Jump to content

Ben Eipert

Members
 View Profile  See their activity

  • Posts

    111

  • Joined

  • Last visited

 Content Type 

Everything posted by Ben Eipert

  1. Ben Eipert
    I have not tried surgical tubing but I have found that hot glue works well. I heat up the foot and run it across the glue stick. Just stick and when you are done wrapping adjust as needed.
  2. Ben Eipert
    I highly recommend Zoom Speed Worms in Junebug Red
  3. Ben Eipert
    Build them! You will never want to buy a store bought rod again. The quality you can get for the price is crazy good.
  4. Ben Eipert
    Masking tape will make your life a whole lot easier. Get the half inch and trim as needed.
  5. Ben Eipert
    You should not have any trouble getting a rod made in that time frame. You will probably end up re-wrapping it multiple times though. I think I redid mine 3 times on my first one. Feel free to contact me also at beneipert@gmail.com. I might not be as much help as DVT but I can throw in my two cents and I was in the same situation as you with not much time or tools when I first started. Just be warned you will never want to fish a store bought rod again once you start building.
  6. Ben Eipert
    I believe Barlowes offers them with a skirt collar both painted and unpainted
  7. Ben Eipert
    I am in Berea just south of Richmond
  8. Ben Eipert
    Alright thanks everyone I am gonna give these a shot.
  9. Ben Eipert
    What color spooks would you guys recommend. I only have two of the clear puppy spooks now
  10. Ben Eipert
    http://www.lurecraft.com/Plastic-Mold-056/productinfo/5X056/ I have had great success with molds from here. This one looks close. It took me a couple tries to get where my pours were fishable also
  11. Ben Eipert
    Thanks all. Also when I mean I see them busting shad I mean I sea one or two shad jump out of the water then a splash. Does all that still apply even though they are not ¨schooling¨ for lack of a better word?
  12. Ben Eipert
    Sport Fish of Freshwater is easily the winner. It is by Vic Dunaway
  13. Ben Eipert
    Thanks for the help! I will give it a shot this weekend. I will let you guys know how I do.
  14. Ben Eipert
    You might just not be able to get enough pressure on the plastic to push it through. I would coat the mold with a hard smooth finish like epoxy or fiberglass and make sure it is a REALLY thin coat. It shoul help slide the plastic along and give you the option to lubricate it with some kind of oil to help it get in there. Canola oil works fine. If none of that works just make an open pour mold. Those are fool-proof and are way quicker to make. That little hump at the top isn't worth the effort. The fish don't care about the fine details as much as we do. You can also alter molds more that way. I highly recommend adding a tiny little paddle or ball at the end of it. That little tail moves just a little bit more and drives them crazy
  15. Ben Eipert
    That makes sense because the tubes I use are smoke colored about the same size as the alewives down here. I was catching them around noon when they were running them along the banks. Just so I am getting this straight fish brush, rock piles, docks etc. early and then fish structure like points and dropoffs later in the day.
  16. Ben Eipert
    The wonderful tube
  17. Ben Eipert
    Tail to belly would not. On the belly to tail it sounds like it isn't vented enough or the plastic is not hot enough. Try running a small file or razor blade and making a groove across the tail and going straight down the bait.
  18. Ben Eipert
    I mainly fish finesse tubes off of rocky/clay points, rock banks with drop offs, and bluffs. I also throw jigs there. I just do not have much confidence in anything else. I occasionally crank a DD22 and grind it into the bottom. Paddle tail worms on a round head jig and shakey head worms get used sometimes also.
  19. Ben Eipert
    The small fry or super fry molds from Do-It are spot on. Actually any of the fry series.
  20. Ben Eipert
    Ok. Also when I was catching them they were running shad or fry along the banks. The bass have been off the beds for a while bu the bluegill have just finished up.
  21. Ben Eipert
    I fish Norris down in TN which is more of a really deep river than a lake. It has no current and really clear water. Most of the time I can catch them on tubes or jigs but recently I have started having trouble. Three weeks ago the fishing was killer and I could catch them all day long but now no luck. This is mainly a shad lake and I can see them busting shad off of points but I cannot catch them. The depth where the fish are now is around thirty foot and both lm and sm are long and skinny. Any ideas?
  22. Ben Eipert
    If you could email me at beneipert@gmail.com we should be able to work something out. I cannot get the Private messages to work on here,
  23. Ben Eipert
    Zoom Big Salty Chunk or Super Chunk Junior. I also have started using a paddle tail worm and some cfraws I hand pour. The paddle tail worms have been killer
  24. Ben Eipert
    My leatherman always stays on my boat. Scissors, pliers, knife, screwdriver- all I need for just about any emergency. I have had to use it to take apart trolling motors on the water. Very handy
  25. Ben Eipert
    I would put 6 or 8 on the 7'6 and use it for shakey and wacky worms, the 6'6 would be good with a little heavier line like 8 or 10 for a wackyy worm or even a texas rig. I have a 7'6 rod and I use it for all my finesse baits.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.