Jump to content

Recommended Posts

  • Super User
Posted

So I finally got to go striper fishing again today. I love catching these fish. Talk about a rush and a fight. I think I have found a new species to target now. Heres a pic of the smaller of my four fish from tonight. My phone battery died right after I got this picture, so this was the only photo I got.

post-30345-0-67737300-1336804864_thumb.j

  • Like 1
  • Super User
Posted

NICE! iv still yet to catch a striper its on my todo list when I get home

  • Super User
Posted

Well I am bank fisherman so maybe thats a problem.

Honestly once you know what to look for and get a understanding of where they travel and hang out at. You can easily catch them off the bank.

  • Super User
Posted

Learning how to catch them is easy. Finding them is another story.

Very true. Fortunately the two guys I've been going with have been doing this for a long time. They are teaching me how and where to locate and find them.

  • Super User
Posted

It's a 5600 C4 I believe, not quite sure off the top of my head. As for the stripers. I know they're in both Lay and Logan Martin Lakes. We were catching them below the Logan Martin dam, in lay lake, a few weeks back. They like the side creeks too. I believe they are also in Mitchell below the Lay lake dam. I'm not quite sure how far South in the Coosa they are, but I know they are in those three lakes for sure. Also they are in Lake Martin on the Tallapoosa River, as well as beliw the Lake Martin Dam.

Posted

I live in Montgomery,AL. I have a Abu 4600C3 and a Abu 6500C3. We have the Robert F Henry Lock & Dam on the Alabama River and the Jordan Dam on the Coosa River.

  • Super User
Posted

I live in Montgomery,AL. I have a Abu 4600C3 and a Abu 6500C3. We have the Robert F Henry Lock & Dam on the Alabama River and the Jordan Dam on the Coosa River.

I like the round Abu Garcia reels. They are some strong and durable little reels. I would imagine you should be able to catch them at the base of both dams. We were catching them a few weeks back at the base of Logan Martin dam. Try throwing a white fluke on a white jig head. Everyone out there was nailing them on those. Especially when they are running water outta the dam.

Posted

I was think about using live shad or shiner minnows. I use the Abu 4600C3 for Bass and the Abu 6500C3 for Cats.

  • Super User
Posted

If your fishing below the dam when they are pulling water your gonna have a rough time with the live bait. If they aren't pulling water the live bait will work amazingly. If your fishing creeks in the creeks, the live bait is also the way to go. Either reel will work good for ya. Just put some 20 to 25lb test line on them.

  • Super User
Posted

I used a 7ft mh veritas all the Times I've been. I have a couple of different rods for trolling though. My buddy is using a ugly stick and a Johnny Morris rod of some type. Eventually I'll get some rods more geared towards striper fishing. I just figure as long as I'm using a net and not trying to lift them with the rod, my less expensive bass rods are fine.

  • Super User
Posted

Homie cheap rods work as well as highend rods for catching these fish. I actually kindof prefer them. Then if one breaks on a stripe I'm not out 200 or more dollars.

  • Like 3
Posted

I have seen a lot of expensive rods meet their demise on a striper. I use Ugly Sticks on them. I have one 6'6" MH Ugly Stick Lite and a 7'6" ML inshore popping rod just for them. If one of them breaks, I'll be surprised, but not broke.

  • Super User
Posted

I have seen a lot of expensive rods meet their demise on a striper. I use Ugly Sticks on them. I have one 6'6" MH Ugly Stick Lite and a 7'6" ML inshore popping rod just for them. If one of them breaks, I'll be surprised, but not broke.

Ugly sticks are most likely what I'm about to go and get for them. I'm just not seeing the need for graphite with these fish. Glass just seems like the way to go.

  • Like 1
Posted

Ugly sticks are most likely what I'm about to go and get for them. I'm just not seeing the need for graphite with these fish. Glass just seems like the way to go.

Sometimes, you get the urge to use a more lightweight setup, that is usually cured by a 20+ crushing your jig 15 ft. from you and going straight under the boat.

Posted

Just started fishing for some stripers in my neck of the woods. It's a bast.

I have an 8ft Penn Fierce (rod and reel combo) from the Bass Pro down the road and it didn't cost me an arm and a leg and handles them fine. I have 20lb test Yo-Zuri Hybrid line.

Good for the price.

  • Super User
Posted

Just started fishing for some stripers in my neck of the woods. It's a bast.

I have an 8ft Penn Fierce (rod and reel combo) from the Bass Pro down the road and it didn't cost me an arm and a leg and handles them fine. I have 20lb test Yo-Zuri Hybrid line.

Good for the price.

That ain't a bad setup. I think I'm gonna have to check one at tomorrow after work.

Posted

Yes, a cheap stout rod is preferred! One reason, it vary well may break, two, you for sure do not need an ultra sensative rod to feel a bite, most of the time lucky to hang on to the rod! Fishing for these makes me wonder why i fish lmb as often as i do.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.


  • Outboard Engine

    fishing forum

    fishing tackle

    fishing

    fishing

    fishing

    bass fish

    fish for bass



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.