KevO Posted October 10, 2013 Posted October 10, 2013 I bought a new curado 300e last night for swimbaits and A-rig. It has the 6.2:1 gear ratio, is it possible to switch that out for a slower ratio like 5.0:1 like the 200e or a 5.5:1 chronarch e? I just like a slower gear ratio for those applications. Quote
War Eagle 44 Posted October 10, 2013 Posted October 10, 2013 No, the 300 series has larger gears and therefore can not be switched with the gears from a 200. I use my 301E for all my A-Rig and big swimbait/swim jig duties and I love it. It isn't to fast at all in my opinion. I think after you fish it a few times you'll get acclimated to it and really like fishing with it as well. Even though it has a 6 ratio it is very powerful, no "stress" when fishing A-Rigs at all. Great reels. Quote
KevO Posted October 10, 2013 Author Posted October 10, 2013 It just feels pretty fast playing with it. It was just a thought, because all last winter I was catching 3 to 1 against my partner with the rig and the only difference in the setup and baits was I used a curado e5 and he threw it on a chronarch b 6.2:1. I'll play with it Saturday and see how I like it. Quote
Fishwhittler Posted October 10, 2013 Posted October 10, 2013 The 300 gears aren't much if any larger than the 200 gears. I've never tried swapping them, but it might be possible. Try swapping the gears between your reels; the worst that can happen is they don't fit. Quote
Super User tomustang Posted October 10, 2013 Super User Posted October 10, 2013 Slow your retrieve speed Quote
KevO Posted October 10, 2013 Author Posted October 10, 2013 Slow your retrieve speed Ha I wish it was that easy, but i'm always going too fast. That's why I like the slower gear ratio. Quote
Super User tomustang Posted October 10, 2013 Super User Posted October 10, 2013 Ha I wish it was that easy, but i'm always going too fast. That's why I like the slower gear ratio. You must have those kevin van dam hands then! Quote
War Eagle 44 Posted October 11, 2013 Posted October 11, 2013 The 300 gears aren't much if any larger than the 200 gears. I've never tried swapping them, but it might be possible. Try swapping the gears between your reels; the worst that can happen is they don't fit. There's quite a bit of difference actually, no sense in taking apart a brand new reel "just to see". Quote
Super User WRB Posted October 11, 2013 Super User Posted October 11, 2013 The 300E recovers 28" with 1 handle turn and being a large size spool compared the 200 the line recovery doesn't change much at 90' cast. This is a fast reel with a lot of power. If you can't control your cranking speed, the 300E isn't a good choice for you. Excellent reel for the application. Tom Quote
Fishwhittler Posted October 11, 2013 Posted October 11, 2013 There's quite a bit of difference actually, no sense in taking apart a brand new reel "just to see". Unless you're curious. And yes, the gears really are similar in size if not identical. The drag washers from a Citica 200D will swap directly into a Citica E, and the 200D is the same size as the Curado 300E. Quote
War Eagle 44 Posted October 11, 2013 Posted October 11, 2013 Unless you're curious. And yes, the gears really are similar in size if not identical. The drag washers from a Citica 200D will swap directly into a Citica E, and the 200D is the same size as the Curado 300E. Not a single thing in this post is even remotely correct. Very apparent you don't own or know ANYTHING about a 300 series Curado. Quote
KevO Posted October 11, 2013 Author Posted October 11, 2013 The 300E recovers 28" with 1 handle turn and being a large size spool compared the 200 the line recovery doesn't change much at 90' cast. This is a fast reel with a lot of power. If you can't control your cranking speed, the 300E isn't a good choice for you. Excellent reel for the application. Tom I'll see how I like it. It feels great on my dobyns ML795 swimbait rod. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.