Jump to content

Recommended Posts

Posted

Darn! With that kind of budget there is no sense in me mentioning what I use for jigs. I'd be laughed off the forum. :cry4:

Don't worry about it man. The reason I have nicer stuff is because I'm not that good of an angler and I want as many advantages as I can lol. I wanna put what little factors I can in my favor. Jig fishing takes a crap ton of practice.

Case in point, the guy I take guided trips with in Virginia has old beaten down gear and only uses mono. We could fish in 30ft of water and he out fishes me by way too large an amount with what most people consider older, cheaper gear. Practice practice practice

  • Like 1
Posted

Jig rod for everything but grass - 7' H/XF Carbonlite, Revo Premier 6.4:1, 17lb Fluoro

 

Jig rod for grass (Punchin/Flippin) - 7'9" H/F St Croix Mojo, JM Sig 7.1:1, 65lb Braid

 

T-rig rod for everything but grass - 7' MH/F Carbonlite, PQ 7.1:1, 17lb Fluoro

 

T -rig rod for grass - 7'9" H/F St Croix Mojo, JM Sig 7.1:1, 65lb Braid

 

I spend all my big money on fly rods  :eyebrows:

Posted

I use a skeet Reese jig worm rod paired with a BPS Pro Qualifier 7.1:1 and spooled with 14# Berkley Vanish. It serves it's purpose but I am too a point where I am going to start upgrading to nicer stuff. I doubt I will catch anymore fish than I do now but it will definitely be more enjoyable to fish with!

  • Super User
Posted

Presently my 1/2 oz Jig & Craw is on the combo below:

 

ROD

Dobyns Champion 705C  [7' 0" - Mag Heavy - Fast - 3/8 to 1-1/2 oz - 12 to 25 lb]

 

REEL

Shimano Core - 101Mg    [Left-hand - 6.0 oz - 11 lb max drag]

 

Roger

Posted

My weapons: 

 

7'1" MHF *** - Daiwa T3 Ballistic - 20lb Seaguar Abriazx 

 

I have a 7'4" HF St. Croix Rage coming in. Plan is to pair it with my Daiwa Tatula - 65lb 832. I plan on using this as my frogging/punching rod. 

Posted

My setups:

1) Shimano Clarus 7' 2" MH/FLews tournament MGwith 15 lb invisx

2) shimano compre 7'2" M/XF Daiwa T3 B 12 lb invisx

3) shimano compre 7'2" MH/XF Abu promax 15 lb abrasx

4) st. croix triumph 7' M/F  quantum kinetic 12 lb invisx

5) st. croix mojo 8' flipping stick quantum kinetic 20 lb floro

6) gander mtn GSX tournament 7'6" MH/F daiwa tierra 50 lb PP

 

hoping to add a tatula combo before the season starts here up north...

 

Mitch 

  • Global Moderator
Posted

Finesse Jigs/t-rigs

7' 1" MH/XF LTB/200E7

jigs/pitching

7' 6" MH/F LTB/200E7

big jigs and t-rigs

7' 3" MH/F LTB/200E7

Posted

 There is one set up I don't go fishing with out. My 7'9" Xtra-Heavy Duckett White Ice with a Shimano Chronarch E and 65 pound power pro.

 

 I just bought a new set up and it is a 7'8" Xtra-Heavy Denali Kovert with a Shimano Citica G and also 65 pound power pro

 

 My last set up is for a little lighter pitching and it is a 7'3" Heavy Duckett White Ice with a Lew's Super duty.

 

 The Denali Kovert is a good rod but boy is it ever over matched by that White Ice.

Posted

Finesse Jigs/t-rigs

7' 1" MH/XF LTB/200E7

jigs/pitching

7' 6" MH/F LTB/200E7

big jigs and t-rigs

7' 3" MH/F LTB/200E7

I'm noticing a trend here...lol; liking the Legend Tournaments and Curados are we? My Legend Tournament teaser is one of my favorite rods...great for finesse applications and a great frog rod too.

Posted

I rarely fish a trig.  If i do its just with what I consider my jig rods.  I have 3.

 

7 1 mh legend elite

7 1 glx heavy

7 3 heavy glx

Posted

My main setup is a RodTech Custom Rod 7'3" MH/F with a Quantum Accurist 7.0:1 Burner

  • Super User
Posted

Well my "junk" as I stated before is:

Shimano curado 51E spooled with 20lb Power Pro braid, and a 12 or 15lb flouro leader on an Abu Garica 7' M Vendetta...........I use this for 3/16, 5/16, finesse jigs.

Abu Gen 2 Revo. STX, spooled with 30lb Power Pro, and a 15,17, or 20lb fluro leader on an Abu Garcia 7'6" MH Vendetta.........."GP" jig work with 3/8-3/4 oz. jigs

Abu Gen 1 Revo STX, spooled with 50lb Power Pro, and a 17, or 20lb flouro leader on an Abu Garcia 7'6" H Vendetta.............heavy cover, flipping and pitching jig work.

That's not junk! That's good stuff!!

Hootie

  • Super User
Posted

The NRX series rods are faster action than the GLX and about 1/2 power stronger; 3 power is about 3 1/2.

I would suggest that you touch and feel before buying.

The NRX are state of the art rods, the negative being price and warranty, the $100 wild card return sucks.

You might want to consider a custom built rod using a blank equal to NRX.

Tom

Posted

My favorite setup is a 7ft Falcon bucoo rod and a plueger purist 6:4:1 with 50 lb braid and 17 lb stren fluoro.

Posted

The NRX series rods are faster action than the GLX and about 1/2 power stronger; 3 power is about 3 1/2.

I would suggest that you touch and feel before buying.

The NRX are state of the art rods, the negative being price and warranty, the $100 wild card return sucks.

You might want to consider a custom built rod using a blank equal to NRX.

Tom

So your saying that my NRX 802 is closer to an 803 in GLX? kind of how St. Croix rods are more powerful than advertised.

  • Super User
Posted

The NRX series rods are faster action than the GLX and about 1/2 power stronger; 3 power is about 3 1/2.

I would suggest that you touch and feel before buying.

The NRX are state of the art rods, the negative being price and warranty, the $100 wild card return sucks.

You might want to consider a custom built rod using a blank equal to NRX.

Tom

 

What blank is comparable to the NRX?

Posted

What blank is comparable to the NRX?

The only one I could think of would be Gary's North Fork Composites HM, but that's just from reading not from experience.

Posted

Dobyns DX 784ML, Zillion 50th 7.3:1, 16# Toray Superhard Upgrade

Dobyns DX 784ML, Zillion SHLA 7.1:1, 16# Toray Superhard Upgrade  

Dobyns DX 743, Core 51MG 7.1:1, 14# Toray Superhard Upgrade 

  • Like 2
  • Super User
Posted

The only one I could think of would be Gary's North Fork Composites HM, but that's just from reading not from experience.

St. Croix has a very high performance blank as well though the name escapes me. The best perforning blank in the eyes of custom builders and custom rod junkies is the phenix K2's.

  • Super User
Posted

I think "catching" has very little to do with equipment, but it makes the other

99% of "fishing" more fun. That said, gear "might" compliment a fisherman's

skills, but whether that marginal difference is worth the price is a personal

matter.

 

If I fished with the same quality of gear I did 30 years ago, I would give up fishing...again...at least until I could retire and move to a place better suited for catching fish.  I can't afford top tier gear.  However, all my current gear is better than any I ever had before.  Nice gear is the only thing that keeps me going out and trying.  Although I spent more time on the water last year than since I was a teenager, I didn't go to "fish".  I went to try out new gear and to practice my casting.  This was enough to keep me happy.  The fact that a few really stupid fish were around the boat ramp and hit my lures was just icing on the cake.  :teeth3:

  • Global Moderator
Posted

I'm noticing a trend here...lol; liking the Legend Tournaments and Curados are we? My Legend Tournament teaser is one of my favorite rods...great for finesse applications and a great frog rod too.

There's several more LTB's and curado's in the lineup, but there's other rod and reels brands also. They're my favorite rod/reel combos overall that I've owned but if someone else offers something that I feel will do a specific job better then I'm not so brand loyal that I can't go with the better tool for the job :)

Posted

7'2" MH/F Skeet Reese Micro, PQ 6.3:1 with 15lb Invizx. This past year, this rod got a lot of use as I threw jigs most of the time. I am looking to upgrade within the next year.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.


  • Outboard Engine

    fishing forum

    fishing tackle

    fishing

    fishing

    fishing

    bass fish

    fish for bass



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.