Jump to content

OnthePotomac

Members
  • Posts

    2,273
  • Joined

  • Last visited

Everything posted by OnthePotomac

  1. Great articles. Thanks much. Debarbing sure makes it easier to remove the deep hooks.
  2. Glenn, I agree with you 100%. As I stated above, since I started debarbing hooks and using a hook remover, the days of trying to remove a hook otherwise ended. By a hook remover, I am referring the device Bill Dance is always using, although several companies make the same thing. I have to repeat for the disbelievers in fishing with the barb removed. I have lost zero bass because I do.
  3. With regard to the comments on this subject on the forum, I strongly recommend reading this article by Dr. Manns. There is a lot of bad information on what to do with a deep hooked bass. Personally, I debarb my hooks and use a hook remover. Very easy and I do not lose bass by debarbing. Hooks In or Out? by Ralph Manns Getting the word out on hook removal. Those of us who try to share the findings of scientific study with non-scientists are often frustrated. It seems very difficult to get the word out. We write about some important discovery, but find anglers, particularly the influential professional bass anglers, either don't read the new information or dismiss the new scientific insights because they conflict with beliefs the anglers already hold. Professional and TV anglers aren't the only ones to be slow in learning and applying the latest "word" from scientists. Biologists, particularly state fisheries workers are too busy with their own assigned tasks to read all of the literature produced by other scientists. They continue to advise anglers to handle fish using outmoded procedures. The recommendation that anglers cut the leader close to the hook when bass are "deep-hooked" is a good example. It is hard to find a publication on catch-and-release (C&R) techniques that doesn't pass on this poor advice. Yet, recent research on release techniques strongly suggests there is a better way. Some years ago, Doug Hannon noted that most magazine articles and state publications recommend leaving hooks in bass and other fish to "rust" out. He claimed that hooks don't rust fast enough, even in salt water; and suggested that the shank of a hook pointing up the throat of a bass acts like a lever or trap door that prevents swallowing. Bass can die of starvation while waiting for normal body processes to eject the hook. Food coming down a bass' throat will bypass a hook-shank, IF the shank lies tightly against the side of the throat where the barb is lodged. However, if the shank protrudes into the throat, food coming down can push the shank across the esophagus, blocking it. Deep-hooked bass may even feel pain as the food rotates the barb and regurgitate the food. Recently, Hannon's observations have been scientifically verified. John Foster, Recreational Fisheries Coordinator for the Maryland Department of Natural Resources, studied striped bass at Chesapeake Bay. His researchers held throat-hooked stripers between 16- and 28-inches long for observation in half-strength seawater so that hooks had ample opportunity to rust away. Size 1/0 and 2/0 stainless steel, bronzed, nickel, tin and tin-cadmium hooks were hooked in the top of each fish's esophagus, with an 18-inch length of line connected to the hook. After four months, 78 percent of the hooks were still imbedded. Cadmium coated hooks poisoned 20 percent of the fish, and production of these hooks has been stopped. Bronzed hooks were less likely (70%) to be retained than tin-cadmium (80%), nickel (83%), or stainless steel (100%) hooks. In a second test, the line was clipped at the eye of the hook, as advised by most existing C&R guides. One-hundred percent of the stainless hooks were again retained, while 56 percent of tin, 76 percent of bronze, 84 percent of tin-cadmium, and 88 percent of nickel hooks remained. Fish mortality was greater when all line was trimmed. Foster theorized that the lengths of line hanging from a fish's mouth kept the hook-shank flat against the side of the esophagus and allowed food to pass. Without the line, food could move the hook and close the throat. Hooks rusted slowly in stages, and the bend and barb became smaller very gradually. Stripers formed scar tissue around imbedded hook points, a typical reaction of body tissue to foreign matter. Foster noted, however, that once the tough scar tissue formed, hooks became more, not less, difficult to remove. Months after fish were hooked, infections sometimes developed around points, causing some deaths. Based on his research, Foster recommended anglers carefully remove even deeply imbedded hooks. If the hook can not be removed, then it seems better to leave about 18 inches of line attached. Perhaps, someday, these findings will reach C&R anglers, the biologists who are researching C&R and publish C&R guidelines, and TV anglers who teach by their example. Another good idea is to carry strong wire-cutting pliers. Cur off protruding barbs in the throat and the hook shank falls free easily. Texas researchers recently compared the mortality of largemouth bass hooked with live bait and artificial lures. Their main finding: "there is no biological justification to regulate use of live bait to catch bass" has been widely publicized. Other findings may help anglers make appropriate adjustments in technique. In two separate tests, largemouth bass in a private water were landed by TPWD anglers using Carolina-rigged scented plastic worms, crankbaits with multiple treble hooks, and live carp fished with either a Carolina rig or a float. To simulate normal fishing conditions, anglers with different levels of expertise were used. While fishing with floats, anglers were instructed to delay hooksets until floats went completely under, simulating the way typical amateur anglers fish with unattended rods. Under all other conditions, anglers were to strike immediately upon feeling a hit. Captured bass were immediately examined to identify hook-related injuries. When bass were hooked deep in the throat, the line was cut and hook left in place. (TPWD did not identify whether the cut was made in the traditional way near the hook, or with line remaining outside the fish's mouth.) Bass were then kept in a large holding net over a 72-hour observation period to determine short-term mortality rates. Sixty bass were taken using each method. Tests were made in August, when water was warm and stress and mortality are normally high. The average mortality under these worst-case conditions was 22 percent. Carolina rigs with scented worms caused the highest mortality, followed by live carp used under floats, crankbaits, and Carolina-rigged carp minnows. TPWD biologists concluded that the timing of the hookset appeared more critical than the type of bait used in the determination of short-term death rates. The data show bass hooked in the throat had poor survival odds. Evidently, largemouth bass took both lures and live bait fully into their mouths almost immediately. The bass pros' advice to strike without delay is important to reduce fish mortality. Angling techniques that delay hooksets should be avoided. Carolina-rig and worm combos likely killed more fish because the loose-floating leader prevented immediate detection of some strikes and flavored worms are easily swallowed or held in the back of a bass' mouth. Eighteen percent of bass taken on rigs with worms were throat-hooked. In contrast, Carolina rigs with live bait and live baits under floats caused less mortality, likely because live preyfish are often held in a bass' mouth for a few seconds, killed, and turned to be swallowed headfirst. This gives anglers a few seconds more to detect hits before baits are ingested. The decision to delay hits when live baits were used with floats and to strike immediately with Carolina-rigged baits likely caused the different mortality rates of these two techniques. Nevertheless, 10 percent of bass hooked on Carolina-rigged live baits were hooked in the esophagus. It is no surprise that crankbaits are less likely to be swallowed, as their artificial nature is immediately detectable to fish. When fisheries are managed primarily for C&R or trophy bass production, it may be appropriate to ban use of multiple rods to reduce delayed hooksets, or to limit lures to items unlikely to be swallowed. In any case, C&R sportsmen will want to avoid techniques that delay hooksets, like fishing with unattended rods. The TPWD study showed that bass hooked in the tongue and esophagus had about a 50 percent chance of dying, while bass hooked in the lips mouth, jaw, roof of mouth had 25 percent or less mortality. Interestingly, only 12.5 percent of gill hooked fish died. This finding suggests anglers who kill and eat or mount gill-damaged bass because "they are unlikely to live" are in error. TPWD also compared the survival of bass when they were bleeding and when leaders were cut and hooks left in the fish. Removing hooks improved bass survival when bass were not bleeding. But there was little difference in mortality when bass were bleeding or hooks were left in the fish. Anglers practicing C&R rather than to eat bass might note these findings. Fish caught with only superficial wounds are likely to survive release. Small, deeply-hooked and bleeding bass likely should be eaten, rather than released to die later. But lunker bass are so valuable that they should be immediately released, even if they are bleeding or deeply-hooked. Remove the hook if posible. Leave an 18-inch leader if you can not remove the hook. Ralph Manns Author Information. Ralph Manns is a distinguished outdoor writer whose materials appear in popular publications such as In-Fisherman and other outdoor magazines. Ralph is a strong proponent of conservation and proper care of the great bass fisheries and water resources that we must manage and protect as anglers. His articles always encourage proper handling of bass by anglers, in livewells, and during weigh-ins.
  4. Be aware that after a few casts, there is no silicone left on your line. That is why KVD is more effective than Reel Magic, which is basically silicone. Water will not remove KVD Line and Lure Conditioner.
  5. Just to note that the people at Smooth Drag are really nice and helpful. They can answer any question on drags for a variety of reels.
  6. Dick's sells the Field and Stream Series rods for $40 and they are really nice rods.
  7. I do not know what WalMart sells for reel lube, but it is best to use quality lubes on your reel. I use SuperLube on gears (Superlube.com), Cal's drag grease from Smooth Drag (SmoothDrag.com) and Yellow Rocket fuel on my bearings (lakeforktacklerepair.com). Soak your bearings and metal gears in lighter fluid, or acetone. Clean all other parts on the reel with a solution of Simple Green and hot water. Dry all parts well before lubing. Do not use WD-40 on anything on, or in your reel.
  8. Another Citica fan here. Two 200D's, three 100DSV's and three 200E's. Easy to maintain, solidly built and high performers.
  9. I fished frogs for a very long time with 20lb mono in grass and had no problem. I do now use 30lb braid just to try something different. Mono took the guess work out of the "magic pause" before setting the hook.
  10. Airborne, you are correct, fish it like a spinnerbait (same rod), or a swimming jig. Everyone has their own take on trailers, to include none. You just have to experiment to see what works at the moment. I often use a 3.5" soft belly swimbait on mine.
  11. I don't know squat about rod quality, I only know what feels comfortable for me, but after handling Skeet's rod and the BPS Carbonlite in the store, I settled on the Carbonlite 7' MH for worming. It just felt so light. I have it rigged with a Citica 200E and it is very comfortable to fish with all day. The old wrist does not hurt at all. Skeet's rods may be the ticket for others.
  12. Some good advice. Use backing for all lines and save yourself some money for good line. I even go so far as to measure new line with a line counter when I spool it on, then write how much I used on the spool of new line. Amazing how much line you can get from a new spool of line with some careful planning on backing and new line.
  13. Shoot an email to Shimano and one of their techs will respond with the information. I usually get a same day response. I use their Customer Service feature on their web site
  14. The line guides are PacBay titanium carbide. Very fine line guides.
  15. Hey guys, the line guides on the BPS Carbonlite are PacBay titanium carbide. Top of the line inserts.
  16. Received a BPS 7' MH Carbonlite rod for Father's Day and what a great rod. I have it paired with a Citica 200E and 14lb BPS Floro and it worm fishes like a dream. The rod is so light and sensitive that I did not want to put it down at the end of the day.
  17. I have been reading on several forums that the relatively new Berkley Trilene 100% Floro is getting favorable use. I have used BPS floro on my baitcasters for two years now and like it a lot. I do not use floro on my spinning reels having found that BPS Excel 8lb green line serves me well when I infrequently use a spinning rig.
  18. Not for high RPM bearing like the spool bearings. For those I use Yellow Rocket fuel. Having said that, I have read where salt water anglers use it in their bearings for its anti corrosion properties. I would guess that most salt water anglers do not have to cast for max distance like bass anglers do.
  19. I cannot believe that it is of lessor quality just because it is sold at WalMart. That would not go well for PowerPro. I am sure that volume sales enables WalMart to sell it for less.
  20. I use it to lightly lube my worm gears and plastic gears. I also use it in my drive shaft bearings, not on the spool bearings. If you are prone to use only oil in a pinion bearing instead of grease, Reel X is the way to go in the pinion bearing. I order mine directly from the company. It is a great product.
  21. Carrot Stix, this may help you. USE SWIVELS ON Carolina rigs Fluke rigs In line spinners (If line twist occurs) USE SNAP SWIVELS OR SWIVELS ON Standard Spoons Mepps Syclops TIE DIRECT TO Buzz baits Chuggers (or split ring/duolock) Jigs Frogs/rats Prop baits Spinner baits Stick baits (i.e.Zara Spook) Tail spinners Weedless spoons Weight forward spinners TIE TO SPLIT RING OR DUOLOCK SNAP Crank baits Lipless crank baits Jerk baits Blade baits Jigging spoons* * Swivel if desired
  22. I have been doing a survey of various forums and the two names which come up most often as reasonably priced excellent floro are InvizX and Berkley Trilene 100% Floro. The latter surprised me, but it is getting rave comments from users. Not many like Berkely Vanish.
  23. I picked up a 6'6" MH Gander Titanium on sale last winter and have found it to be a great rod (especially with 25% off). I cannot compare it to a MOJO since I do not own one.
  24. Tim Horton demonstates the Money Hound on the Bass Pros TV show. He was fishing the 3.5" version in the Black Lab color on 50lb briaid and a 5/0 EWG hook.
  25. I know that Diawa makes Cabelas spinning reels and Cabelas has been open about it.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.