NHfroggin

-Thanks for the help guys. Im not going to try and fix the motor because i would have to pay for the motor and then get it fixed, if its possible. Right now im looking into motors on craigslist. Im definitely going to buy a compression tester to bring when i go look at them. -What do you guys think about a new motor, should i stay at 90hp go higher to a 100-115? or go lower and find a newer 70hp? -the boat (15' 5" Cajun) with the 90hp would go 45mph with two people and a full load. Any input would be great, Thanks

I was having trouble getting it in neutral so i brought it to the shop. They did a compression check on it before they re-installed the lower unit and cylinder three was bad, compression was at 105. im glad i didn't pay for the motor yet, and i guess its back to searching for a new motor. Thanks for all the help -matt

thanks for the quick replies @fishingrhino i will try that tomorrow. @gotfishyfingers it is when the motor is out of the water. It doesnt sound like the normal clicks its very loud and distinct. I found this youtube video and this is exactly what it sounds like. Also the throttle cables are the only things not connected right now, im not exactly sure how to attach them to the motor. thanks -matt-

-Hey guys sorry i never responded, a college graduation, deaths in the family, and a couple 80 hour weeks will put the motor lower on the priority list. -I ended up bringing the motor to the shop and there were a list of problems including bad compression and the carbs needed to be cleaned. It was going to be close to $1000 for all the fixes. I ended up buying a 1988 mercury 90hp off a guy i work with for $600. The only problem was it did not have power tilt/trim. We decided to take the power head off my motor and replace it with the newer. Everything went well except now when the propeller is rotated clockwise it clicks 5-6 times per rotation. im not sure if we did something wrong but my guess would be the shaft is misaligned or something? any input would be greatly appreciated! thanks -matt-

Thanks guys, i took it out today and had someone squeeze the primer bulb to act as the fuel pump and there was no difference. I was also told to hit the choke while its running to see if that helps although i didnt try it yet. I talked to the marina and they said the carbs probably need to be cleaned(450$). Looking at the SELOC repair manual it looks like an extensive job, has anyone done this themselves? or do you recomend having the mechanics do it? thanks for the help -matt-

@nice_bass im not sure what it would sound like if it wasnt running on all cylinders but it seems to be fine, thanks for the reply. @ fishing Rhino i was aware of the problems last year however i didnt have the funds to have it looked at. There was about a gallon of gas from last season and i added six gallons of gas before i went out. If by treat your fuel your referring to a seafoam type additive i always include it in my fill ups. I did not run the motor completley out of fuel last season because i read that it was not good for the engine? this may not be correct. I am no expert on motors so im sorry if im not 100% clear. Would you begin with cleaning the carbs? Thanks for the reply -matt-

I have a 77' mercury 90 hp, last year i felt a big power loss the last couple times i went out. It wouldnt get up on plane as fast and i lost about 10mph. This year it wont even start without giving it throttle then stalls when i try and go to idle or put it in gear. i was able to get it into gear a couple times and it only reved till 1800 rmp's and i was only at 6mph. That was at 3/4 throttle any more throttle and it would stall. It will rev normally in neutral. Im not sure wich direction i should be headed any tips would be greatly appreciated. If you need anymore information just ask! Thanks -Matt-

Hey Wagn nice to see you back on here, I got out early this morning before work. I could see them cruising the shallows less than 8" of water but they weren't biting. I caught a couple pickerel but no bass, a kayaker had a fish finder that said water temps were 58 but it felt colder. -matt

Hey Spencer give northern bass supply a call. There in Brentwood NH, the people their are friendly and very involved in NH clubs. I know they run a tournament schedule but their are other clubs like bubba Bassin. It all depends on what your looking for. Good luck -matt

Nice fish shane and Nashua. Its about that time to take the boat out, just out of curiosity does anyone know the water temps they've been fishing lately?

Bass Crazy, Kingston Lake is open there was a boat out their today. -matt

I was given a 15hp gamefisher motor and was told all it needs is a new carburetor. I dont know the year of the motor but here is the model number: 225581494 Serial number: 1174. Any information on this motor would be extremely helpful. Thanks -matt-

hey kevin, be careful launching i dont think you can touch the water because its a drinking supply, i could be wrong. The boat launch gets full quick so getting there early might be a good idea. Good luck let us know how it goes! Nice rig Klubba, how did you do at Kingston Lake, I didn't get out till Sunday morning but only managed a few small ones. -matt-

Its right next to the public launch. The area is sectioned off with posts connected by chains one of them has a lock on it. I might end up there around 12 now as I at have to work in the morning. -matt-

Long pond in danville is good and usually not as busy but it only parks 2-3. On the weekends there is greenwood pond also in Kingston but idk if there cool with people putting boats in there i just use my canoe. if you are a Kingston resident i believe you can get a key for the resident boat launch on Kingston lake and there's always room in that. -matt-