Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 08/19/2016 in all areas

  1. Here's a couple smallies I worked fairly hard for today in 20+ FOW. Both caught on a 3.5" green pumpkin strike King tube dipped in Chartruese JJs Magic. 3.54 and 3.08 lbs.
    7 points
  2. Went back to what is quickly becoming the favorite new lake. The pre Dawn still dark ride to ramp included a good bit of zero visibility in Fog: especially in those low lying areas. Last trip the 1.5 squarebill accounted for most of if not all of the better bass. 3lb plus. Today I ran through the same cover, Except this time I burned a 2.5 squarebill. And they were all over it for like 90 minutes. A-Jay
    5 points
  3. I was surf fishing once and had a seagul fly into my line. It didn't flop around much as I untangled it. I had an owl pick up my top water recently, luckily it dropped the bait about 20 feet later without getting hooked. If you want to catch seagulls the best way is to lay flat on your back with a beach towel covering your body. Place crushed up potato chips on the towel. When you feel seagulls eating chips off of your stomach do a sit-up with your arms and legs.
    5 points
  4. Miola was pretty tough for us last night, but it seems that lake has been tough for me just about every time. We caught more numbers up near the river on wobbler and beaver. Had a couple nice frog fish, and a few good blowups, but nothing landed that was anywhere close to 18". I did catch a good crappie on a beaver in about 2' of water, so there is that. Seems the traffic is starting to die down now that school is back in session, which made the lake much more enjoyable than it was last week.
    4 points
  5. How I started was to not worry about catching fish and just think about the techniques. Once that you have that down the catching will happen. This forum is the best place for learning a lot of techniques. Browse the forum and try new things.
    4 points
  6. at this point I already have a lifetime supply of DD22's. If I ever run out...I will buy more DD22's even if they are made on Mars.
    3 points
  7. I never understood why "made in X ( place whatever country name you want here )" has anything to do with the better quality or the lack of when it comes to proven brand names. My now quite old Berkley Lighting Rods were made ..... in Mexico ( I living in Mexico has nothing to do ), every single aspect of the rod is perfect. I have a bunch of Risto Raps that were made .... in Ireland, something you wouldn´t expect from a Rapala lure which traditionally are made in Finland, every lure is perfect. I have a couple of GraphiteLeader Bosco rods made .... in China, you can see quality craftsmanship in every aspect of the rod, GraphiteLeader/ Olympic is a Japanese Brand. I don´t see why PRADCO purchasing Norman and no longer making the lures in the USA will have a negative impact on the quality of the product. YUM products ( owned by PRADCO ) are made in Costa Rica and all the ones you get are quality made, actually where I live you can find tons of discarded YUM baits that have only minor flaws, but those minor flaws are enough to discard the bait.
    3 points
  8. You can't go wrong with a Senko type bait. I really like the Yum Dinger. If nothing else is working I can tie on one of these and almost always catch at least one to avoid the skunk. A lot of people on here like the Ned rig too. I have never tried one, but with so many people backing it that might be worth a try as well.
    3 points
  9. Three weeks in a row the bait monkey got me again, tatula froggin rod, duckett ghost mh rod and this week an aetos from the end of season clearance, plus 600 yds of power pro, some keitech swing impacts, it's like Christmas but better.
    3 points
  10. Same here. Those BioSpawn VileCraw and Strike King Rage Tail Lobster plastics just don't hold up. I went through several bags of each the other day getting 1 maybe 2 fish per bait. Jeff the guy I fish with said they couldn't have made these any more perfect for you to have to buy more. I agreed there is no reason that plastic needs to be that delicate. The Paca Craws seemed to hold up much better for us. We went to using worms pretty heavy since they were ripping the appendages off so bad on the others. Heck I forgot I even had the D Bombs since I initially disliked them so. Wish I would have remembered. Here is literally a sample of what was left. Many never made it back to the boat. One strike or catch and the bait was gone or destroyed.
    3 points
  11. With the Elite Series stopping on my home waters of the Potomac River I had to sign up as a marshal to see how these guys attacked it. I was confirmed for the first 2 days and got as lucky as you can get by drawing KVD for day 2 of the tournament (Friday). After launching we had some time before take-off so in between him doing a couple quick interviews we got to discuss his first day and his plans for day 2. KVD's first day was a nightmare...Other boats in his spots, timing off, best areas trashed by the wind, and lost fish. He told me that it was one of those days where everything that could've possibly gone wrong did go wrong. We spent the first few minutes in the morning on day 2 talking about the weather, he was hoping the wind changed direction enough so that his best area wouldn't be blown out again. After checking the weather a few different times he concluded that it was probably still going to be trashed, but there was enough of a chance to at least go check on it when the tide was right. When we finally took off as boat #60 he started up river to a spot where he saw several good fish in practice. The first thing that jumped out to me was how he drove the boat...It was like a race car driver, not becasue of the speed but the 'path' he takes. He runs right on the shoreline when he can (said it was smoother, and it was), as in you could touch it with a fishing rod, and cuts corners/points literally as close as you can. I knew that in some areas he was in less than a foot of water. It reminded me of race car driver cutting the apex of each turn...Zero wasted time and not even a foot of extra distance traveled. None of the other pros seemed to take it to this extreme, including my day 1 pro (Cliff Prince). It wasn't a far run to his first spot and there were 3 other competitors already there from an earlier flight. He told me that all 3 were there yesterday too and had the very best spot locked down. He wouldn't encroach on them, but said he was hoping to pick up fish on the periphery. Two of the three were Hackney and Vinson and they did not move more than 50 yards all day, for both day's 1 & 2. He caught his first fish quickly on a popper and made a joke about finally having something weigh in....He hung around for about an hour and besides one other blow up that missed his popper there was no action. His next stop was a short distance down river, a stretch of docks with good grass in front. He spent most of the time here using frogs. The new Poppin' Perch, a regular KVD frog, and a new SK toad with 'flat' feet (like a Ribbit). He had two good blow ups just inches behind his toad and had a good fish knock his KVD frog in the air on a blow up...All were decent size fish but they never completely got the bait. He switched colors a few times to see if that would get them to commit a little better but it ultimately didn't result in any more bites. As he was re-tying he pulled out a bunch of the new Poppin' Perch frogs to show me and explained how he worked with SK for almost a year to get it how he wanted....After a few passes up and back with the frog he went into the docks and flipped them with a Menace, but had no bites. From there we ran upriver to a popular creek with another spot where he saw several quality fish in practice. As we rounded the corner and set down he cursed when he saw Gary Klein sitting literally on his waypoint. He showed me on his GPS and sure enough, it was exactly on top of his mark. Klein was getting bit almost every cast on a walking bait and we watched him put his whole limit in the boat...KVD said that he probably got there just a few minutes before we did. He got close to Klein but stayed away from the main spot. The fish weren't as interested in his popper so he said he had to try a walker. He pulled out his walker box and I learned that besides his Sexy Dawg bait, he also really like the Evergreen Shower Blows...He asked if I'd ever used it and when I said it was one of my favorites he agreed and I think his exact words were 'yep, it's a baaaaad sum-b****..." . Even KVD likes a little JDM style . He got no love on the walker since he couldn't hit the main spot, so he started digging in his rod boxes and pulled out a spinning rod. He rigged up a 4" Caffine Shad and started skipping it quickly across the surface, trying to imitate the needlefish we get in the river this time of year. He cycled through colors every few casts before finally settling on one. This was the ticket for him as it resulted in 4 fish to fill his limit in the next hour or so. Nothing huge, but he was happy to get 5 after the disaster on day 1. The tide eventually brought too much dirty water into the area and it was about the right time to go check on his primary spot. We headed down river and as we got closer he looked over holding up his crossed fingers hoping for a little luck. Unfortunately, the wind had it trashed again. He still gave it a few minutes before giving up and we ran back up the river. We bounced around to a few more areas but he wasn't able to connect on anything else that helped him. I know a lot of that is a little vague, but if i went into all the details this post would 4 pages long! Honestly, the actual fishing part was awesome...But the real highlights to me we the conversations about tackle, strategy, locations, and everything else. I asked about a lot of his baits and colors and the level of detail he considers for everything he has is impressive. There is a reason/purpose for everything he uses and/or has his name on. For example, we talked about the Caffine Shad and he told me that he designed it specifically to be different from the Super Fluke. He said he wanted it to fall completely horizontal like a stick-bait instead of gliding around like the fluke. He also told me that they have the Jr sized Rage Bug in the works . His name on the package isn't just marketing, if it's got KVD on the package it's because he either designed or modified it to his liking. The thing that impressed me the most was how well he knew the Potomac. He knows this river better than any local I've met, which obviously includes me too. I'd like to think I know this river better than most and he was on another level. He never went to an area that I haven't been (and neither did my day 1 pro), but the level of detail about each area and the history he knew was insane. A few of the places he hit were some of my favorite areas and he had those places dissected to such detail that I never once thought "I wonder if he knows about 'XYZ' in this spot"...He knew it all. I know he has a long history on this river, but even still it's unreal to me how much detail he knew. He couldn't have been a nicer guy and was very easy to talk to. We talked quite a bit about some other waters in the area like the Upper Bay, James/Chick rivers, Gaston, and Kerr which was fun...Nothing like comparing strategies with greatest of all time . I know in his mind he was probably fuming since he was having a tough tournament, but you never would have known it from talking to him. At the end of the day I helped him bag his fish for weigh in and with a handshake I thanked him for the day wished him good luck with the rest of the season and he wished me good luck with rest of mine (which was cool, even though I'm just small time). It was the best day I've spent on the water and I never even made a cast. I also don't want to overlook my day 1 pro, Cliff Prince who was also great...But I'd be writing all day/night if I put everything that happened on both days in text....I'll just end by saying that if the Elites ever make a stop in your vicinity you should jump on the marshal opportunity...Even just hanging out before launch or at weigh in is awesome, every single pro was friendly and approachable. It's worth every penny and every second.
    2 points
  12. Just got my first batch of crankbaits since Norman was bought by PRADCO. Made in Guatemala. I was very sad to see that. I always looked forward to seeing the American Flag on the front of the packages... End of an era.
    2 points
  13. 2 points
  14. im pretty sure this one is over. inline spinners will catch anything. trout, bass, pike, musky, bluegill, catfish, shad...
    2 points
  15. FYI Ned heads do come weedless now. It's the only way it will work in my lakes.
    2 points
  16. Hey guys, it is quality control at the factory that is causing the problems. To up root a manufacturing center and move it can have an enormous negative impact on quality control. Remember, we now have new management and workers who may not share the history or love of the company or product. The new individuals sit at a table and put the products together, not caring if the product is good or poor. The new employees have quotas to make and they will make them, one way or the other. With all of the government regulations; taxes; ACLU; EPA; minimum wage; workers' compensation insurance; health/dental insurance; pension plans, and the list goes on and on, why in the world would PRADCO want to continue to manufacturer anything in the good ole USA when they can go out of country and produce a product close to the USA standards but without all of the baggage of the United States? This is magnified with products with a very slim profit margin. When sales of the products start to fall then PRADCO will improve its quality control. Until then, it is what it is, like it or not. And I love a special Norman crankbait for the Historic James River. Hopefully I can find some made in the USA on the Internet and scoop them up before they are all gone.
    2 points
  17. After spending last night sorting through my tackle to get ready for my vacation on Cape Cod i was staring at my $1 Walmart spinner that ive never used. Decided to hit my local lake at night right after the rain and got this. Had another one that dwarfed this one but my stupid ass tried to heave her up while on a small bridge. It was inches away from being landed until the line broke off while rubbing on the stone ledge. this catch barely takes away from the sting but what ever.
    2 points
  18. I've had my Lew's Tournament MB for some time and see no reason to ditch a well built, great fit to the hand, top quality company, perfectly working reel. You know the grass is always greener on the other side until you get there and find it has dog crap all over it. I did score a Tatula on eBay the other day. Just for a similar reason. I wanted to try one just to see if it was all that. I somehow feel its a huge hype on these being the greatest reel known to mankind. Oh I know they must be a quality reel or there wouldn't be the following they have. I just like you wanted to do my own evaluation on the water on my rod catching fish and see if I liked the feel. I will know for myself by this weekend I hope.
    2 points
  19. If these were your current rods and you had one more reel (Daiwa TATULA-100HS 7.3:1 ) with no rod what would you pick out of the Aetos that are on sale? I Guess Heavy is the logical choice as I don't have a true Heavy rod. Whats your opinions? Lew's Tournament 7.5:1 on a Fenwick Aetos A741MFC Worm 7'4" MF Lew's Tournament 7:1 on a Fenwick Aetos A701MHMFC Spinnerbait 7'1"MHMF Lew's Speed Spool LFS 5.6:1 on a Fenwick HMG GT72M-F-CB Crankbait Rod 7'2" MF Lew's Speed Spool LFS 6.4:1 on a Fenwick HMG GT72M-F-CB Crankbait Rod 7'2" MF Lew's Mark Rose signature series 7:1 on a St Croix MBC70MHFJigs now 6'10" MHF Bass Pro Qualifier 7:1 on a St Croix MBC711HMF Flippin' 7'11" HMF Daiwa TATULA-100HS 7.3:1 ?
    2 points
  20. Awesome fish.Been fishing deeper for years and a avid user of the percentage triangle. even small ponds will have what it takes. Have alway caught the big ones on lakes I have never fished before. Good luck all, I know its slow but the bigger ones are moving now. Just wish I could get more time off from work to fish.
    2 points
  21. RMcDuffee726, you sound upset. Here are my two biggest bass from southern NH this year (First is 6, 2nd is 7) and my wife's 3+. Hopefully this cheers you up a little . Just like Mainebass is always describing, move away from shore and shallow water in the warmer months and hit the first drop off to deeper water. These came on a chatterbait and a spinnerbait, fished in the 10 foot range of a steep drop off that goes from 5 to 16 feet pretty quickly. Most lakes hold big fish like this, it just takes some time to learn the lakes and some basic electronics to figure out depths. You will get on them soon if you put in the time. Good luck.
    2 points
  22. Lew's may be introducing some new models, but my MB is very new to me so the love affair hasn't cooled yet. The Tournament MB is a very nice reel now and will still be a very nice reel when new models come out. It is us that think we need the latest and greatest.
    2 points
  23. I'm not gonna even ask how you know this or why.
    2 points
  24. Just fished the past 10 days in a row, and finally took a day off because I needed to restock baits... 92 Days Consistent Catching Bass, and counting... time to get back to it! WolfyBrandon
    2 points
  25. Heat, whether from sitting in a hot car, or on the deck, is going to have that affect on most soft plastics. The good news is that they will regain their original density as they cool. The bad news is they can take on a shape other than the original, so try not to store them bunched up. You could try wrapping the bags, or boxes in a cool wet towel and keep them in your trunk. A cheap styrafoam cooler with a couple of cold packs is another inexpensive option.
    2 points
  26. He didn't mention them by name, the discontinued color on the Caffeine Shad he liked was a sort of smoke/clear with gold flakes...Reminded me of a shiner. He didn't keep them a secret, it was just part of a conversation where he was talking about how some of his best/favorite colors didn't sell very well so they got pulled. He was much more concerned with the color on the soft jerkbait than his flipping baits...For flipping it was pretty basic, blue craw in clearer water and black/blue in dirty water. Cliff was awesome as well, I feel a little bad that the day with him seems like it was a secondary thing....But pretty much anyone would be next to KVD . I launched his boat for him which was pretty cool, don't really know why since I've obviously launched mine countless times...But when it's a pro's boat with $20k in electronics staring you in the face it's just a little more fun . (I offered to launch/load KVDs boat too, but he had his wife and sons there and he said they would help him) He hadn't fished the Potomac prior to coming for pre-practice in June so it was still pretty new to him. I actually grew up in Orange Park, FL which is about 40 minutes from where he lives in Palatka and both are on/near the St Johns River...So we compared the Potomac and St Johns quite a bit throughout the day. He started by running down to Aquia and I was surprised to see only 4 or 5 boats fishing the beach. After a while with zero bites he ran back into the creek and planned on hitting the RR bridge with a crankbait, but found Clausen already there fishing it so he bypassed and went to some docks in the back. Don't know how much Clausen caught off the bridge but he had a good first day so he probably did pull a few from it. The back of the creek didn't produce either so he ran back up the river and hit a couple main river spots, still no success except for a couple blue cats. He finally ran all the way to the back of Occoquan and picked up 2 keepers on a finesse jig. He picked up his other 2 keepers by flipping grass below the 95 bridge. He just ran out of time after that...He really wished that he just went into Occoquan first, he was apparently thinking about it in the morning. He was in good water all day, the fish just didn't cooperate for him. He threw a crankbait a lot but just couldn't get the bass to eat it. He said back home on the St Johns the crank pattern he was running is very reliable in the summertime so it's his comfort zone. It was a fun day despite being tough. Cliff was really friendly and told me to give him a call if I'm back down in FL, said he'd put me on some fish...I returned the offer to him if he makes it back up to the Potomac, Upper Bay, or anywhere else he might need to do some pre-practice. I'm sure they all hear that everywhere they go though ...
    2 points
  27. Shimano Calcutta 300/301D is in your price range excellent swimbait reel and fresh/salt water usage. Tom
    2 points
  28. The new stick: Gonna pair it with my Pflueger Supreme XT
    2 points
  29. Some of my friends are going back to school and I'm just sitting here like ?
    2 points
  30. Yes. Especially pike.
    2 points
  31. Grabbed a Fenwick HMX MH casting rod in the end of summer sale. Shout out to the latest sales/deal thread. Just gotta pick a budget reel to go with it.
    2 points
  32. casting a 2 oz. bait can easily be done on a flipping rod and pretty much any low profile reel with lower speed gears , as for line , you only need 15 lb. which you can fit plenty on a low profile reel ..
    2 points
  33. 2 oz swimbaits are far from being BIG swimbaits, a H rod of whatever brand a reliable AbuGarcia C3 reel will do the job with less than $150.
    2 points
  34. Bow down to the master
    2 points
  35. Don't know about the CQ14 being the GREATEST reel - but it's a pretty dang good one... Actually - a lot of those gold-colored reels are pretty fair fishing machines...
    2 points
  36. Bunnielab, I work with Z-Man and wanted to address your concerns directly. Sorry for the issue you experienced with the TRDs - I don't think we've received feedback like this, so it is definitely not typical. We stand behind our product 100% and will gladly send you some replacements if you like, just let us know. We have not changed the formula for this bait, but it sounds like maybe the couple of baits that tore easily may have inadvertently had a slightly higher salt content or may have been exposed to moisture inside the bag, which could explain the spongier texture. One difference between the TRD and the ZinkerZ is the amount of salt impregnated in each. The ZinkerZ is molded with 45% salt by weight to cause the bait the sink and counteract the buoyancy of ElaZtech, while the TRD is made with only 25% salt, which allows it to retain its buoyancy. The reason we impregnate the TRD with salt is to duplicate the texture of a worn ZinkerZ - once the ZinkerZ loses some salt, it takes on a spongier feel and becomes buoyant, and those are characteristics that Midwest finesse anglers feel increases the effectiveness of the baits. That said, it's difficult to maintain 100% consistent salt content in these baits, which is more noticeable in ElaZtech than with conventional plastics given their buoyancy and stretchiness. Whether you're using the ZinkerZ or TRD (or Hula StickZ for that matter) for Ned Rig applications, one thing we recommend is that you stretch and rub the baits before using them to loosen up and remove some of the salt. As noted above, this adds to the baits' buoyancy (allows them to consistently stand up off the bottom at rest and slows the sink rate) and replicates the spongy feel of a well-worn bait that is so desirable. Salt effectively stiffens the baits as well, so stretching and rubbing them makes the baits more pliable and limber and ultimately adds to the fish catching action. If you would like us to send you some replacement baits, just let us know!
    2 points
  37. Between work and school just starting up I've been busier than a one legged man in an...nevermind. Anyway, the last couple days I've managed to get a little time between class and work to hit the pond. I was also finally able to get my very first fish on frogs. They aren't giants or anything but the way they hit that Pad Crasher is almost addicting.
    2 points
  38. The 2 lakes I know well and well known are Castaic and Casitas in SoCal. Started fishing Casitas in '58 and Castiac in '71 shortly after each lake opened to fishing. When you see a lake filling and fish it for decades there isn't much you don't know about them. Both lakes received Florida LMB in 1971 and both had been stocked with adult size northern LMB from nearby reserviors. In '71 I caught my 12.25 lb PB NLMB from Casitas on a jig I made. '81 I caught a 18.6 lb FLMB off the same point on the same design jig. Casitas remains my favorite bass lake because there isn't any water contact sports allowed....no jet ski or water ski allowed and the terrian is oak covered hills with lots of wildlife. Castiac is about 50 miles east of Casitas and allows water contact sports like jet and water skiing. Being closer to Los Angeles Castiac has higher boating, fishing pressure and sage brush covered hills very few trees. Caught my PB 19.3 lb FLMB at Castiac on the same design jig in '93. Between these 2 lakes I have caugh 5 bass over 17 lbs and more giant bass have been caught over 18 lbs than all other bass lakes combined in the world. Casitas may rebound to it's former glory, Castiac may never recover due to accidental introduction of stripped bass into the lake. Tom
    2 points
  39. I bet if you go to Guatemala and buy a norman, it's made in the USA.
    2 points
  40. Because the tag says $200 budget im assuming you are looking at $100 for a rod, and $100 for the reel. I would get a fenwick aetos because they are on sale for $95 right now, and either a lews speed spool or daiwa tatula ct. Both can be had on ebay for $100 or less.
    2 points
  41. 2 points
  42. Picked up my bass raider 3 or 4 months ago and I absolutely love it. I did a bunch of mods including a casting deck and the deck is rock solid. It's 3x more stable on my deck than standing in some of my friends jon boats.
    2 points
  43. Here's my stance on the ethical part. If everyone who was licensed always took their creel, the laws would have to be changed very quickly to avoid species endangerment...and that's not considering all the people who poach. So I think whether you fish for sport or to put food on the table, taking a creel very often is plain irresponsible, even if you are within the legal bounds to do so, as many populations can't take that kind of pressure. So I think the "catch and release" sport fishing becoming more popular is a good way to offset the people who don't know any better, or worse, know full well and do it anyways. I'm not against keeping fish, but be reasonable, they aren't an infinite resource obviously, even though some seem to treat them as such.
    2 points
  44. I can't fish cranks in the lakes I fish for smallmouth due to zebra mussels. My solution has been to fish a Kietech on a 1/4oz head with a slow, steady retrieve.
    2 points
  45. You've got the perfect storm of issues there. Light lures with less than optimal aerodynamics, stiff line and a Rod that's likely not loading well. Lure weight ranges are subjective suggestions and the sweet spot is usually near the middle of the posted range.
    1 point
  46. If you are catching toad fish during the day it should work at night, goes for most lures. Tom
    1 point
  47. Different strokes for different folks. Some people bring a boatload and some people bring very little. If you're trying to get rid of stuff, go through all your baits, keep one or two key colors, and take something out if you haven't used it in the last month or so.
    1 point
  48. Best example of this happening currently is the idiocy underway up on Mille Lacs. For years, everyone, their brother and their uncle Stu went out on the lake and took a limit of walleyes. ...toss in a couple poor year classes...and guess what? Not as many walleyes! ...and they're surprised....and they're blaming muskies, pike and...smallmouth bass. ...so the Minnesota DNR has now caved into political and money based pressure from Gomers who don't know conservation from their left rear cheek...and raised the limit on smallies...and now there's party boats going out to do to the smallies exactly what was done to the walleyes. Effect on walleye population? Pretty much nothing...and now they've had to enact special walleye regs to try to save that fishery... Sometimes, as concerned anglers, we have to do what's right rather that what's legal and not take a limit...and we need to help others understand why this is important. I'll get off my soapbox now...
    1 point
  49. I have also had great experiences with the Hampton, VA BPS customer service. I have exchanged rods, returned rods without issue. The fishing manager that I became friends with is gone, and I'm much less trusting of those there now. However, one of my exchanges happened under the "new" staff and went fine. But every store is different simply because of the humans working there, IMO. So yeah, bad experience for some? Absolutely. My .02 on the rods: I own several Carbonlites and highly recommend them. I never liked the old Mojo rods, but the new blanks are much lighter than previous. That said, if weight is an issue, I think the CL are more tip light than the Mojos, even the new ones. I also have St. Croix, but a Premiere (tip heavy) and a Legend Tournament (awesome). Did have an Avid but felt it was tip-heavy, too.
    1 point
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.