BASSHUNTER1961 Posted October 25, 2012 Posted October 25, 2012 I'm thinking of building a homemade rod rack, and would like to see some of the ones some of you have made.... I'm interested in racks for the home or shop.... So..... let's see your rack! Quote
SmokeRise1 Posted October 25, 2012 Posted October 25, 2012 I haven't done it yet or seen it done, but a buddy told me about pretty cool idea that doesn't cost too much. You get 2 of those swimming pool noodles and mount them on the wall, one just above the floor and the other one up about 5 feet. The one mounted near the floor you drill 1 1/4 inch holes about 1 inch deep and 4 inches apart. This is where the butt ends of the rods slide in. Then in the noodle about 5 feet up you cut corresponding slits, directly above the holes you already drilled. This is where the tops of the rods slip in. It is probably easier to do the drilling and slit cutting before the noodles get mounted. I think the noodles are 5 feet long so you could get 14 rods in each with 2 inches left over on each end. Quote
BASSHUNTER1961 Posted October 25, 2012 Author Posted October 25, 2012 SmokeRise1, That is an interesting way to do it, I kinda like the idea. I wonder if there is a way to give the noodles a woodgrain look? Quote
B-Dozer Posted October 25, 2012 Posted October 25, 2012 SmokeRise1, That is an interesting way to do it, I kinda like the idea. I wonder if there is a way to give the noodles a woodgrain look? Ummm, use wood? 1 Quote
Super User Fishes in trees Posted October 25, 2012 Super User Posted October 25, 2012 I made one in my shop out of 1 1/2" schedule 40 plastic pipe and various fittings. It is a 3 level deal that holds the rods by the handle at slightly different angles out from the wall. It holds 30 rods now and I'm thinking of expansion. At no point was any measuring involved and all the pipe was cut using my sawzall. Just line stuff up by eye and cut away. It is a tribute to indigent caucasian engineering. I mounted it to the wall using 4" deck screws and 2x4 scraps. I wish I knew how to post pictures. Quote
Super User Alpster Posted October 25, 2012 Super User Posted October 25, 2012 The fist one is a wall rack for some fly rods. It's just a couple of coat racks turned sideways. This one took a little more doing but it works great and I love it. It has casters under it to roll it around. Ronnie Quote
PABASS Posted October 25, 2012 Posted October 25, 2012 I haven't done it yet or seen it done, but a buddy told me about pretty cool idea that doesn't cost too much. You get 2 of those swimming pool noodles and mount them on the wall, one just above the floor and the other one up about 5 feet. The one mounted near the floor you drill 1 1/4 inch holes about 1 inch deep and 4 inches apart. This is where the butt ends of the rods slide in. Then in the noodle about 5 feet up you cut corresponding slits, directly above the holes you already drilled. This is where the tops of the rods slip in. It is probably easier to do the drilling and slit cutting before the noodles get mounted. I think the noodles are 5 feet long so you could get 14 rods in each with 2 inches left over on each end. Now that's a great idea and I think I am going to use it, thanks for sharing! Quote
Super User rockchalk06 Posted October 26, 2012 Super User Posted October 26, 2012 I experimented with a few different styles etc and found the Berkley combo rack kinda worked the best. Quote
(='_'=) Posted October 26, 2012 Posted October 26, 2012 wont storing them horizontally (as in the flyfishing rods shown above) damage or permanently bend them?? i guess it would create a deformation over time... im thinking about building a rod/rifle rack... still looking for ideas... i guess wood is the way to go, but i dont really think wood would look good in my room... maybe PVC painted black?? if i ever do it, ill post up pics here... Quote
Super User Alpster Posted October 26, 2012 Super User Posted October 26, 2012 wont storing them horizontally (as in the flyfishing rods shown above) damage or permanently bend them?? i guess it would create a deformation over time... After 10-12 years with a couple of those rods and over 15 for one, my answer is nope, they are not bent or deformed in any discernable way. They are beautiful rods and I want to display them, I don't have any ceilings high enough to display 9'+ rods vertically. All these rods fish like the day I bought or built them. Ronnie 1 Quote
(='_'=) Posted October 26, 2012 Posted October 26, 2012 After 10-12 years with a couple of those rods and over 15 for one, my answer is nope, they are not bent or deformed in any discernable way. They are beautiful rods and I want to display them, I don't have any ceilings high enough to display 9'+ rods vertically. All these rods fish like the day I bought or built them. Ronnie thanx!! i was concerned because on my archery days, i wouldnt want to store my arrows like that for long periods of time... Quote
Super User retiredbosn Posted October 26, 2012 Super User Posted October 26, 2012 I made one once out of a portable clothes rack and plywood. Wouldn't show a picture of it even if I could. Redneck ingenuity at its finest, even left it on the casters so I could roll it around! Quote
Rich_F Posted October 27, 2012 Posted October 27, 2012 · Hidden by Glenn, February 3, 2013 - No Longer an Advertiser Hidden by Glenn, February 3, 2013 - No Longer an Advertiser Maybe give this a try... Rod Racks 50.00 plus shipping made from .125 5052 aluminum Black powder coat finish Each have 3 mounting holes and black screwcaps included Hold up to 14 rods and reels Custom sizes available http://i45.photobuck...es/Rodracks.jpg http://i45.photobuck...dracksinuse.jpg Let me know
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.