Fluorocarbon On Spinning Gear

[JunkYard814]

I'm trying to build a new set-up for finesse fishing with soft plastics. I want to line it 8lb fluoro. I'd like to use a spinning reel, but I've been hearing mixed stories about putting fluorocarbon on spinning set-ups. The real will most likely be something like a Pflueger Arbor in the second to smallest size. What I want to know is will a small reel like this be able to handle fluorcarbon? Any tips you guys have regarding spinning reels and fluorocarbon line I would love to hear.

[nickw234]

I'd give Yo-Zuri hybrid a try. I use it on my spinning gear and I like it a lot better because of the lack of memory it has compared to fluorocarbon.

[00 mod]

I'd give Yo-Zuri hybrid a try. I use it on my spinning gear and I like it a lot better because of the lack of memory it has compared to fluorocarbon.

x2! And also ALWAYS use KVD line and lure conditioner to help even more!

Jeff

[Chris at Tech]

Seaguar Invisx in 8lb test.

If you don't like that brand, then I'd simply recommend you pick your desired brand but do not go above 0.009mm on the line diameter. For instance, Berkley 100% fluoro in 8lb is 0.011mm whereas the Seaguar is 0.009mm. What does that translate to? A line that's easier to manage on spinning gear.

I would also recommend KVD line and lure conditioner

[SirSnookalot]

For a smaller spinning reel thinner line manages best, that's one reason why I use braid with a leader. I don't dispute this for a second, many members have said that using straight braid with no leader works great for them, I kinda question the need for FC lines. I have never been too concerned over line or rod sensitivity.

[NitroZ9]

I would recommend using braid with a flouro. leader. The braid eliminates the problems with line twist and other manageability problems you encounter with any type of line used on spinning reels. I fish a lot of finesse and use this combo. on both shakey head and dropshot. I would never use straight braid in the clear waters I fish. Flouro. is almost invisible under water and there is no braid that is even close. As has already been said, using KVD Line & Lure will also help keep your line manageable. Put it on prior to fishing so it has time to dry for maximum results.

[james 14]

Another vote for braid with a flouro leader. An alberto knot will be as strong or stronger than the knot to your lure so there shouldn't be any concern over having another knot to fail.

[Chris at Tech]

After a year or so of using straight fluoro for my finesse fishing, lately I've been alternating between my 2 spinning setups lately. One has straight Seaguar and one has 10lb Suffix with an 8lb fluoro leader.

To the comments above -- the posts are absolutely on the money that light braid is easier to handle than straight fluoro (MUCH easier when compared to 8lb Berkley 100% fluoro, and just a bit easier than Seaguar). Personally, I still think that I feel bites better on straight fluoro, but I'm slowly reacclimating to braid too. Both solutions are VERY sensitive, I just prefer fluoro a bit more at this point.

[BrianinMD]

Recently switched to Invisx 8lb on one of my spinning setups, I use KVD L&L the night before and have been extremely happen with it.

My other spinning setups have Yozuri, can't go wrong there at all. The thing that annoys me with braid/leader is having to tie the extra knot.

[JunkYard814]

Thanks for the replies! I considered using braid with a fluoro leader, but I don't trust my knot tying when connecting lines, and I also don't like having the knot traveling up the guides on my rod.

[Busy]

Seaguar Invisx in 8lb test.

If you don't like that brand, then I'd simply recommend you pick your desired brand but do not go above 0.009mm on the line diameter. For instance, Berkley 100% fluoro in 8lb is 0.011mm whereas the Seaguar is 0.009mm. What does that translate to? A line that's easier to manage on spinning gear.

I would also recommend KVD line and lure conditioner

Thank you for posting the sweet spot on flouro for spinning reels. I put 14# on a spinning reel a few years to try out the flouro that everyone was talking about and was disgusted. It literally flew off the reel everytime the bail was opened. I just went back to using mono and braid. Might have to give it another try.

[SirSnookalot]

Thanks for the replies! I considered using braid with a fluoro leader, but I don't trust my knot tying when connecting lines, and I also don't like having the knot traveling up the guides on my rod.

Attaching your leader via knot and running it thru the guides is not mandatory. I only tie line to leader when target certain species like spanish mackerel and cero mackerel, I attach my leaders using a swivel.

[bassin is addicting]

i use Yozuri Ultra soft in either 6 or 8lb on my smaller size spinning reels and love it...higher breaking strength and very durable. i also use KVD line conditioner....it DOES work..

[hmongkidBee]

if you want a great flourocarbon line, and I do stand behind it. Go check out Sunline FC Sniper. This line is soft and supple like seaguar invizx but more sensitive. Casts EXTREMELY well to the point where it's almost scary on spinning gear. The line doesn't have too much memory but then again, KVD line and lure conditioner will fix this issue if it ever arises. I use 5lb for all of my spinning gear needs and this line has held up exceptionally well. There are more sensitive flourocarbon lines out there, but in the case of spinning gear, this is by far the BEST line that I've used to date.

[BassinMD]

if you want a great flourocarbon line, and I do stand behind it. Go check out Sunline FC Sniper. This line is soft and supple like seaguar invizx but more sensitive. Casts EXTREMELY well to the point where it's almost scary on spinning gear. The line doesn't have too much memory but then again, KVD line and lure conditioner will fix this issue if it ever arises. I use 5lb for all of my spinning gear needs and this line has held up exceptionally well. There are more sensitive flourocarbon lines out there, but in the case of spinning gear, this is by far the BEST line that I've used to date.

Sniper is the best light line flouro on the market IMO. It handles great and is very low stretch for how soft it is. I use the 7lb on both of my spinning rods.

[pondassasin]

Another braid to fluoro vote. I use 20# Sufix 832 with #10 Sunline Sniper joined with an Alberto knot and if I break off at the hook or leader it's because I've been snagged and I have to put some oomph into it to break it free. Superb castability, sensitivity, and stealth.

[traindog71]

I use 6lb Seaguar Invisx on Shimano 1000 series, no issues at all as long as I don't spool on too much, usually about 80-100 yards works great. I wade fish and throw finess baits 100's of times per trip.

[B@ssCrzy]

Another vote for braid with a flouro leader. An alberto knot will be as strong or stronger than the knot to your lure so there shouldn't be any concern over having another knot to fail.

x2...Although I would add that I use a mono leader just b/c I am too cheap at this point to pony up the extra $15 for fluoro and the fact that mono is a little more forgiving. 15lb PP has made my spinning reels enjoyable once again.

[Clint C.]

I use 6lb Sunline Super FC Sniper on my Pflueger Patriarch (9530). I think you'll be just fine with the 8lb on the reel you're looking at. Honestly though, this sunline stuff is very hard to break. You may not need more than 6lb.

Don't over fill the reel and spray KVD line conditioner on it 45 minutes before you fish and you're set!