QUAKEnSHAKE

Im hoping to go out tomorrow Ill try to compare the reels with those settings. I run abec7 in my core but will put stocks back in. Ive been tossing small 3/16oz rated spinnerbaits with ci4 would you like me to try this spinnerbait on my core, do you throw that light? The actual total weight is .344oz so a little over 1/4oz. The only catch is I have 20# 832 braid on the ci4 and 12# fluoro on core so line a bit different. I can say the CI4 easily handles this spinnerbait with 1 brake on & 3 on the dial. I mean this politely, get out and practice the 50E with less brakes. It will really open-up and show you what its got. You can cast the same distance with less effort if thats what you chose or with one brake and having that thumb trained distance will improve dramatically. Practice practice practice.

I have all 3 ci4 50e core50 what are your brake settings on the 50e & ci4?

I have Avid spinning 8' ML moderate 2pc rod its been excellent. Solid connection never a worry about it.

I dont know the "correct" way,scanned the manual doesnt say, but I have mine to the rim. Im not having any control issue or bad line management all is good. Half seems way too little. Even at 1/8 Id still try to go 1/16 at least. If youre pleased with it as is stay that way I guess.

Well I have much more use on both reels BB1 Pro and CI4 the CI4 is a beast at casting. It will outcast the Pro from 1/8 to 3/4 thats the range I cast. Throwing 1/2oz lipless cranks CI4 eats the Pro in distance & spool control. The CI4 manages the line on to the spool better as well. I use 20# 832 on both and the BB1 Pro doesnt space the line as nicely as the CI4. I get dig in and so when casting the pro set on 2 not a good thing. I have the CI4 set 1-3 and the line doesnt dig and lure just flies without hiccups. Throwing small spinner baits 3/16 size the CI4 shines over the pro. Durability issues showing on bb1 pro none on ci4. CI4 flawless so far but the pro has 3 issues. One knobs peeling. Two the levelwind is way too loose and actually feel it wobble on a cast. Third the brakes are starting to squeal like an eeeeeeeeeeeeeeeeeeeeee sound while casting. I set the dial to free and squeal goes away or set it higher to like 6 on up no squeal. Where I like it to be on 2 is when i get the noise. Dont know if I got a bad brake block or not. Think the BB1 Pro is going back.

Others have commented on the casting of the M/F I'll go into the retrieve of the M/F with jig. I went out and tried my 7'1" M/F *** with a 3/8 Jackall spade jig w/rage tail baby craw on it. It for sure loads well on cast but with this it loads just as much when retrieving. For me the tip was not strong enough to work jig efficiently through the weeds. The tip would load too much meaning I have to pull more to get the jig moving. So instead of popping the lure free it seemed more of a yank. This was with 20# braid on as well so the no stretch show the weakness in the rod. If you plan to use a stretchy line like fluoro or mono it would be even worse. So with braid M/F I would say is borderline, with fluoro no go get MH/F. No harm was done to any fish during the testing for this review

832 isnt as limp out of the box as other braids so give it some time to loosen up and then it starts casting better. Also the coating at least on mine was a bit much so what I notice was the line slightly sticking to itself. One might think its digging-in but it not just sticking. I have 20# 832 on a Chronarch CI4 and throwing a 3/16 booyah pond magic spinnerbait 35+ yards.

The thing is George & Fred can still speak their ways but Archie isnt allowed to.

I use through the eye twice 6-7 turn uni knot.

Ha I just walked in from outside put 12# Sniper FC back on my Core50. Wasnt anamored, as others seem to be, with FC towards end of last year but willing to have at it again. I didnt have break-offs though my gripe is the stretch(lots) and extra effort involved working bottom presentations through weeds.

Never really use them to target panfish. I did by chance get my PB crappie with a 1/2 RES chrome blue

Rapala Rippin rap 1/2oz chrome blue

With all the wind in my area a spinnerbait has been the most effective.

I use Airhead AHP-12HP for my 124SMB works very well. Has a pressure relief (the red thing connected to hose) that lets air out after 1.4psi is achieved but without it will pump to 2.5psi. I think the SE need only .75psi but not 100% that is the amount needed. Oh its loud .

Tatula for sure at the price they can be had .Put the $70 or so saved on a rod or very good line.

Here you go for Sebile general lures http://www.overstockbait.com/SearchResults.asp?Search=sebile&Search.x=11&Search.y=9 And specifically the Flat Shad 77 SU http://www.overstockbait.com/Sebile-Flatt-Shad-077-Suspending-p/fs-gl-no-077-su.htm

I see you haven't read the PM yet, I sent you a site with those lures and they are on sale.

I sent you PM

Well they got $350 out of me all together but saved big over regular prices.

X2 on these all great baits too Keitech Salty Core tubes For good sale on Palm Trees check my thread here: http://www.bassresource.com/bass-fishing-forums/topic/135898-kinami-palm-trees-a-k-a-fat-ika-good-deal/

Overstock bait having a $1.99 sale on certain items and Kinami brand is one of them. They have the Flash(senko) and Palm Trees (fat ika) & others. I placed another order for 40 packs so Im letting the cat out of the bag for those that want a good deal on very good baits. Also Rage thumper, lizard, hawg, shads. http://www.overstockbait.com/Kinami-Palm-Tree-p/k92f-05.htm

With the better manageability of braid you could back off the brakes and or spool tension til you start to lose control this may aid in getting more distance.

I got out and it was finally not as windy as it has been til the rain started. I went with wacky senko and got this 17" 2-1/2 # bass. Caught a few other dinks and looks like the bluegills are out in force.

Kinami Palm Tree watermelon chartreuse. They are now discontinued so grabbed 80 packages of them while on sale.

Welcome to the club of swoor- shoddy workmanship on omen rod. I had the same issue with poorly glued crooked twisted tip guide. Took mine back for exchange, week later went back to store they put it back on rack full price