Jump to content

Recommended Posts

  • Super User
Posted

My fishing partner has most of his spinning rods with cork, as I do. However, he leaves the plastic sheathing on the cork instead of taking it off, as I do. He says it keeps the cork looking better for a longer time. I have My doubts about it being such a good practice, although I'm not sure why I feel that way. Opinions, please! :)

Posted

It may make them last a bit longer. But I buy my rods to use them and I like the feel of cork better than plastic. I can always clean the cork handle and keep it looking good.

  • Like 4
Posted

Seems like the plastic would make it hard to keep a good grip on the rod. Your friend might be interested in the U-40 cork sealer. I haven't used it yet, but I see a lot of guys say they really like it, keeps their cork clean.

  • Like 3
Posted

you might wanna take it off, i heard if any moisture get in-between the plastic and cork, the cork can't dry out so it basically rots and becomes very brittle. never experienced it but I've heard of it happening a few times

  • Super User
Posted

Plastic on cork rods is like plastic slip covers for furniture & car seats. That practice went out about fifty plus years ago. :laugh5:

  • Like 2
  • Super User
Posted

Seems like the plastic would make it hard to keep a good grip on the rod. Your friend might be interested in the U-40 cork sealer. I haven't used it yet, but I see a lot of guys say they really like it, keeps their cork clean.

 

I am a faithful U-40 cork sealer disciple.  Not on reel handle knobs but every rod handle I own. 

 

Make a difference in cork durability and longevity.

 

See no reason why it would not work for your application.

 

A-Jay

  • Super User
Posted

I have a friend that is clean crazy, so much that it is to the point of OCD and he does the same thing. The thing that cured him of it was a trip out during a damp fall day, he almost threw the rod out of the boat so he took off the plastic from the rear grip leaving the fore grip on, guess what? A month later the moisture in the plastic started causing the filler to come out of the cork and it looked a mess so he took the plastic off and cleaned it up and he no longer keeps it on.

Posted

I Did this for many years...because I'm pretty particular about stuff. I stopped about a year ago because I realized that life is too short And The Plastic Only Lasts A Year Or So And It's A Pretty Nominal Effect over The Life Of The rod. I have been super happy because I just learned that a magic eraser brings the cork back to brand new.

  • Like 1
Posted

My sons would leave the plastic on until they caught a fish "worth of the rod". Very seldom did the plastic last the first day. The U-40 sealer is a great way to go IMO. I use it on all my rods.

  • Like 2
Posted

call me crazy but I actually like a little wear on my cork handles, gives em that nice broken in look and feel.

  • Like 1
Posted

I'm Absolutely a cork handle guy... Sincerely no offense but leaving the plastic on the handle is insanely idiotic to me...

The reason why I'm a cork handle guy is cause I like the FEEL of it....not plastic..

Especially on a higher end rod with better quality cork... That would be like buying a really nice chef knife but only cut butter with it cause you don't want to do any damage to the blade........or maybe not..hahaha!

And I'm extremely anal about keeping Everything I own in really nice condition.

  • Like 1
  • Super User
Posted

I don't care if mine get dirty.  I like them a little darker anyway.   

  • Super User
Posted

It's an everyday sight down here, why I don't know, many keep the plastic straps on the combos.  I keep the plastic on the cork until I've decided I'm keeping the rod, I want to return a rod as clean as can.

Posted

you might wanna take it off, i heard if any moisture get in-between the plastic and cork, the cork can't dry out so it basically rots and becomes very brittle. never experienced it but I've heard of it happening a few times

My first thought was moisture possibilities and my second was I'm more concerned with how my rod feels in my hand then I am with how my cork looks.

Brian

  • Super User
Posted

I keep the plastic on the cork until I've decided I'm keeping the rod, I want to return a rod as clean as can.Snookalot said it....

After 30 days off comes the plastic...

  • Super User
Posted

Funny thing the higher end rods do not come with plastic sealed cork handles. I wonder why?  :Idontknow:

  • Like 1
  • Super User
Posted

My fishing partner has most of his spinning rods with cork, as I do. However, he leaves the plastic sheathing on the cork instead of taking it off, as I do. He says it keeps the cork looking better for a longer time. I have My doubts about it being such a good practice, although I'm not sure why I feel that way. Opinions, please! :)

Your partner is nuts!

  • Like 2
Posted

^^^ no sugar coating there... its a tool, use it to catch fish, if it gets scratched or dirty, just make sure you have some good stories and pictures to explain them...

 

Mitch

  • Like 1
Posted

Either the U-40 cork sealer, or if he actually doesn't like cork, then put some of the shrink-fit X-wrap flocked tubing on it. I have that on some of my salmon rods that spend their lives in rod holders. It's also great for color-coding your rods.

 

http://www.mudhole.com/Rod-Building/Cord-Grip-Tape-Shrink-Tubing/Flocked-Rubber-Shrink-Tube

 

http://www.mudhole.com/Rod-Building/Cord-Grip-Tape-Shrink-Tubing/Colored-Heat-Shrink-Grip-Material

  • Super User
Posted

My fishing partner has most of his spinning rods with cork, as I do. However, he leaves the plastic sheathing on the cork instead of taking it off, as I do. He says it keeps the cork looking better for a longer time. I have My doubts about it being such a good practice, although I'm not sure why I feel that way. Opinions, please! :)

 

Reminds me of my Italian in-laws. They kept the plastic on lamp shades!

 

Ridiculous.

  • Super User
Posted

I don't get keeping the plastic on, the rods are tools to catch fish. I pay good money for rods, I want them to perform at their best, having the plastic will make them slippery and not feel right. That is a no no, and especially not for something which is an easy clean up.

Posted

I keep it on till I decide if I like the rod or not. I usually try to make this decision in the yard before I hit water though.

  • Super User
Posted

Funny thing the higher end rods do not come with plastic sealed cork handles. I wonder why? :Idontknow:

Not as much cork filler to hold in?

  • Like 1
  • Super User
Posted

I keep it on till I decide if I like the rod or not. I usually try to make this decision in the yard before I hit water though.

It may feel fine casting in the yard, but no telling how the rod is going to react with a fish on.  I'd prefer catching a few fish before I made the decision. 

  • Super User
Posted

Thanks guys! You've re-inforced my exact perception. Now I just have to convince him to remove it from his rods! (Not an easy task!) LOL!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.


  • Outboard Engine

    fishing forum

    fishing tackle

    fishing

    fishing

    fishing

    bass fish

    fish for bass



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.