Jim Mac Posted July 13, 2014 Posted July 13, 2014 I want to use these bolted to a vertical 2X4 on my trailer, to haul a kayak(40 lbs). Do you see a problem with that? If OK, how do you suggest strapping kayak down? Since it's "open" I'm worried about the strap coming off. Thanks. http://www.dickssportinggoods.com/product/index.jsp?productId=11317207&kw=j-cradles&origkw=j-cradles Quote
papajoe222 Posted July 13, 2014 Posted July 13, 2014 The link is for hanging a yak on the wall. I'm not sure how you envision using them on a trailer, but unless you plan on mounting and supporting a sheet of plywood vertically, I can't picture a way to use them. If you don't mind a suggestion, a car top bracket can easily be mounted to a flat surface. Most will hold two yaks and on a trailer would give plenty of support. Quote
Jim Mac Posted July 13, 2014 Author Posted July 13, 2014 They would be bolted to a vertical 2X4. Regular J-cradles cannot mount to a vertical surface, can they? Quote
Super User flyfisher Posted July 13, 2014 Super User Posted July 13, 2014 I would not use them in the application you mention. Why does it have to be mounted vertically? If you have cross beams or even a flat horizontal trailer it should be no issue to toss it on there and strap it down. Quote
Jim Mac Posted July 13, 2014 Author Posted July 13, 2014 I would not use them in the application you mention. Why does it have to be mounted vertically? If you have cross beams or even a flat horizontal trailer it should be no issue to toss it on there and strap it down. Thanks flyfisher. The reason is I have to be able to haul 4 kayaks. My Frontier 12' is on the bottom, since it's so wide and heavy, so I have to find room for 3 more. I was thinking of 2 sitting flat on the top, and 1 mounted vertically on 1 side. If all 3 go on top, I would need to use 3 sets of J-cradles. My concern is the J-cradles getting stolen while we're out on the water. Do you think those cradles are not strong enough? Quote
Super User flyfisher Posted July 13, 2014 Super User Posted July 13, 2014 Thanks flyfisher. The reason is I have to be able to haul 4 kayaks. My Frontier 12' is on the bottom, since it's so wide and heavy, so I have to find room for 3 more. I was thinking of 2 sitting flat on the top, and 1 mounted vertically on 1 side. If all 3 go on top, I would need to use 3 sets of J-cradles. My concern is the J-cradles getting stolen while we're out on the water. Do you think those cradles are not strong enough? Well my thing is those cradles are not designed for a moving vehicle and the forces encountered. How wide is your trailer? and do you have a pic? i am having a tough time visualizing what you are describing. And i doubt anyone would steal the j cradles but anything can happen. I used to have J cradles on my subaru and they could be removed in about 2 minutes with no tools and i never had them stolen. Is it not possible to just stand them all up on their side for transporting one next to the other? Quote
Jim Mac Posted July 14, 2014 Author Posted July 14, 2014 The width of my trailer bed is 50". The link below is the one I have. If I just stand them up on their side(with no J-cradles) I don't think they'd be very secure. At least the cradles keep them from sliding easily. http://www.farmandfleet.com/products/669952-teske-mfg-no-floor-trailer.html#.U8NPV2dOWUk Quote
B@ssCrzy Posted July 14, 2014 Posted July 14, 2014 Could it work? I am sure it could by just securing the yak with some ratchet straps to the trailer, but it does not seem very safe to me at all. Especially if you get into an accident situation or something where you have to stop quickly. You don't want that kayak flying towards the front into the back window. Those wall hangers are not built to withstand a lot of pressure they are just meant to have the yak resting on it. Quote
Team_Dougherty Posted July 14, 2014 Posted July 14, 2014 Edit to add. I reread the whole thread. You have thought of the "J" brackets. I never had someone steal mine. Knock on wood. even when left for 6 hours. How about something like this http://www.bassresource.com/bass-fishing-forums/topic/117449-kayak-trailer-modifications/ Using these, you should be able to get them on your trailer. http://www.amazon.com/TMS-KAYAK-RK-J-1BOX-Universal-Carrier/dp/B003V57NUQ/ref=wl_it_dp_o_pC_nS_nC?ie=UTF8&colid=1VVAF8GQHY0H2&coliid=I2HOXIY7TY818Q Here it is fully loaded Did a 300 mile round trip over the 4th weekend no issues what so ever. Quote
Jim Mac Posted July 15, 2014 Author Posted July 15, 2014 Thanks guys. Team_Dougherty, can those J-cradles from Amazon be bolted to a 2X4 which is lying flat? Or do they have to be mounted to a pipe or a bar? Quote
Team_Dougherty Posted July 16, 2014 Posted July 16, 2014 Thanks guys. Team_Dougherty, can those J-cradles from Amazon be bolted to a 2X4 which is lying flat? Or do they have to be mounted to a pipe or a bar? Yes look at post 22 on the thread I posted above. pabassr made a similar modification to his trailer. http://www.bassresource.com/bass-fishing-forums/topic/117449-kayak-trailer-modifications/?p=1293962 see post 25 for a close up http://www.bassresource.com/bass-fishing-forums/topic/117449-kayak-trailer-modifications/?p=1294243 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.