Bass master 101 Posted December 17, 2020 Posted December 17, 2020 I recently started to disassemble my lews mr1sh speed spool I removed the handle and drag knob and took the 2 washers off i put it back together with the 2 washers opposed not nested() and put the handle back on now it's not spinning freely when I tighten the drag down Quote
Global Moderator TnRiver46 Posted December 17, 2020 Global Moderator Posted December 17, 2020 I’ve had that happen with several reels, maybe try flipping the washers back the other way. I’ve gotten them all to work normally it just takes some fiddling Quote
Super User FishTank Posted December 17, 2020 Super User Posted December 17, 2020 Hi, welcome to the forum.... Things like this are always hard to diagnose without seeing the reel first hand but I have a few guesses.... If I understand it correctly, you took the handle off, drag star, and washers but did not open up the reel? First, it could be the sleeve on the main drive shaft is not set correctly. Generally these have a notch that inserts into a plate and a washer that sits on top of it. Once the tension is off of it when it is removed it can get out of place. Next, the drag star has to match up correctly on the shaft. There's usually a lip on it that the drag star has to rest on. If these get out of whack, it can cause the reel to bind up. Again just guesses but you can find the schematic here under the 2019 tab. Good luck... Also, DVT will probably have an expert opinion as well. https://strikeking.app.box.com/s/ibijnxfhtyggviik0wkj6ey09ngjl0yp/folder/87314225008 Quote
Super User J Francho Posted December 17, 2020 Super User Posted December 17, 2020 Do you have the exploded diagram? Something is not seated properly or put back together in the wrong order. The schematic will help you verify it's all in place. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.