Jump to content

Recommended Posts

  • Super User
Posted

My boat weighs in at over 4500 lbs.  I am looking for a 1/2 ton Chevy to tow it with.  I am in hilly terrain.  Most of the trucks on local lots have a 3.23 rear axle with a 5.3 liter engine.

 

Do any of you have a similar weight boat and tow with a truck like that?  I really don’t want to make a $40000 mistake.

  • Super User
Posted

Do they have a 3.73 option? It's going to hurt your mileage but I think you'd be much better off in hilly terrain.

  • Like 1
  • Super User
Posted

I don't tow that much with my 1500 Silverado...but I easily could with the towing package mine has.

 

If you're buying new - get the 'Max Trailering Package' - then you're good to 10,000 lbs (they say 13,000 but you always want some leeway on that)

  • Super User
Posted

My folks tow a tandem axle fiberglass Warrior 2090 with their 2016 1/2 ton Silverado, I believe it has a 5.3 liter V8 engine.  I don't know what total towing weight of that thing is, but the dry weight of the boat/motor is almost 4000 pounds I believe.  The trailer itself looks really heavy too.

  • Super User
Posted

My guess is 1/2 ton pickups with V8 engines tow 90% of the boats on the road.

Towing package gets you over size radiator, transmission cooler, factory hitch wiring and a towing transmission setting, it's the way to go. Your trailer needs brakes!

Tom

  • Like 1
  • Super User
Posted
1 hour ago, gimruis said:

My folks tow a tandem axle fiberglass Warrior 2090 with their 2016 1/2 ton Silverado, I believe it has a 5.3 liter V8 engine.  I don't know what total towing weight of that thing is, but the dry weight of the boat/motor is almost 4000 pounds I believe.  The trailer itself looks really heavy too.

 

10 minutes ago, WRB said:

My guess is 1/2 ton pickups with V8 engines tow 90% of the boats on the road.

Towing package gets you over size radiator, transmission cooler, factory hitch wiring and a towing transmission setting, it's the way to go. Your trailer needs brakes!

Tom

Ya - my 2001 Silverado 1500 with the 5.3L has the factory installed towing package - with all that Tom says. I'm rated up to 11,000 lbs with it.

 

maxresdefault.thumb.jpg.b56c92bf3a55064bc9bc03f9baa8a808.jpg

  • Super User
Posted

I went with the 6.2, and couldn't be happier.

  • Like 3
  • Super User
Posted

The problem is not the 5.3, it's the 3.23 gears. Those are fuel economy gears, not towing up and down hill gears.

  • Super User
Posted

You're right, I have the 3.73 gears in mine.  I think you can go with a higher gearset as well.

  • Like 1
  • Super User
Posted
5 minutes ago, J Francho said:

You're right, I have the 3.73 gears in mine.  I think you can go with a higher gearset as well.

Ya, mine has the 3.73 as well.

Posted

Truck should handle 4,500 lb easily enough but 3.23 is pretty tall for towing. You'd probably want a 3.73 or 3.92 (or whatever's close).

 

  • Super User
Posted

My issue is all of the Chevy and GMC dealers are only stocking the 3.23 and ordering one like I usually do doesn’t seem to be an option right now.  The engine doesn’t concern me it’s the axle.

Posted

The transmission has a lot to do with determining rear ratio too. The GM/Ford 10 speed has a 1st gear of 4.69 and the ratios are much closer together than the old 4 speed autos. You don’t need as steep a rear gear with them.

  • Like 1
  • Super User
Posted
2 hours ago, J Francho said:

I went with the 6.2, and couldn't be happier.

Me too. 2020 Z - 71 RST 6.2  3.23 10 speed trans

20200501_161401.jpg

  • Like 2
Posted

I personally feel any v8 1/2 ton truck would do just fine.  I'd want 4x4 for sure just for the weight and steep wet ramps. Other than that I'd be satisfied with any of the new trucks on the road for any bass boat.

  • Super User
Posted

That's nice.  Mine is a rusted out 2010, lol.

  • Like 1
  • Super User
Posted

It’s not that I don’t have a good truck to pull with, it’s just that I want something smaller.

D7839A88-4078-4308-B6ED-6A0DE8C30850.jpeg

  • Like 1
Posted

Each truck will have its own tow rating based upon engine, transmission and gear ratio.  That can range normally from 5,000 - 11,000 pounds in the same 1/2 ton truck depending on the configuration.  I agree with the others who advocate the 3:73 ratio, especially in hilly terrain.

 

The dealership should be able to provide the actual rated towing capacity for each truck you look at. If I were in your position I would want a minimum rating of 7,000# to compensate for the hilly terrain.  Don't just go with the salesmans claim that "it'll tow anything".  

Posted
13 minutes ago, Jig Man said:

It’s not that I don’t have a good truck to pull with, it’s just that I want something smaller.

D7839A88-4078-4308-B6ED-6A0DE8C30850.jpeg

I went from an F250 diesel of that vintage to a max tow Ecoboost and was more than happy. It had either 3.55 or 3.73 (It's been five years) and it did everything I needed. 

I couldn't find the Chevy I wanted when I bought it either.

  • Super User
Posted
5 hours ago, Jig Man said:

It’s not that I don’t have a good truck to pull with, it’s just that I want something smaller.

D7839A88-4078-4308-B6ED-6A0DE8C30850.jpeg

Very nice. Why are you looking at changing brands?

  • Super User
Posted
3 hours ago, slonezp said:

Very nice. Why are you looking at changing brands?

Ford is wanting $19000 boot plus I really am a General Motors kind of guy.

  • Like 1
Posted

When it comes to gas trucks always try to get the lowest available gear ratio, 3.73 would be fine but 4.10s would be better. In theory higher gears like 3.23s get better fuel mileage, but in a real world situation where your working the truck that's rarely ever the case, the engine doesn't have to work as hard with lower gears so it will often get better fuel mileage.

Posted

F150 has the highest towing and hauling ratings of any 1/2 Ton. The 3.5L Ecoboost is a beast...and there is a new Power Stroke diesel hooked to a 10 speed automatic! That thing should pull your house! 

Posted

I drive a 2016 ram 1500 with the 5.7 v8 which was rated at 11600 or something like that and although I’ve never towed a boat bigger than a new 18ft ranger with it, I have towed my companies plumbing construction trailer with it a few times. 1000 ft of copper and pvc, 80g water heater, a boiler, softener, and a good 2-3k lbs of fittings, tools, unistrut, gastite, concrete, mixer, chop saw etc and my truck never felt like it was underpowered in any way. Trailer has to be 7-9k fully loaded. Definitely handled it a lot better than my old work van which was a late 90’s ford with probably about 75 hp left. If I saw a hill coming up I would have to floor it and build up as much speed as I could for a quarter mile before so I wouldn’t stop halfway up the hill. That van was a death trap, really glad they bought me a new one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.


  • Outboard Engine

    fishing forum

    fishing tackle

    fishing

    fishing

    fishing

    bass fish

    fish for bass



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.