Super User Ratherbfishing Posted January 4, 2013 Super User Posted January 4, 2013 I know just enough, sometimes, to be dangerous so please forgive any follow on questions in advance. I bought a used refridgerator. It runs fine (gets cold) but the water dispenser and ice maker are not getting water up to them. I checked the solonoids (1 for each function) for continuity and they appear to be fine. There is water pressure in the line leading to the connection but stops after that. I've checked for fuses and/or circuit breakers (none found) and I'm at a complete loss to identify what the problem is. Any help would be greatly appreciated. Quote
Super User slonezp Posted January 4, 2013 Super User Posted January 4, 2013 You've checked continuity, but have you checked for voltage? Quote
Super User flyfisher Posted January 4, 2013 Super User Posted January 4, 2013 or checked for a blocked or not installed filter. Quote
Super User K_Mac Posted January 4, 2013 Super User Posted January 4, 2013 We had very hard water in our last place, and lines and filters would clog quickly. Make sure the valve is physically opening and water passes through it, then check for flow down stream. Quote
Super User Nitrofreak Posted January 4, 2013 Super User Posted January 4, 2013 Just because it looks like it should work does not mean it will, even if you have voltage, continuity, the contacts in the relay may either be stuck or one of the contacts may be missing all together, the relay or relays may even click and sound as if they are working when in fact they are not. The passage the relays open may be clogged as well, there is a very small port that allows the water to pass through so don't forget to check that as well. Quote
Super User retiredbosn Posted January 4, 2013 Super User Posted January 4, 2013 I always look for the most simple problem first, like a clogged filter or water line. Most modern refrigerators have a filter that needs replaced every few months, these filters use activated charcoal or carbon, sometimes moving the fridge will damage the filter allowing the charcoal to clog the lines or the filter collapses and doesn't allow water flow Quote
Super User Ratherbfishing Posted January 7, 2013 Author Super User Posted January 7, 2013 Hey guys, Sorry it's taken so long to respond. And thanks for your responses. Unless they are very cleverly hidden, I see no filters of any kind whatsoever on this fridge. If one exists, where would it be (it's a kenmore fridge)? I suppose it could be minerals clogging the line somewhere but there is no evidence of any deposits anywhere. I've not checked for voltage yet. If it's not getting voltage, what next? Where is the relay switch on a Kenmore? Quote
Super User retiredbosn Posted January 7, 2013 Super User Posted January 7, 2013 Go to sears website and find the manual for your model. Without a schematic I couldn't begin to tell u where to find the relay Quote
Super User Fishing Rhino Posted January 7, 2013 Super User Posted January 7, 2013 I don't know about the relay switch, but the filter is usually seen from the outside below the door. You may need to remove the black plastic grille beneath the door, or it may have a circular opening in the grill which allows you to change the filter. It may look like this. Quote
Super User retiredbosn Posted January 8, 2013 Super User Posted January 8, 2013 They are sometimes located behind a white panel inside the door at the top. Quote
fish-fighting-illini Posted January 10, 2013 Posted January 10, 2013 Most refrigerators that I've seen have a schematic either on the back or on the inside panel. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.