DaveT63 Posted November 28, 2013 Posted November 28, 2013 I've been given permission by the wife to get one high end rod on Black Friday. I used to have a Loomis MBR843C GLX that I really liked, but sent it off on a trade for something I needed more. I really liked it, and now have a chance to replace it. The Dobyns will be within my allowed price limit Friday, and I've heard GREAT things about Dobyns rods. While I wouldn't get castrated for going over that limit to grab the GLX, I also wouldn't be getting any lovin' for a while. I am pretty much set on one of those two, although I MIGHT consider a St Croix Xtreme as well. But I am looking for feedback from anyone who has experience with both rods. Is the Dobyns equal to the GLX, or at least close enough to justify not dropping the extra cash? I understand everyone has different opinions, and there really isn't a right or wrong answer on this, but I'd like to hear thoughts from others. Thanks, Dave Quote
Super User kickerfish1 Posted November 28, 2013 Super User Posted November 28, 2013 Tell us what your intended use for the new rod will be. One can only assume but I would rather not. I am very familiar with DX703... have had mine for 3 years and the dobyns lineup as a whole. I have a few Loomis rods but not anything in the GLX series (IMX and NRX only). I wouldn't mine helping you but I would need more info. Also I assume you are looking at rods around 7 feet in legnth only? Quote
DaveT63 Posted November 28, 2013 Author Posted November 28, 2013 Tell us what your intended use for the new rod will be. One can only assume but I would rather not. I am very familiar with DX703... have had mine for 3 years and the dobyns lineup as a whole. I have a few Loomis rods but not anything in the GLX series (IMX and NRX only). I wouldn't mine helping you but I would need more info. Also I assume you are looking at rods around 7 feet in legnth only? Sorry, left some stuff out. Looking to use it for some light jigging and some heavier t-rigs, mostly. I prefer 7' rods because they fit in my truck better than longer rods, but I'm not averse to going to the 743C if the recommendations are strong enough. Thanks, Dave Quote
Craiger12 Posted November 28, 2013 Posted November 28, 2013 I recommend going with the DX743. Personally, I prefer full cork handles to split. Also, the added length only helps with hook sets and moving line easier. I completely understand if storage is an issue, otherwise I would go for the longer rod. I have a DX743 for senkos and light jigs/t-rigs, and I have a hard time when I switch from my DX 784ML bc of how short the DX743 feels. Quote
Trey Harpel Posted November 28, 2013 Posted November 28, 2013 What kind of weights are you looking at throwing? Heavier T rig means what? Quote
Grantman83 Posted November 28, 2013 Posted November 28, 2013 A heavier trig would mean the 704dx IMO. I use the 703 for light stuff and flukes...it's more a medium action than a mh Quote
Super User iabass8 Posted November 28, 2013 Super User Posted November 28, 2013 the technique you described as your intended uses would be best suited for the 704 , not the 703 . Quote
Super User South FLA Posted November 28, 2013 Super User Posted November 28, 2013 I have both, totally different rods. I would pick the GLX for your intended application. Also, although I love my Dobyns rods, I have to admit I have consistent issues with guide rings popping off and have had some rod failures. In all my years of owning Loomis rods I have had ONE issue with a rod breaking on setup. Nevertheless, Dobyns has a great warranty service and replaces my guides/rods quickly, but for those with a limited quiver of rods, you may want to consider failure rates. 1 Quote
Super User Dwight Hottle Posted November 28, 2013 Super User Posted November 28, 2013 Dave I would steer you towards the GLX because of the same issues mentioned by South FLA. Your other choice is the St Croix LegendXtreme LXC70MHF. 7' MH Fast 12-20 line wt 3/8 to 1oz lure wt. The croix exceeds the loomis (1/4 to 3/4) by lure weight if you want to use something a little heavier. I think you would be happy with either. I will tell you the croix black handles are very comfortable to use instead of cork. Quote
Super User kickerfish1 Posted November 28, 2013 Super User Posted November 28, 2013 Dave, You mention "light jigs" and "heavier t-rigs". Choosing the right rod will depend upon weights of both your jigs and Texas rigs plus plastic. Light jigs to me would typically mean 1/4 or 3/8 oz jigs unless we are talking finesse or hair jigs. Bigger Texas rigs I would think would be a 3/16-3/8 oz weight plus plastic. Depending upon the weights I think the DX703 would be fine. I routinely use mine for finesse jigs, hair jigs, and smaller brush jigs between 1/4 and 3/8 oz plus trailer. It casts and fishes these very well. The rod has also been used for its fair share of Texas rigs but again total weight not exceed about 3/8 oz or so. I tossed a 1/2 oz jig on it once and felt it was overpowered. If you think you will be using more jigs and Texas rigs from 3/8 to a 1/2 oz or more defidently step to a 4 powered rod or if you fish heavier cover. Way back when there wasn't nearly the shear number of rod manufacturers as there are today. Guys seeking the best cut their teeth on the Loomis IMX and GLX lines. For the longest time the GLX series was considered the gold standard to where all other rods were measured against. Today's GLX rods (new deep green version) seem to get overshadowed by the NRX line but from all accounts are still a great rod. Look for Rep sample glx rods that would be deeper discounted than your typical black Friday sales. These will include the wild card and full warranty support just like a new rod. You will pay more for a Loomis glx over the Dobyns dx rod. Both have loyal followings and are known to be great performing rods among their users. You will be happy with either brand. Quote
DaveT63 Posted November 28, 2013 Author Posted November 28, 2013 Thanks for all the input! I hadn't heard of the Dobyns issues mentioned above. Even if their CS is great, it still is down time without the rod. I have a Loomis 842c and a St Croix Extreme I use for 1/4 and 3/8 oz jigs and t-rigs, so was looking for something a little heavier. So now I'm thinking more about the St Croix Xtreme MHF. I just can't find a Black Friday deal as good as the Dobyns. Might have to keep an eye on the St Croix bargain room. Dave Quote
Super User Dwight Hottle Posted November 28, 2013 Super User Posted November 28, 2013 Sent You A PM Dave. Quote
Trey Harpel Posted November 28, 2013 Posted November 28, 2013 Don't need to worry about the Dobyns.. I've owned more then 50 of their rods and had TWO issues with them, both being my fault.. 735 tip guide and 805 guide I broke .. Other then that nothing and I fish 300 days a year and let others use my rods to try out.. Quote
Super User WRB Posted November 29, 2013 Super User Posted November 29, 2013 I would suggest considering a 4 power jig and worm rod in lieu of a 3 power. The G. Loomis GLX is in the $450 price range, the Dobyn's and St Croix are in $350 range, so it comes down to what you prefer, if a $100 isn't an issue. Tom Quote
DaveT63 Posted November 29, 2013 Author Posted November 29, 2013 All, thanks for all the input. Turns out I didn't even wait for Black Friday. I was offered a like new St Croix Xtreme 7'1" MHXF for about 40% off retail and decided to put the savings toward a reel for it. Thanks again! Dave Quote
baluga Posted November 29, 2013 Posted November 29, 2013 I got the DX703 and MBR 783 GLX. I prefer using the GLX. Quote
Brian Needham Posted November 30, 2013 Posted November 30, 2013 I got the DX703 and MBR 783 GLX. I prefer using the GLX. why? I don't like fore grips, so not a fan of loomis. Loomis makes a heck of a rod though, just not my bag. Quote
baluga Posted December 1, 2013 Posted December 1, 2013 why? I don't like fore grips, so not a fan of loomis. Loomis makes a heck of a rod though, just not my bag. The DX is heavier in total weight a tad more tip heavier than the GLX. The DX blank is fat, I guess that accounts for the extra weight. Quote
Brian Needham Posted December 2, 2013 Posted December 2, 2013 the extra weight is because the Dobyns is 6 inches LONGER. the 783, is only a 6'6, correct? 78 divided by 12 = 6.5.....unless I am reading the Loomis numbers wrong. where does the GLX balance at? all my DXs I have balanced are 1 inch in front of the reel seat, no expert but its hard to beat that. not trying to argue but want to make sure we going apples to apples......hard to do if the rod is indeed 6 inches shorter. Quote
baluga Posted December 2, 2013 Posted December 2, 2013 the extra weight is because the Dobyns is 6 inches LONGER. the 783, is only a 6'6, correct? 78 divided by 12 = 6.5.....unless I am reading the Loomis numbers wrong. where does the GLX balance at? all my DXs I have balanced are 1 inch in front of the reel seat, no expert but its hard to beat that. not trying to argue but want to make sure we going apples to apples......hard to do if the rod is indeed 6 inches shorter. you are making a wild guess..Here's the weights of 7' rods for both. MBR 843 GLX ---- 4.5 Oz DX703 ------------- 5.2 Oz I just like this one. A MBR 783 GLX ---- 4.0 Oz Quote
Brian Needham Posted December 2, 2013 Posted December 2, 2013 I wasn't making a wild guess for the fact you the compared the 783. That's what I was questioning. thanks for posting the numbers, so it stands it is indeed lighter. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.