readily felt in the rod. If it's a long fight, or my line is damaged, I can back off. I have complete control when the fish is far out, or right at the boat. All this said, y'all, and newbs, should stick to drag. I would guess drag is better today than it was. I wouldn't know. And bass don't take enough line to cause much twist. I started back-reeling bc the Lindners, Rich Zaleski, Spence Petros, and all the guys back then did. Guess I'll die with my drag locked down, and take back-reeling with me. 1 Quote
Super User roadwarrior Posted October 9, 2014 Super User Posted October 9, 2014 This guys claims no one is quick enough to choose back reeling over a proper drag setting, but what does he know? https://www.google.com/search?q=fish+chris&tbm=isch&tbo=u&source=univ&sa=X&ei=DqI2VN-gEsKiyASu0IDgCg&ved=0CB8QsAQ&biw=1536&bih=864#facrc=_&imgdii=_&imgrc=O7m-SZOsHwoIVM%253A%3BZMbpdnCWRsy66M%3Bhttp%253A%252F%252Fwww.meanmouthbass.com%252Fwp-content%252Fuploads%252F2013%252F01%252Fmeanmouthfishchris.jpg%3Bhttp%253A%252F%252Fwww.meanmouthbass.com%252Ffish-chris-with-giant-mean-mouth-bass%252F%3B660%3B510 Quote
Super User J Francho Posted October 9, 2014 Super User Posted October 9, 2014 Drags are so much better now. I find the gradual slip a good drag provides, along with "giving the fish some rod" as Paul describes actually tired a fish out pretty quick. Bass usually aren't a big deal, unless you're chasing big ones with light line, so it's not something to get too worried about what is better. What is actually better for the particular person is really up to their skill set, and how they can use the tools. A lot more goes into playing a fish than just drag or back reeling. I'll bet Paul, Fish Chris, and myself all lost our share of fish figuring out what works, and whether someone back reels or uses drag, or a little of both won't change this. Nothing better learning how to deal with getting your string pulled, by actually getting your string pulled. Quote
Super User smalljaw67 Posted October 9, 2014 Super User Posted October 9, 2014 I know some old timers that are pretty adept at it. Modern drags are far superior for me. I like to use good equipment but when it came to spinning it was about the rod more than the reel so back reeling was a way to compensate for drags I didn't trust. Now the modern reels have much better drag systems, my Daiwa Tierra and my Okuma Inspira have fantastic drags and since I've been using them I haven't had to back reel. I will say that back reeling is a good measure to use even with a good drag as it allows you to set your drag and leave it and if you end up with a large fish you can simply back reel instead of trying to add or subtract drag while fighting the fish. 1 Quote
Super User Paul Roberts Posted October 9, 2014 Super User Posted October 9, 2014 I've never lost a fish that could be attributed to back-reeling. Back-reeling is just... a no brainer. I'm really not suggesting that anyone go to back-reeling. Just suggesting that you lose nothing if you did. It's not hard. And one can handle fish much bigger and faster than bass doing it. I am making the assumption that there are advantages to back-reeling, such as having complete control over line going out, being able to lock down when you want to, and with line twist. But then I don't know what advantages drag offers. I've never used it, except with my casting reels, and then I'm always aware that I'm at the mercy of a "setting". Quote
Super User OkobojiEagle Posted October 10, 2014 Super User Posted October 10, 2014 I am making the assumption that there are advantages to back-reeling, such as having complete control over line going out, being able to lock down when you want to, and with line twist. But then I don't know what advantages drag offers. I've never used it, except with my casting reels, and then I'm always aware that I'm at the mercy of a "setting". We agree, except for the part about letting the rotor spin freely... oe Quote
Super User Paul Roberts Posted October 11, 2014 Super User Posted October 11, 2014 With regular bass-sized spinning reels I just haven't had to leggo the handle for bass. I have on UL sized reels and... it's just NO problem. You don't have to catch the handle with the reeling hand. One uses the fingers of the rod hand, the same ones you pick up the line with on every cast. It's ... cake. I can understand the fear, but... it's unfounded. Maybe it's due to fear of line twist issues? I can say that if one puts line on correctly, and don't let the drag build twist up, line twist isn't an issue. I do wet my spool, however, when I start a day's fishing -cheaper than "line maintenance" sprays. Then again, there is no slack introduced when fighting a fish, even when letting go of the handle. Guess I've defending back-reeling all I can. For the record, anglers nowadays should stick to drag; it's even less of a no-brainer than back-reeling I suppose (except for the "proper settings" part, and maybe the adjustments mid-fight part, or the line twist part). But if you did back-reel, the reel wouldn't explode in your hands. In bass fishing, the rod does the majority of the fighting, the reel just holds line. 1 Quote
Super User J Francho Posted October 11, 2014 Super User Posted October 11, 2014 I know where Paul is coming from. I don't back reel a spinning reel, but with a centrepin, that is all you can do - there's no drag, gears, anti reverse - just an arbor on a bearing. The fish takes line, and you control how much with you pinky. It's a different way to fish, for sure. I'm not sure that I can say I've never lost a fish because of the low tech, but like anything else, you learn to use the tool and exploit it's strengths. I know I'll never use anything else in current. It's so simple. Not really a bass fishing rig, but I have caught smallies in rivers with it. I think a few will pick up back reeling, but I don't see it becoming the norm. Drags are so, so, so much better. Never mind that you can do exactly the same thing as Paul dies with his finger, to feather the spool if you need some extra stopping power. I don't recommend back reeling (or forward reeling) what the drag us spinning. You gain nothing and twist the heck out of your line. Quote
Super User Paul Roberts Posted October 12, 2014 Super User Posted October 12, 2014 ... I don't recommend back reeling (or forward reeling) what the drag us spinning. You gain nothing and twist the heck out of your line. I assume you mean "when the drag is spinning". I've always wondered about that. Mostly bc my son would reel like mad with his ABU spin-cast reel on a good bass, stale-mated against the the drag -the drag clicking away, him reeling, the line twisting, and me wincing. If he stopped reeling slack might form and he could lose the fish. Crank down the drag and he could bust off a really good one. Now spin-cast has a relatively slow retrieve rate and he was a kid with short arms, and not as adept with the rod. But what does one do with a spinning rig? What happens on a bass heading into trouble? Is the drag set so close to breaking point, or do you put your finger on the spool at that point? How do you lock down when you need to? Ever find that when a bass is able to turn it's head down into cover, it's moments from being buried? How do you keep it's head up? I can lock down, and give no quarter, and keep reeling. If I had drag, wouldn't it be giving when I don't want it to? And do I really want to stop reeling? Quote
Super User J Francho Posted October 13, 2014 Super User Posted October 13, 2014 What bass owns you that bad? My 2nd biggest NY bass (7-1) made three drag stripping runs. Never felt helpless, or out of control. I can't tell you the lake on the internet, but it was one of those stump filled, CNY mud puddles. Plenty of heavy cover. Quote
Super User Paul Roberts Posted October 13, 2014 Super User Posted October 13, 2014 I get "owned" every now and then by bass in heavy veges. If I can keep the head up and the fish pointed my way they won't bury. But I prefer casting tackle in heavy stuff anyway, and I'm using drag there. I just have to go heavy enough in line weight to compensate. Same for spinning I suppose. Quote
Super User SirSnookalot Posted October 14, 2014 Super User Posted October 14, 2014 3 drag stripping runs, pretty potent bass. A 7# isn't out of the norm here, I'd like to see one own me. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.